{"id":1476,"date":"2019-01-03T00:32:44","date_gmt":"2019-01-03T00:32:44","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1476"},"modified":"2019-01-03T00:32:50","modified_gmt":"2019-01-03T00:32:50","slug":"cs1w-eip21","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/cs1w-eip21\/","title":{"rendered":"CS1W-EIP21"},"content":{"rendered":"

Global Standard<\/h4>\n

Highly Open Global Standard for FA Industry with High Future Potential<\/h4>\n
\n
\n

The ODVA promotes the spread of Industrial Ethernet all over the world.<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

EtherNet\/IP can be used to communicate with many devices from various companies around the world in addition to OMRON components (such as Temperature Controllers and Sensors). The use of EtherNet\/IP will rapidly increase the development of an EtherNet\/IP multivendor environment (including robots and safety devices).<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n

Integrated Information and Control Network<\/h4>\n
\n
\n

Seamless communications on the control line and information monitoring line with EtherNet\/IP<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

Using the global standard open protocol (CIP), an independent network system can be created with seamless data flow between the control line and the information monitoring line.
\nOMRON FINS message communications can also be used on the same network because it is a standard LAN.<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n

Improved operation efficiency with common Support Software operation<\/h4>\n
\n
\n

Use the same operating procedures for both EtherNet\/IP and DeviceNet Support Software.<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

The same Support Software procedures can be used from a remote location for device configuration, monitoring, and program transfer for the DeviceNet and EtherNet\/IP networks.<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n

Monitor Safety Systems<\/h4>\n
\n
\n

Safety systems can be monitored through the EtherNet\/IP.<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

The safety system can be monitored from a PLC by using a modular designed Safety Control Unit with a EtherNet\/IP Coupler Unit.<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n

Convenience of the Universal Ethernet Right in Your Hands<\/h4>\n

Higher Data Link Capacity (9 times the capacity of previous OMRON models)<\/h4>\n
\n
\n

High-capacity communications with high-speed high-capacity bus<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

All types of data, from process interlocks and manufacturing recipes to production data, can be exchanged at high speed and with optimal timing. The ability to communicate is incomparably better than previous networks, such as the Controller Link and FL-net.<\/p>\n<\/div>\n<\/div>\n

\n
\"CS1W-EIP21<\/div>\n
\n

Note: Using a built-in EtherNet\/IP port on CJ2H and EtherNet\/IP Units.<\/p>\n<\/div>\n<\/div>\n

Low Cost Expansion for Each Line<\/h4>\n
\n
\n

Flexible topology with the Ethernet switch<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

Flexible wiring and expansion are possible with Ethernet switches. This means that there will be no total network crashes caused by communications path errors, ensuring high network performance and security.<\/p>\n

– Joining and leaving the network is possible during communications.<\/p>\n

Nodes can leave the network during operation, enabling easy maintenance for error detection, separation, and restoration.<\/p>\n

– Unpredictable delays caused by data collisions are minimum.
\n– Problems caused by wiring errors are minimized to each line.<\/p>\n<\/div>\n<\/div>\n

\n
\"CS1W-EIP21<\/div>\n
\n

Star topology using Ethernet switch technology<\/p>\n<\/div>\n<\/div>\n

Reduced Network Facility and Wiring Costs<\/h4>\n
\n
\n

Generic LAN cables can be used.<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

– Metal cables of category 5, 5e, or higher can be used as LAN cables.
\n– Generic RJ-45 connectors can be used.<\/p>\n<\/div>\n<\/div>\n

Standard wireless LAN can be used because EtherNet\/IP is also Universal Ethernet.<\/h4>\n
\n
\n

There is no need to rewire even when layout has been changed.<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

– EtherNet\/IP can be made wireless using the standard wireless LAN.
\n– High-speed Smart Roaming communications can be used for mobile units with the WE70 FA Wireless LAN. The communications range can be expanded by relaying communications between access points.<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n

Integration of Control and Information Networks<\/h4>\n

High-speed Data Links with Optimal Cycles for Applications (30 times higher than previous OMRON models)<\/h4>\n
\n
\n

