{"id":1489,"date":"2019-01-03T00:47:51","date_gmt":"2019-01-03T00:47:51","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1489"},"modified":"2019-01-03T00:47:51","modified_gmt":"2019-01-03T00:47:51","slug":"cs1w-clk","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/cs1w-clk\/","title":{"rendered":"CS1W-CLK"},"content":{"rendered":"

\u2022 Large-capacity data links are easily achieved without programming simply by setting data link tables.<\/p>\n

\u2022 Up to 20,000 *1 send\/receive words can be set per node for Units (up to 62,000 words for Boards).<\/p>\n

\u2022 Data links can be performed with up to 4,000 *2 words per node while ensuring data concurrency.<\/p>\n

\u2022 User-set data link tables can be changed while data links are operating. *3<\/p>\n

\u2022 Errors for the entire system can be monitored by using error diagnosis support software and a variety of status flags.<\/p>\n

\u2022 With the token ring mode of Optical Ring Controller Link Units\/Boards, duplex communications paths enable communications to continue normally even if the cable becomes disconnected.<\/p>\n

\u2022 Detecting locations of disconnection greatly shortens time required for maintenance.<\/p>\n

\u2022 Installing Controller Link Units in a CS1D system enables Duplex Communications Units to further enhance reliability. *4<\/p>\n

*1. Supported for unit version 1.2 or later.<\/p>\n

*2. CS1W-CLK[]3 and 3G8F7-CLK[]3 are supported.<\/p>\n

*3. Supported for CS1W-CLK[]3, 3G8F7-CLK[]3, and models ending with “-V1” (CS1W-CLK12-V1 *5 and CS1W-CLK52-V1*5 with lot numbers 0306[][]_[][][] or later ).<\/p>\n

*4. Supported for CS1W-CLK13\/CLK12-V1 *5\/CLK53\/CLK52-V1 *5 and CS1D Duplex and Simplex Systems.<\/p>\n

*5. Discontinuation models in July 2012.<\/p>\n

 <\/p>\n

 <\/p>\n

Controller Link Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Unit
\nclas-
\nsifica-
\ntion<\/strong><\/th>\n		Product
\nname<\/strong><\/td>\n		Specifications<\/strong><\/th>\nNo. of
\nunit
\nnumbers
\nallocated<\/strong><\/td>\n		Current
\nconsump-
\ntion (A)<\/strong><\/th>\n		Model<\/strong><\/td>\nStand-
\nards<\/strong><\/th>\n<\/tr>\n
Communi-
\ncations
\ncable<\/strong><\/th>\n		Communi-
\ncations
\ntype<\/strong><\/td>\n		Duplex
\nsupport<\/strong><\/th>\n		Max. Units
\nmountable
\nper CPU
\nUnit<\/strong><\/td>\n		5 V
\nDC<\/strong><\/th>\n		26 V
\nDC<\/strong><\/td>\n<\/tr>\n
CS1
\nCPU
\nBus
\nUnit<\/strong><\/th>\n		Controller
\nLink Unit<\/strong><\/p>\n
\"1681_lu_1_1\"<\/strong><\/div>\n<\/td>\n
Wired shielded
\ntwisted-pair
\ncable *1<\/td>\n		Data links
\nand
\nmessage
\nservice<\/td>\n		No<\/td>\n8<\/td>\n1<\/td>\n0.33<\/td>\n–<\/td>\nCS1W-CLK23<\/strong><\/td>\nUC1, N,
\nL, CE<\/td>\n<\/tr>\n
Controller
\nLink Unit<\/strong><\/p>\n
\"1681_lu_1_2\"<\/strong><\/div>\n<\/th>\n
Optical ring
\nH-PCF
\ncable *2<\/td>\n		Yes. Unit
\nduplexing
\nand cable
\nloop back
\nare
\nsupported.<\/td>\n		Non-duplex: 8,
\nDuplex: 11
\n(6 Units
\ncomprising 3
\nsets of Duplex
\nUnits + 5
\nNon-duplex
\nUnits)<\/td>\n		1<\/td>\n0.52<\/td>\n–<\/td>\nCS1W-CLK13<\/strong><\/td>\n<\/tr>\n
Controller
\nLink Unit<\/strong><\/p>\n
\"1681_lu_1_3\"<\/strong><\/div>\n<\/th>\n
Optical ring
\nGI cable *3<\/td>\n		1<\/td>\n0.65<\/td>\n–<\/td>\nCS1W-CLK53<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Use the following special cable for shielded, twisted-pair cable.
\n\u2022 ESVC0.5\u00d72C-13262 (Bando Electric Wire: Japanese Company)
\n\u2022 ESNC0.5\u00d72C-99-087B (JMACS Japan Co., Ltd. : Japanese Company)
\n\u2022 ESPC 1P\u00d70.5mm2 (Nagaoka Electric Wire Co.,Ltd.: Japanese Company)
\n\u2022 Li2Y-FCY2\u00d70.56qmm (Kromberg & Schubert, Komtec Department: German Company)
\n\u2022 1\u00d72\u00d7AWG-20PE+Tr.CUSN+PVC (Draka Cables Industrial: Spanish Company)
\n\u2022 #9207 (Belden: US Company)
\n*2. When using a wire-to-optical (H-PCF) cable, use a H-PCF cable (for both Controller Link and SYSMAC LINK) or a
\nH-PCF optical fiber cable with connector.
\n*3. When using a wire-to-optical (GI) cable, use a GI optical cable that matches the specifications.<\/div>\n<\/div>\n<\/div>\n

