CJ1W-FLN22

Connect to Multivendor Controller Networks

Categories: , ,

Description

• Conforms to FL-net, a quickly spreading standard.

• FL-net is a multivendor FA network at the controller/machine level that is based on Ethernet. (It uses UDP/IP.)

• FL-net supports message transmissions and cyclic data transmissions. (Message transmissions are also possible using FINS communications.)

• A CJ-series PLC can be used to interface communications between Ethernet information networks, OMRON’s Controller Link FA network, and DeviceNet field bus.

 

International Standards

  • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
  • Contact your OMRON representative for further details and applicable conditions for these standards.

FL-net Unit

Unit
type
Product
name
Specifications No. of
unit
numbers
allocated
Current
consumption
(A)
Model Standards
Communications
interface
Communications
functions
Max. Units
mountable
per CPU
Units
5V 24V
CJ1
CPU
Bus
Unit
FL-net
Unit

1549_lu_1_1
100BASE-TX With FL-net Ver. 2.0
specifications
(OPCN-2)
Data links and message
service
4 1 0.37 CJ1W-FLN22 UC1, CE
Note: 1. There is no accessory for the CJ-series Ethernet Unit.
2. This unit cannot be used with the Machine Automation Controller NJ-series.

Recommended Network Devices

The following products are recommended for use with the FL-net Unit.

Part Maker Model number Specification
Twisted-pair cable 100BASE-TX
Fujikura F-LINE-E 0.5mm × 4P STP (shielded twisted-pair) cable: Category 5,5e
Note: Impedance is limited 100 Ω.
Fujikura CTP-LAN5 0.5mm × 4P UTP (unshielded twisted-pair) cable: Category 5,5e
100BASE-TX
Fujikura F-LINE-E 0.5mm × 4P STP (shielded twisted-pair) cable: Category 3,4,5,5e
Note: Impedance is limited 100 Ω.
Fujikura CTP-LAN5 0.5mm × 4P UTP (unshielded twisted-pair) cable: Category 3,4,5,5e
Connector
(Modular plug)
STP Plug
Panduit Corp MPS588
UTP Plug
Panduit Corp MP588-C

 

FL-net Unit Specifications

Item Specifications
Model number CJ1W-FLN22
Type 100Base-TX (10Base-T is also possible)
Applicable PLCs CJ-series PLCs
Unit classification CJ-series CPU Bus Unit
Mounting location CPU Rack or Expansion Rack
Number of Units that can be mounted 4 max. (including Expansion Racks)
Transfer
specifications
Media access method CSMA/CD
Modulation Baseband
Transmission paths Star
Baud rate 100 Mbps (100Base-TX) 10 Mbps (10Base-T)
Transmission media Unshielded twisted-pair (UTP) cable
Categories: 5, 5e
Shielded twisted-pair (STP) cable
Categories: 100 Ω at 5, 5e
Unshielded twisted-pair (UTP) cable
Categories: 3, 4, 5, 5e
Shielded twisted-pair (STP) cable
Categories: 100 Ω at 3, 4, 5, 5e
Transmission distance 100 m max. (distance between hub and node)
Number of cascade
connections with repeater hub
2 4
Current consumption (Unit) 370 mA max. at 5 VDC
Vibration resistance Conforms to JIS 0040.
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z
directions for 80 minutes each
(Time coefficient; 8 minutes × coefficient factor 10 = total time 80 minutes)
Shock resistance Conforms to JIS 0041.
147 m/s2 three times each in X, Y, and Z directions
Ambient temperature Operating: 0 to 55°C
Storage: -20 to 75°C
Humidity 10% to 90% (with no condensation)
Atmosphere Must be free from corrosive gas.
Weight 100 g max.
Dimensions 31 × 90 × 65 mm (W × H × D)

 

(Unit: mm)

CJ1W-FLN22

CJ1W-FLN22 Dimensions 1 CJ1W-FLN22_Dim
Catalog Name
Catalog Number
[size]
Last Update
 CJ1W-FLN22 Data Sheet
[474KB]
Dec 09, 2016

Reviews

There are no reviews yet.

Be the first to review “CJ1W-FLN22”

Your email address will not be published. Required fields are marked *



Exclusive products

Special category of products