Flexible and high-speed cyclic communications<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n
– Grouping can be used in data link tables to create multiple sections.<\/p>\n

Data link table can be divided into up to 256 groups (= connections).
\nThe optimum communications cycle for the application can be set for each group.<\/p>\n

– Cyclic synchronization can be set for each group.<\/p>\n

The communications cycle can be set to between 0.5 ms and 10 s in 0.5-ms increments. Data concurrency is maintained for each connection. The communications cycle does not change even if the number of nodes increases. The communications performance is 30 times better than that of the Controller Link.
\nExample:
\nData link refresh cycle for 25 linked Unit and 20,000 words\/network is reduced from 300 ms to 10 ms.<\/p>\n

– Facilities can be easily expanded.<\/p>\n

When expanding facilities, all you need to do is make additions to the tables. Expansion is possible with little time and low cost.
\nNote: Using a built-in EtherNet\/IP port on CJ2H and EtherNet\/IP Units.<\/p><\/div>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n

FTP, Data Links, and Support Software Can Be Used Simultaneously with One Port<\/h4>\n
\n
\n

With the multipurpose EtherNet\/IP port, an Ethernet Unit is not required for expansion.<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

Using the multipurpose EtherNet\/IP port built into a CJ\/NJ\/NX\/NY CPU Unit, a single port can be used for data link communications between PLCs, messages between PLCs, and Universal Ethernet communications, such as FTP transfers while connecting Support Software. An EtherNet\/IP Unit can be added to any CS\/CJ-series PLC to achieve the same functions.<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n
\n
\"CS1W-EIP21<\/div>\n<\/div>\n

Memory Map Management Becomes Unnecessary.<\/h4>\n
\n
\n

Freed from memory map by tags<\/strong><\/p>\n<\/div>\n<\/div>\n

\n
\n

The transmission\/reception area can be specified with normal names called tag names instead of addresses for communication on data links between devices or when communication with the host application.
\nThe efficiency of design, startup, maintenance, and upgrading are improved.<\/p>\n

– PT and host applications can be developed in parallel.<\/p>\n

Network symbols defined in CJ\/NJ\/NX\/NY CPU Units can be used as tags when designing the PT screen.
\nDesign is easy: Just decide on the tag names for the information and control departments.
\nChanges to allocated addresses is not needed later in development.<\/p>\n

– Easier facility upgrading and maintenance<\/p>\n

Even if physical addresses change in the PLC, there is no need to make any changes in the data link settings, in the PT, or in the host application.<\/p>\n<\/div>\n

\"CS1W-EIP21<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n

International Standards<\/h4>\n
\n
\n
    \n
  • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.<\/li>\n
  • Contact your OMRON representative for further details and applicable conditions for these standards.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n

    EtherNet\/IP Unit<\/h4>\n
    \n
    \n
    \n\n\n\n\n\n
    Unit
    \ntype<\/strong><\/th>\n    		Product
    \nname<\/strong><\/th>\n    		Specifications<\/strong><\/th>\nNo. of
    \nunit
    \nnumbers
    \nallocated<\/strong><\/th>\n    		Current
    \nconsump-
    \ntion (A)<\/strong><\/th>\n    		Model<\/strong><\/th>\nStand-
    \nards<\/strong><\/th>\n<\/tr>\n
    Communi-
    \ncations
    \ncable<\/strong><\/th>\n    		Communi-
    \ncations
    \nfunctions<\/strong><\/th>\n    		Units
    \nper
    \nCPU
    \nUnit<\/strong><\/th>\n    		5 V
    \nsys-
    \ntem<\/strong><\/th>\n    		24 V
    \nsys-
    \ntem<\/strong><\/th>\n<\/tr>\n
    CS1
    \nCPU
    \nBus
    \nUnit<\/strong><\/th>\n    		EtherNet\/IP
    \nUnit<\/strong><\/p>\n
    \"1994_lu_1_1\"<\/strong><\/div>\n<\/th>\n
    		Shielded twisted-
    \npair (STP) cable
    \nCategories:
    \n100 \u03a9 at 5, 5e<\/td>\n    		Tag Data Link
    \nFunctions,
    \nMessage
    \nCommunications
    \nFunctions<\/td>\n    		8
    \nmax.<\/td>\n    		1<\/td>\n0.41<\/td>\n—<\/td>\nCS1W-EIP21<\/strong><\/td>\nUC1,
    \nN, L,
    \nCE<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