Accessories<\/h4>\n
\n
\n

The Optical Fiber Cable Bracket is included in CS1W-CLK13 and CS1W-CLK53.<\/p>\n<\/div>\n<\/div>\n

Controller Link Support Boards<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecifications<\/strong><\/td>\nAccessories<\/strong><\/th>\nModel<\/strong><\/td>\nStandards<\/strong><\/th>\n<\/tr>\n
Communications
\ncable<\/strong><\/th>\n		Communications
\ntype<\/strong><\/td>\n<\/tr>\n
Controller Link
\nSupport Board
\nfor PCI Bus<\/strong><\/p>\n
\"1681_lu_2_1\"<\/strong><\/div>\n<\/th>\n
Wired shielded
\ntwisted-pair cable<\/td>\n		Data links and
\nmessage service<\/td>\n		CD-ROM x 1 *
\nINSTALLATION GUIDE (W467) x 1
\nCommunications connector x 1<\/td>\n		3G8F7-CLK23-E<\/strong><\/td>\nCE<\/td>\n<\/tr>\n
H-PCF optical model<\/td>\nCD-ROM \u00d7 1 *
\nINSTALLATION GUIDE (W467) x 1
\nOptical Fiber Cable Bracket x 1
\nPower supply connector x 1<\/td>\n		3G8F7-CLK13-E<\/strong><\/td>\n<\/tr>\n
GI optical model<\/td>\n3G8F7-CLK53-E<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
* The CD-ROM contains the following software.
\n\u2022 Controller Link (PCI) Driver
\n\u2022 FinsGataway Version 2003 (PCI-CLK Edition)
\n\u2022 FinsGataway Version 3 (PCI-CLK Edition)
\n\u2022 Setup Diagnostic Utility
\n\u2022 C Library<\/div>\n<\/div>\n<\/div>\n

Repeater Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/td>\nModel<\/strong><\/th>\nStandards<\/strong><\/td>\n<\/tr>\n
Controller Link
\nRepeater Unit<\/strong><\/p>\n
\"1681_lu_3_1\"<\/strong><\/div>\n<\/th>\n
Wire-to-Wire Model<\/td>\nCS1W-RPT01<\/strong><\/td>\nUC1, CE<\/td>\n<\/tr>\n
Wire-to-Optical (H-PCF) Model *1<\/td>\nCS1W-RPT02<\/strong><\/td>\n<\/tr>\n
Wire-to-Optical (GI) Model *2<\/td>\nCS1W-RPT03<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Using Repeater Units enables T-branches and long-distance wiring for Wired Controller Link networks, 62-node configurations,\u00a0and converting part of the network to optical cable.
\nNote: 1. When using wire-to-optical (H-PCF) cable, use a H-PCF cable (for both Controller Link and SYSMAC LINK) or a
\nH-PCF optical fiber cable with connector.
\n2. When using wire-to-optical (GI) cable, use a GI optical cable (for Controller Link).<\/div>\n<\/div>\n<\/div>\n