    Industrial Switching Hubs<\/h4>\n
    \n
    \n
    \n\n\n\n\n\n\n\n
    Product
    \nname<\/strong><\/th>\n    		Appearance<\/strong><\/th>\nSpecifications<\/strong><\/th>\nAccessories<\/strong><\/th>\nCurrent
    \nconsump-
    \ntion (A)<\/strong><\/th>\n    		Model<\/strong><\/th>\nStand-
    \nards<\/strong><\/th>\n<\/tr>\n
    Functions<\/strong><\/th>\nNo.
    \nof
    \npors<\/strong><\/th>\n    		Failure
    \ndetec-
    \ntion<\/strong><\/th>\n<\/tr>\n
    Industrial
    \nSwitching
    \nHubs<\/strong><\/th>\n    		\"1994_lu_2_1\"<\/td>\nQuality of Service
    \n(QoS): EtherNet\/IP
    \ncontrol data priority
    \nFailure detection:
    \nBroadcast storm and
    \nLSI error detection
    \n10\/100BASE-TX,
    \nAuto-Negotiation<\/td>\n    		3<\/td>\nNo<\/td>\nPower supply
    \nconnector<\/td>\n    		0.22<\/td>\nW4S1-03B<\/strong><\/td>\nUC, CE<\/td>\n<\/tr>\n
    \"1994_lu_2_2\"<\/td>\n5<\/td>\nNo<\/td>\n0.22<\/td>\nW4S1-05B<\/strong><\/td>\n<\/tr>\n
    5<\/td>\nYes<\/td>\nPower supply
    \nconnector
    \nConnector
    \nfor informing
    \nerror<\/td>\n    		0.22<\/td>\nW4S1-05C<\/strong><\/td>\nCE<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

     <\/p>\n

    EtherNet\/IP Unit Specifications<\/h4>\n
    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Item<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
    Model number<\/strong><\/th>\nCS1W-EIP21<\/td>\n<\/tr>\n
    Type<\/strong><\/th>\n100Base-TX (See note.)<\/td>\n<\/tr>\n
    Applicable PLCs<\/strong><\/th>\nCS-series PLCs<\/td>\n<\/tr>\n
    Unit classification<\/strong><\/th>\nCS-series CPU Bus Unit<\/td>\n<\/tr>\n
    Mounting location<\/strong><\/th>\nCPU Rack or Expansion Rack<\/td>\n<\/tr>\n
    Number of Units that can be mounted<\/strong><\/th>\n8 max. (including Expansion Racks)<\/td>\n<\/tr>\n
    CPU Unit
    \nwords used<\/strong><\/th>\n    		Allocated CIO Area
    \nwords (CPU Bus Unit
    \nwords)<\/strong><\/td>\n    		25 words\/Unit (one unit number’s words)<\/td>\n<\/tr>\n
    These words contain control bits and flags, the target node PLC’s operating and error
    \ninformation, Unit status, communications status, registered\/normal target node information,
    \nand FINS\/TCP connection status.<\/td>\n<\/tr>\n
    Allocated DM Area
    \nwords (CPU Bus Unit
    \nwords)<\/strong><\/th>\n    		100 words\/Unit (one unit number’s words)<\/td>\n<\/tr>\n
    These words contain the IP address display\/setting area<\/td>\n<\/tr>\n
    User-set area<\/strong><\/th>\nAny usable data area words<\/td>\n<\/tr>\n
    Target node PLC’s operating and error information, and registered\/normal target node
    \ninformation<\/td>\n<\/tr>\n
    CPU Bus Unit System
    \nSetup<\/strong><\/th>\n    		Not used.<\/td>\n<\/tr>\n
    Non-volatile memory within
    \nEtherNet\/IP Unit (See note.)<\/strong><\/th>\n    		The following settings are stored in the EtherNet\/IP Unit’s non-volatile memory.
    \nNote: Unlike the regular Ethernet Units, the CPU Bus Unit Setup Area in the CPU Unit is not
    \nused for these settings.
    \n1. Unit setup (communications settings for the EtherNet\/IP Unit, such as the IP address, DNS
    \nserver settings, host name, baud rate, FINS\/UDP settings, and FINS\/TCP settings)
    \n2. Tag data link settings (device parameters)<\/td>\n<\/tr>\n
    Transfer
    \nspecifications<\/strong><\/th>\n    		Media access method<\/strong><\/td>\nCSMA\/CD<\/td>\n<\/tr>\n
    Modulation method<\/strong><\/th>\nBaseband<\/td>\n<\/tr>\n
    Transmission paths<\/strong><\/th>\nStar form<\/td>\n<\/tr>\n
    Baud rate<\/strong><\/th>\n100 Mbit\/s (100Base-TX)<\/td>\n<\/tr>\n
    Transmission media<\/strong><\/th>\nShielded twisted-pair (STP) cable
    \nCategories: 100 \u03a9 at 5, 5e<\/td>\n<\/tr>\n
    Transmission distance<\/strong><\/th>\n100 m (distance between hub and node)<\/td>\n<\/tr>\n
    Number of cascade
    \nconnections<\/strong><\/th>\n    		There is no limitation when a switching hub is used.<\/td>\n<\/tr>\n
    Current consumption (Unit)<\/strong><\/th>\n410 mA max. at 5 V DC<\/td>\n<\/tr>\n
    Weight<\/strong><\/th>\n171 g max.<\/td>\n<\/tr>\n
    Dimensions<\/strong><\/th>\n35 \u00d7 130 \u00d7 101 mm (W \u00d7 H \u00d7 D)<\/td>\n<\/tr>\n
    Other general specifications<\/strong><\/th>\nOther specifications conform to the general specifications of the CS-series<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n

    Note: If tag data links are being used, use 100Base-TX. Otherwise, 10Base-T can be used, but this is not recommended.<\/p>\n<\/div>\n<\/div>\n