Relay Terminal Block<\/h4>\n
\n
\n
\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/td>\nModel<\/strong><\/th>\nStandards<\/strong><\/td>\n<\/tr>\n
Relay Terminal Blocks for
\nWired Controller Link Units<\/strong><\/p>\n
\"1681_lu_4_1\"<\/strong><\/div>\n<\/th>\n
Used for Wired Controller Link Units (set of 5)<\/td>\nCJ1W-TB101<\/strong><\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Controller Link Units can be replaced without stopping the communications of the entire network if a Relay Terminal Block is installed in advance on the Unit in a Wired Controller Link network. Relay Terminal Blocks cannot be used on Controller Link Support Boards.<\/p>\n<\/div>\n<\/div>\n

Duplex Optical Fiber Cable (H-PCF Cable)<\/h4>\n
\n
\n
\n\n\n\n\n
Name<\/strong><\/th>\nApplication<\/strong><\/td>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/td>\nStandards<\/strong><\/th>\n<\/tr>\n
Duplex Optical
\nFiber Cable<\/strong><\/th>\n		CS1W-CLK13 or
\nCS1W-CLK12-V1 * in a CS1D system<\/td>\n		H-PCF cable for connecting Duplex
\nController Link Units Cable length: 50 cm<\/td>\n		CS1D-CN051<\/strong><\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

This cable is used to connect Units in active mode (ACT) and standby mode (STB) in a CS1D Duplex System.
\n* Discontinuation models in July 2012.<\/p>\n<\/div>\n<\/div>\n

H-PCF Cables and Optical Connectors<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Name<\/strong><\/th>\nApplication\/construction<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Optical Fiber Cables<\/td>\nController
\nLink,
\nSYSMAC
\nLINK,
\nSYSBUS<\/td>\n		\n
\"1681_lu_6_1\"<\/div>\n

1. Optical fiber
\nsingle-core cord
\n2. Tension member
\n(plastic-sheathed wire)
\n3. Filler (plastic)
\n4. Filler surrounding
\nsignal wires (plastic,
\nyarn, or fiber)
\n5. Holding tape (plastic)
\n6. Heat-resistant
\nPV sheath<\/td>\n

Two-
\ncore
\noptical
\ncable
\nwith
\ntension
\nmember<\/td>\n		Black 10 m<\/td>\nS3200-HCCB101<\/strong><\/td>\n–<\/td>\n<\/tr>\n
Black 50 m<\/td>\nS3200-HCCB501<\/strong><\/td>\n<\/tr>\n
Black 100 m<\/td>\nS3200-HCCB102<\/strong><\/td>\n<\/tr>\n
Black 500 m<\/td>\nS3200-HCCB502<\/strong><\/td>\n<\/tr>\n
Black 1000 m<\/td>\nS3200-HCCB103<\/strong><\/td>\n<\/tr>\n
Orange 10 m<\/td>\nS3200-HCCO101<\/strong><\/td>\n<\/tr>\n
Orange 50 m<\/td>\nS3200-HCCO501<\/strong><\/td>\n<\/tr>\n
Orange 100 m<\/td>\nS3200-HCCO102<\/strong><\/td>\n<\/tr>\n
Orange 500 m<\/td>\nS3200-HCCO502<\/strong><\/td>\n<\/tr>\n
Orange 1000 m<\/td>\nS3200-HCCO103<\/strong><\/td>\n<\/tr>\n
Optical
\nConnectors
\n(Crimp-cut)<\/td>\n		\"1681_lu_6_2\"<\/td>\nController Link:
\nCS1W-CLK13
\nCS1W-CLK12-V1 *1
\n3G8F7-CLK13-E
\n3G8F7-CLK12-EV1 *1
\nCS1W-RPT02
\nSYSMAC LINK:
\nCS1W-SLK11
\n3G8F7-SLK11-E
\nC200HW-SLK13\/14 *1<\/td>\n		Half lock<\/td>\nS3200-COCF2571<\/strong><\/td>\n<\/tr>\n
\"1681_lu_6_3\"<\/td>\nController Link:
\nCS1W-CLK13
\nCS1W-CLK12-V1 *1
\n3G8F7-CLK13-E
\n3G8F7-CLK12-EV1 *1
\nCS1W-RPT02
\nSYSMAC LINK:
\n3G8F7-SLK11-E<\/td>\n		Full lock<\/td>\nS3200-COCF2071
\n*2<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Discontinuation models.
\n*2. Full-lock Optical Connectors (Crimp-cut) (S3200-COCF2071) cannot be used with the CS1W-SLK11. Use a Half-lock
\nCable (S3200- COCF2571) or a H-PCF Optical Fiber Cable with Connector (S3200-CN[][][]-[][]-[][]).<\/div>\n<\/div>\n<\/div>\n