    Communications Specifications<\/h4>\n
    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Item<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
    CIP
    \nservice<\/strong><\/th>\n    		Tag data
    \nlinks
    \n(Cyclic
    \ncommuni-
    \ncations)<\/strong><\/th>\n    		Number of connections<\/strong><\/th>\n256<\/td>\n<\/tr>\n
    Packet interval
    \n(refresh cycle)<\/strong><\/th>\n    		0.5 to 10,000 ms (in 0.5-ms units)
    \nCan be set independently for each connection.
    \n(Data is refreshed over the network at the preset interval and
    \ndoes not depend on the number of nodes.)<\/td>\n<\/tr>\n
    Maximum allowed
    \ncommunications
    \nbandwidth per Unit<\/strong><\/th>\n    		6,000 to 12,000 pps *1 *2<\/td>\n<\/tr>\n
    Number of tag sets<\/strong><\/th>\n256<\/td>\n<\/tr>\n
    Tag types<\/strong><\/th>\nCIO Area, DM Area, EM Area, Holding Area, and Work Area<\/td>\n<\/tr>\n
    Number of tags per
    \nconnection (= 1 tag set)<\/strong><\/th>\n    		8 (7 tags when the tag set contains the PLC status)<\/td>\n<\/tr>\n
    Maximum link data size
    \nper node<\/strong><\/th>\n    		184,832 words<\/td>\n<\/tr>\n
    Maximum data size per
    \nconnection<\/strong><\/th>\n    		252 words or 722 words *3
    \nNote: Data synchronicity is maintained within each connection.<\/td>\n<\/tr>\n
    Number of registrable
    \ntag sets<\/strong><\/th>\n    		256
    \n(1 connection = 1 tag set)<\/td>\n<\/tr>\n
    Maximum size of 1 tag
    \nset<\/strong><\/th>\n    		722 words
    \n(The PLC status uses 1 word when the tag set contains the PLC
    \nstatus.)<\/td>\n<\/tr>\n
    Maximum number of
    \ntags that can be
    \nrefreshed per CPU Unit
    \ncycle *4<\/strong><\/th>\n    		Output\/Transmission (CPU to EtherNet\/IP): 19
    \nInput\/Reception (EtherNet\/IP to CPU): 20 *5<\/td>\n<\/tr>\n
    Data that can be
    \nrefreshed per CPU Unit
    \ncycle *4<\/strong><\/th>\n    		Output\/Transmission (CPU to EtherNet\/IP): 7,405 words
    \nInput\/Reception (EtherNet\/IP to CPU): 7,405 words<\/td>\n<\/tr>\n
    Changing tag data link
    \nparameters during
    \noperation<\/strong><\/th>\n    		Supported *6<\/td>\n<\/tr>\n
    Multicast packet filter
    \nfunction *7<\/strong><\/th>\n    		Supported<\/td>\n<\/tr>\n
    Explicit
    \nmessaging<\/strong><\/th>\n    		Class 3 (connected)<\/strong><\/th>\nNumber of connections: 128<\/td>\n<\/tr>\n
    UCMM (unconnected)<\/strong><\/th>\nNumber of clients that can communicate at one time: 32 max.
    \nNumber of servers that can communicate at one time: 32 max.<\/td>\n<\/tr>\n
    CIP routing<\/strong><\/th>\nCS1W-EIP21, CJ1W-EIP21, CJ2H-CPU6[]-EIP, CJ2M-CPU3[]<\/td>\n<\/tr>\n
    FINS service<\/strong><\/th>\nFINS\/UDP<\/strong><\/th>\nSupported<\/td>\n<\/tr>\n
    FINS\/TCP<\/strong><\/th>\n16 connections max.<\/td>\n<\/tr>\n
    EtherNet\/IP conformance test<\/strong><\/th>\nConforms to A5<\/td>\n<\/tr>\n
    Ethernet interface<\/strong><\/th>\n10BASE-T or 100BASE-TX
    \nAuto Negotiation or fixed settings<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n

    *1. In this case, pps means “packets per second” and indicates the number of packets that can be processed in one
    \nsecond.
    \n*2. To use 505 to 1,444 bytes as the data size, the system must support the Large Forward Open standard (an optional
    \nCIP specification). The CS\/CJ-series Units support this standard, but before connecting to nodes of other companies,
    \nconfirm that those devices also support it.
    \n*3. If the maximum data size is exceeded, the data refreshing with the CPU Unit will extend over two or more cycles.
    \n*4. If status layout is selected in the user settings, the maximum number of tags that can be received is 19 tags.
    \n*5. If parameters are changed in the EtherNet\/IP Unit, however, the EtherNet\/IP Unit will be restarted. When other nodes
    \nare communicating with the affected node, the communications will temporarily time out and automatically recover
    \nlater.
    \n*6. Because the EtherNet\/IP Unit is equipped with an IGMP client, unnecessary multicast packets can be filtered by using
    \na switching hub that supports IGMP snooping.
    \n*7. The EtherNet\/IP Unit uses the TCP\/UDP port numbers shown in the following table.<\/p>\n<\/div>\n<\/div>\n

    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n
    Service<\/strong><\/th>\nProtocol<\/strong><\/td>\nPort number<\/strong><\/th>\nRemarks<\/strong><\/td>\n<\/tr>\n
    Tag data links<\/td>\nUDP<\/td>\n2222<\/td>\nFixed value<\/td>\n<\/tr>\n
    Class 3, UCMM<\/td>\nTCP\/UDP<\/td>\n44818<\/td>\n<\/tr>\n
    DNS<\/td>\nUDP<\/td>\n53<\/td>\n<\/tr>\n
    FINS\/UDP service<\/td>\nUDP<\/td>\n9600<\/td>\nPort numbers in the Unit Setup can be changed with
    \nthe CX-Programmer.<\/td>\n<\/tr>\n
    FINS\/TCP service<\/td>\nTCP<\/td>\n9600<\/td>\n<\/tr>\n
    FTP<\/td>\nTCP<\/td>\n20, 21<\/td>\n<\/tr>\n
    SNTP<\/td>\nUDP<\/td>\n123<\/td>\n<\/tr>\n
    SNMP<\/td>\nUDP<\/td>\n161<\/td>\n<\/tr>\n
    SNMP trap<\/td>\nUDP<\/td>\n162<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