H-PCF Optical Fiber Cables with Connectors (Black Composite Cables with Two-Optical Lines and Two Power Supply Lines)<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Application<\/strong><\/th>\nAppearance<\/strong><\/td>\nModel<\/strong><\/th>\nStandards<\/strong><\/td>\n<\/tr>\n
Controller Link,
\nSYSMAC LINK<\/strong><\/th>\n		\n
\"1681_lu_7_1\"<\/div>\n<\/td>\n
S3200-CN[][][]-20-20<\/strong><\/td>\n–<\/td>\n<\/tr>\n
\n
\"1681_lu_7_2\"<\/div>\n<\/td>\n
S3200-CN[][][]-20-25<\/strong><\/td>\n<\/tr>\n
\n
\"1681_lu_7_3\"<\/div>\n<\/td>\n
S3200-CN[][][]-25-25<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Optical connectors for H-PCF Optical Cables with Connectors are adhesive polished.<\/p>\n<\/div>\n<\/div>\n

Cable Length<\/h4>\n
\n
\n

The following cable lengths are available: 2 m, 5 m, 15 m, and 20 m. For lengths of 21 m or more, contact your OMRON sales representative.<\/p>\n<\/div>\n<\/div>\n

Model Numbers<\/h4>\n
\n
\"CS1W-CLK<\/div>\n<\/div>\n

Optical Connector Assembly Tool<\/h4>\n
\n
\n
\n\n\n\n\n
Name<\/strong><\/th>\nApplicable Unit<\/strong><\/td>\nModel<\/strong><\/th>\nManufacturer<\/strong><\/td>\nStandards<\/strong><\/th>\n<\/tr>\n
Optical Fiber
\nAssembly Tool *<\/strong><\/th>\n		This tool is used on site for mounting crimp-cut connectors
\nand hard plastic-clad silica optical fiber for optical transmission
\nsystems of SYSMAC C-series SYSBUS, SYSMAC LINK, and
\nController Link.<\/td>\n		CAK-0057<\/strong><\/td>\nSumitomo Electric
\nIndustries, Ltd.<\/td>\n		–<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
* There is a risk of quality problems when using cables assembled by typical users, so we recommend purchasing
\ncables with preattached connectors or having a qualified technician assemble the cables.<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n

Communications Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Items<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
Model<\/strong><\/th>\nCS1W-CLK23
\n3G8F7-CLK23-E
\nCS1W-CLK21-V1 *1
\n3G8F7-CLK21-EV1 *1<\/td>\n		CS1W-CLK13
\n3G8F7-CLK13-E
\nCS1W-CLK12-V1 *1
\n3G8F7-CLK12-EV1 *1<\/td>\n		CS1W-CLK53
\n3G8F7-CLK53-E
\nCS1W-CLK52-V1 *1
\n3G8F7-CLK52-EV1 *1<\/td>\n<\/tr>\n
Type<\/strong><\/th>\nWired (shielded twisted-pair cable)<\/td>\nOptical Ring (H-PCF cable)<\/td>\nOptical Ring (GI cable)<\/td>\n<\/tr>\n
Communications method<\/strong><\/th>\nN:N token-bus method<\/td>\nN:N token-ring method (token-ring mode)
\nN:N token-bus method (token-bus mode)<\/td>\n<\/tr>\n
Code<\/strong><\/th>\nManchester code<\/td>\n<\/tr>\n
Modulation<\/strong><\/th>\nBaseband code<\/td>\n<\/tr>\n
Synchronization<\/strong><\/th>\nFlag synchronization (conforms to HDLC frames)<\/td>\n<\/tr>\n
Transmission path format<\/strong><\/th>\nMultidrop method (bus type)<\/td>\nRing method (token-ring mode)
\nDaisy-chain method (token-ring mode)<\/td>\n<\/tr>\n
Transmission speed<\/strong><\/th>\nThe following are the maximum
\ntransmission distances depending on
\nthe transmission speed.
\n2 Mbits\/s: 500 m
\n1 Mbits\/s: 800 m
\n500 kbits\/s: 1 km<\/td>\n		2 Mbits\/s<\/td>\n<\/tr>\n
Maximum transmission
\ndistance<\/strong><\/th>\n		20 km<\/td>\n30 km<\/td>\n<\/tr>\n
Maximum distance between
\nnodes<\/strong><\/th>\n		Not specified. (Maximum transmission
\ndistance must be satisfied for the
\nentire system.)<\/td>\n		Crimp-cut: 800 m
\nAdhesive polishing: 1 km *2<\/td>\n		62.5\/125 \u03bcm: 2 km
\n50\/125 \u03bcm: 1 km<\/td>\n<\/tr>\n
Medium<\/strong><\/th>\nSpecified shielded twist-pair cable
\nTwo signal wires, one shield<\/td>\n		H-PCF cable
\n(two-core optical cable)<\/td>\n		GI cable (two-core optical
\ncable: 62.5\/125 \u03bcm, 50\/
\n125 \u03bcm)<\/td>\n<\/tr>\n
Node connection method<\/strong><\/th>\nPLC: Connection to terminal block
\nComputer: Connection using special
\n(supplied) connector<\/td>\n		Connection using special
\nconnector (full-lock connector
\nor half-lock connector)<\/td>\n		Connection using ST
\nconnector<\/td>\n<\/tr>\n
Maximum number of nodes<\/strong><\/th>\n32 or 62 nodes *3 *4<\/td>\n62 *5<\/td>\n<\/tr>\n
Applicable Programming
\nDevices<\/strong><\/th>\n		CX-Integrator in CX-One, CX-Net in CX-Programmer *4, and Programming Console<\/td>\n<\/tr>\n
Communications functions<\/strong><\/th>\nData links and message service<\/td>\n<\/tr>\n
Number of data link words<\/strong><\/th>\nSend words per node: 4,000 words max. (CS1W-CLK[]3), 1,000 words max. (All other Units)
\nNumber of send\/receive words per node:
\n12,000 words max. (Pre-Ver. 1.2)
\n20,000 words max. (unit Ver. 1.2 or later)
\nTotal number of send words per network: 62,000 words max.<\/td>\n<\/tr>\n
Data link areas<\/strong><\/th>\nPLC: Bit areas (CIO Area, Work Area, Link Area *6), Data Memory (DM), Extended DM Area (EM)
\nComputer: FinsGateway event memory<\/td>\n<\/tr>\n
Message length<\/strong><\/th>\n2,012 bytes max. (including the header)<\/td>\n<\/tr>\n
RAS functions<\/strong><\/th>\nPolling node backup function
\nSelf-diagnosis function (hardware
\nchecking at startup)
\nEchoback test and broadcast test
\n(using the FINS command)
\nWatchdog timer
\nError log function<\/td>\n		Polling node backup function
\nSelf-diagnosis function (hardware checking at startup)
\nEchoback test and broadcast test (using the FINS command)
\nWatchdog timer
\nError log function
\nNode bypass function
\nTransmission path duplication (for ring method in token-ring
\nmode only)
\nDisconnect detection and notification (token-ring mode only)
\nNode connection configuration data reading (for ring method
\nin token-ring mode only)
\nDuplex operation of Communications Units *7<\/td>\n<\/tr>\n
Error control<\/strong><\/th>\nManchester code check
\nCRC check (CCITT X16<\/sup>+X12<\/sup>+X5<\/sup>+1)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Discontinuation models in July 2012.
\n*2. The maximum distance between nodes depends on the processing method for connectors and cables.
\n*3. With wired models, the maximum number of nodes is 32 if Repeater Units are not used. A Repeater Unit is required
\nwhen building a network with more than 32 nodes. If a Repeater Unit is used, be sure to use only the following
\nController Link Units or Boards and set the Wired Network 62 Node Enable Bit in the DM Parameter Area software
\nswitches at all nodes.
\nCS1W-CLK23\/CLK21-V1 *1
\nCJ1W-CLK23\/CLK21-V1 *1
\n3G8F7-CLK23-E\/CLK21-EV1 *1
\n*4. CX-Net in CX-Programmer version 3.1 or earlier can be used only in a system with a maximum of 32 nodes (node
\naddress 1 to 32). If a system is to be used with a maximum of 62 nodes (node addresses 1 to 62), use CX-Net in
\nCX-Programmer version 3.2 or higher or the CX-Integrator.
\n*5. If duplex Controller Link Units are used, the effective maximum number of nodes will be 62 (i.e., the maximum
\nnumber of nodes in standby mode (STB)).
\n*6. CS-series PLCs do not have a Link Area, but LR000 to LR199 are automatically converted CIO 1000 to CIO 1199.
\n*7. Only when a CS1W-CLK13\/12-V1 *1\/53\/52-V1 *1 installed in a CS1D system is used in token ring mode.<\/div>\n<\/div>\n<\/div>\n