    Network Configurator Requirements<\/h4>\n
    \n
    \n

    The Network Configurator Ver. 3.0 or higher is a software package designed for building, setting, and controlling a multi-vendor EtherNet\/IP Network using OMRON’s EtherNet\/IP. It is included in CX-One. The Network Configurator provides the following functions for building, setting, and controlling EtherNet\/IP.<\/p>\n<\/div>\n<\/div>\n

    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n
    Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
    Operating environment<\/strong><\/th>\nCXONE-AL[][]D-V[]<\/td>\n<\/tr>\n
    Network
    \nconnection
    \nmethod<\/strong><\/th>\n    		<\/th>\nCS1\/CJ1<\/strong><\/th>\nCJ2<\/strong><\/th>\n<\/tr>\n
    Serial interface<\/strong><\/th>\nCPU Unit’s Peripheral or RS-232C port<\/td>\nCPU Unit’s USB or RS-232C port<\/td>\n<\/tr>\n
    Ethernet interface<\/strong><\/th>\nEtherNet\/IP Unit’s Ethernet port<\/td>\nCPU Unit’s Ethernet port
    \nEtherNet\/IP Unit’s Ethernet port<\/td>\n<\/tr>\n
    Location on Network<\/strong><\/th>\nA single node address is used (only when directly connected to EtherNet\/IP).<\/td>\n<\/tr>\n
    Number of Units that can be
    \nconnected to Network<\/strong><\/th>\n    		A single Network Configurator per Network
    \n(More than one Configurator cannot be used in the same system.)<\/td>\n<\/tr>\n
    Main
    \nfunctions<\/strong><\/th>\n    		Network control
    \nfunctions<\/strong><\/th>\n    		The Network configuration can be created and edited regardless of whether the
    \nNetwork Configurator is online or offline.
    \nThe Network configuration can be read from a file or the network.<\/td>\n<\/tr>\n
    Configuration
    \nfunctions<\/strong><\/th>\n    		The EDS files used by the Network Configurator can be installed and deleted.<\/td>\n<\/tr>\n
    Supported file formats<\/strong><\/th>\nConfigurator network configuration files (*.ncf)
    \nConfiguration files (*.ncf) created using the Network Configurator for EtherNet\/IP
    \n(version 2) can be imported by selecting External Data – Import from the File Menu.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

     <\/p>\n

    \n
    \n

    (Unit: mm)<\/p>\n<\/div>\n<\/div>\n

    CS1W-EIP21<\/h4>\n
    \n
    \"CS1W-EIP21<\/div>\n<\/div>\n
    <\/div>\n
    <\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n\n\n\n\n\n\n
    \n
    Catalog Name<\/div>\n<\/th>\n
    		\n
    Catalog Number
    \n[size]<\/div>\n<\/th>\n
    		\n
    Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
    \"\"\u00a0CS1W-EIP21 Data Sheet<\/a><\/td>\n–
    \n[652KB]<\/span><\/td>\n    		Apr 03, 2017<\/td>\n<\/tr>\n
    \"\"\u00a0EtherNet\/IP\u2122 Catalog<\/a><\/td>\nR150-E1-16
    \n[2968KB]<\/span><\/td>\n    		Sep 03, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    <\/h2>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

    Introducing the New EtherNet\/IP Unit. More Than 180,000 Words of Tag Data Link Capacity!<\/h2>\n","protected":false},"featured_media":1482,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[92,63],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1476"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1476"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1482"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1476"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1476"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1476"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}