Individual Specifications<\/h4>\n

Controller Link Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
Model<\/strong><\/th>\nCS1W-CLK23
\nCS1W-CLK21-V1 *<\/td>\n		CS1W-CLK13
\nCS1W-CLK12-V1 *<\/td>\n		CS1W-CLK53
\nCS1W-CLK52-V1 *<\/td>\n<\/tr>\n
Supported PLC<\/strong><\/th>\nAll CS-series CPU Units<\/td>\n<\/tr>\n
Number of mountable Units<\/strong><\/th>\nUnit version 1.2 or later: 8 Units max., Pre-Ver. 1.2: 4 Units max.<\/td>\n<\/tr>\n
Installation site<\/strong><\/th>\nInstall onto a CPU Backplane or CS-series Expansion Backplane (classified as a CPU Bus Unit).<\/td>\n<\/tr>\n
Storage location for network parameters
\nand manually set data tables<\/strong><\/th>\n		CPU Bus Unit Area (in the CPU Unit parameter area)<\/td>\n<\/tr>\n
Storage location for routing tables<\/strong><\/th>\nCPU Unit parameter area<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n220 g<\/td>\n300 g
\n(excluding mounting bracket)<\/td>\n		300 g
\n(excluding mounting bracket)<\/td>\n<\/tr>\n
Current
\nconsumption<\/strong><\/th>\n		5 V in PLC<\/strong><\/td>\n0.33 A<\/td>\n0.52 A<\/td>\n0.65 A<\/td>\n<\/tr>\n
26 V in PLC<\/strong><\/th>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
External 24 V<\/strong><\/th>\n–<\/td>\n0.20 A<\/td>\n0.26 A<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Discontinuation models in July 2012.<\/p>\n<\/div>\n<\/div>\n

Controller Link Support Boards (for PCI Bus)<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
Models<\/strong><\/th>\n3G8F7-CLK23-E<\/td>\n3G8F7-CLK13-E<\/td>\n3G8F7-CLK53-E<\/td>\n<\/tr>\n
Applicable computers<\/strong><\/th>\nIBM PC\/AT or compatible
\nCPU: Intel Celeron 400 MHz or better
\nMain memory: 128 MB minimum
\nOne or more PCI bus slots (PCI bus revision 2.0 or higher, power supply: 5 V)
\nAvailable hard disk space: 70 MB min.
\nCD-ROM drive: One required for installation
\nDisplay: VGA (640 \u00d7 480 (pixels) min.)
\n(Other conditions conform to the OS.)<\/td>\n<\/tr>\n
Compatible OS<\/strong><\/th>\nFinsGateway Version 2003 *1
\nWindows 10 (32bit)
\nWindows 8 (32bit)
\nWindows 7 (32bit) Professional
\nWindows 7 (32bit) Home Premium
\nWindows Vista Business
\nWindows Vista Home Premium
\nFinsGateway Version 3 *2
\nWindows XP Professional
\nWindows XP Home Edition
\nWindows 2000 Professional
\nWindows NT 4.0 (Service Pack 3 or higher)
\nWindows ME
\nWindows 98SE<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n104 g<\/td>\n120 g (excluding
\nmounting bracket)<\/td>\n		124 g (excluding
\nmounting bracket)<\/td>\n<\/tr>\n
Current
\nconsumption<\/strong><\/th>\n		5 V in PLC<\/strong><\/th>\n0.35 A<\/td>\n0.54 A<\/td>\n0.60 A<\/td>\n<\/tr>\n
External 24 V<\/strong><\/th>\n–<\/td>\n0.35 A<\/td>\n0.35 A<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Install the software from CD Ver. 3.12 or higher if the operating system is Windows 10 or 8 (32bit).
\n*2. Install FinsGateway version 3 if the operating system is Windows NT 4.0 (Service pack 3 or higher), Windows ME, or
\nWindows 98SE. In that case, however, the new functions of Controller Link Support Boards for the PCI Bus cannot
\nbe used (i.e., automatic data link creation with 1:N allocation, changing data link tables with active data links, 62-
\nnode setting for wired models, and maximum of 4000 send words).<\/div>\n<\/div>\n<\/div>\n

Repeater Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nCS1W-RPT01<\/td>\nCS1W-RPT02<\/td>\nCS1W-RPT03<\/td>\n<\/tr>\n
Supported Units and Boards<\/strong><\/th>\nAll wired Controller Link Units and Boards
\nNote: If a maximum of 62 nodes is used, models that support 62 nodes must be used.<\/td>\n<\/tr>\n
Transmission path<\/strong><\/th>\nWire-to-wire<\/td>\nWire-to-optical (H-PCF)<\/td>\nWire-to-optical (GI)<\/td>\n<\/tr>\n
Transmission path format<\/strong><\/th>\nMulti-drop
\nTree<\/td>\n		1:1<\/td>\n1:1<\/td>\n<\/tr>\n
Installation<\/strong><\/th>\nRepeater Units are not mounted to the PLC.
\nThey are mounted separately with screws or on a DIN Track.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n130 g<\/td>\n130 g
\n(excluding mounting bracket)<\/td>\n		130 g
\n(excluding mounting bracket)<\/td>\n<\/tr>\n
Allowable power supply
\nvoltage range<\/strong><\/th>\n		20.4 to 26.4 VDC (24 VDC – 15 V to +10%)<\/td>\n<\/tr>\n
Current consumption<\/strong><\/th>\n0.06 A at 24 VDC<\/td>\n0.06 A at 24 VDC<\/td>\n0.07 A at 24 VDC<\/td>\n<\/tr>\n
Inrush current<\/strong><\/th>\n2.5 A max. (24 VDC with rise time of 5 ms)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Repeater Units are used to expand the Controller Link network for wired models. For Wired-to-optical Repeater Units, always use a set of two (1:1). Optical Ring Controller Link Units and Boards cannot be connected to the optical cable section between Repeater Units.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

CS1W-CLK23\/CS1W-CLK21-V1 *<\/h4>\n
\n
\"CS1W-CLK<\/div>\n<\/div>\n

CS1W-CLK13\/CS1W-CLK12-V1 *<\/h4>\n
\n
\"CS1W-CLK<\/div>\n<\/div>\n

CS1W-CLK53\/CS1W-CLK52-V1 *<\/h4>\n
\n
\"CS1W-CLK<\/div>\n<\/div>\n
\n
\n

Note: The dimensions in parentheses are for the CS1W-CLK53 (including the terminal cover).
\n* Discontinuation models in July 2012.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

 <\/p>\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0CS1W-CLK Data Sheet<\/a><\/td>\n–
\n[1352KB]<\/span><\/td>\n		Dec 17, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

New Controller Link Units, Now with 4,000 Send Words<\/h2>\n","protected":false},"featured_media":1481,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[92,63,72],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1489"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1489"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1481"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1489"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1489"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1489"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}