{"id":1464,"date":"2019-01-02T18:26:26","date_gmt":"2019-01-02T18:26:26","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1464"},"modified":"2019-01-02T18:26:26","modified_gmt":"2019-01-02T18:26:26","slug":"nsj-series","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/nsj-series\/","title":{"rendered":"NSJ Series"},"content":{"rendered":"

A Wide Selection of Scalable Display Controllers<\/h4>\n

(Product Line-up) Select the optimal control and display combination.<\/h4>\n
\n
\n

Four screen sizes are available, from 5.7 to 12.1 inches.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

(NSJ Built-in Ethernet Port) Easy access to both Display Section and Controller Section<\/h4>\n
\n
\n

This allows PLC data to be read or written without adding an Ethernet Unit. PLC data can also be read or written, and alarms and recipes can be transferred, from a host computer.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

Easy Access from a Host Computer<\/h4>\n
\n
\n

\u2022 Screen data and ladder programs can be easily transferred via Ethernet.
\n\u2022 PLC data can also be read by a host application (using FINS communications).<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

Easy Access to Other PLCs<\/h4>\n
\n
\n

\u2022 PLC2 data can be easily displayed and\u00a0set from the NSJ (PLC1) display.<\/p>\n<\/div>\n<\/div>\n

\n
\"NSJ<\/div>\n
\n

Note: It is also easy to allocate data from another host device for reference.<\/p>\n<\/div>\n<\/div>\n

(Expansion Units) Support a wider range of applications.<\/h4>\n

Controller Link Unit (NSJW-CLK21-V1)
\nHigh-speed, large-capacity data link<\/h4>\n
\n
\n

The PLC data link function can be used to provide a high-speed, large-capacity data link between Controllers.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

I\/O Control Unit (NSJW-IC101)
\nEasy addition of Special I\/O Units and CPU Bus Units<\/h4>\n
\n
\n

Used to mount Motion Control Units and other Special I\/O Units or CPU Bus Units to the NSJ-series Controller, for excellent expandability.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

Ethernet Unit (NSJW-ETN21)
\nFull use of versatile Ethernet functions<\/h4>\n
\n
\n

The NSJ built-in Ethernet port increases expandability with host computers by enabling functions such as communications implemented with CMND instructions and e-mail.<\/p>\n<\/div>\n<\/div>\n

\n
\"NSJ<\/div>\n
\n

Note: For detailed information on functions related to the NSJ built-in Ethernet port and Ethernet Unit, refer to Catalog.<\/p>\n<\/div>\n<\/div>\n

Meeting the Growing Needs for Control Panel Standardization<\/h4>\n
\n
\"NSJ<\/div>\n<\/div>\n

Effects of Standardizing Control Panels<\/h4>\n
\n
\n

Waste and inconsistency in design, installation and maintenance can be eliminated by supplying control panels that have the same basic operation regardless of the factory, the process, and the devices used in any country of the world.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\u00a01. Operating errors can be prevented by providing the same operability.
\nReduce temporary lower operating efficiency caused by changing operators.<\/div>\n<\/div>\n<\/div>\n
\n
\n
\u00a02. There is no need to produce an operating manual for each device.
\nInitial training cost can also be reduced.<\/div>\n<\/div>\n<\/div>\n
\n
\n
\u00a03. Standardization greatly reduces the number of maintenance parts.
\nEven if a malfunction occurs, the entire control panel can be replaced as a module for quick and easy system
\nrestoration.<\/div>\n<\/div>\n<\/div>\n
\n
\n
\u00a04. Standardization makes it possible to create templates for design documents, screens, and ladder programs. This
\nincreases the ability to reuse the templates, which greatly raises design efficiency.<\/div>\n<\/div>\n<\/div>\n

Less Effort in Designing and Debugging<\/h4>\n

Advantages of One Package<\/h4>\n

Use of a single USB cable simplifies both design and debugging.<\/h4>\n
\n
\n

Use of a commercially available USB cable allows easy, high-speed transferring of screen data and ladder programs. There is also no need to change cables for transfers such as these.<\/p>\n<\/div>\n<\/div>\n

\n
\"NSJ<\/div>\n
\n
(1) Power ON<\/div>\n
(2) Simply connect the USB cable and you are ready to transfer screen data and ladder programs.<\/div>\n<\/div>\n<\/div>\n

Continue using your software assets.<\/h4>\n
\n
\n

Continue to use all the screen data for NS-series PTs and ladder programs for CS\/CJ-series PLCs.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

Simply turn ON the power and start using it. No need for initial settings.<\/h4>\n
\n
\n
There is no need to connect the\u00a0Controller Section and Display\u00a0Section, and no need to make initial\u00a0communications settings or other\u00a0settings.<\/div>\n
The system starts up as soon as the\u00a0power is turned ON. Even the\u00a0standard-equipped DeviceNet Master\u00a0is completely set in the default\u00a0settings.<\/div>\n<\/div>\n
\"NSJ<\/div>\n<\/div>\n

The CX-One Integrated FA Tool Package Is Available<\/h4>\n

This software can be used to debug ladder programs and screens without even having to connect to an actual system.<\/h4>\n
\n
\n

The test functions of the CX-Designer Screen Designer for NS Series have been further strengthened. By selecting CX-Simulator as the connection destination, screen data and ladder programs can be simultaneously tested without even having to connect to an actual system.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

The SAP Library, which dramatically reduces effort in design, has also been greatly expanded.<\/h4>\n
\n
\n

More than 2,000 Smart Active Parts (SAP) are available for directly accessing OMRON PLCs and components. Simply copy them from the library and paste them onto the screen. There is absolutely no need to design screens or ladder programs for these objects.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

Less Effort in Maintenance<\/h4>\n

Two Troubleshooters Come as a Standard Feature<\/h4>\n

Enables a quick, on-site action without any software.<\/h4>\n
\n
\n

The standard-equipped PLC Troubleshooter and DeviceNet Troubleshooter contribute to solving problems during device startup and operation. When an error occurs, simply follow the on-screen instructions to confirm the error details and quickly implement countermeasures, without referring to the manual.<\/p>\n<\/div>\n<\/div>\n

A Ladder Program Monitor Is Also Standard<\/h4>\n

Switching from the operation screen to the screen for monitoring PLC ladder programs only takes about 5 seconds.<\/h4>\n
\n
\n

This software lets you monitor PLC program status, search for addresses or instructions, monitor multiple I\/O points, and much more. It only takes about 5 seconds to switch from a user screen to the ladder program monitoring screen. From a selected input bit, you can also search for the next sequence output instruction that uses the same address.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n

A Data Backup Function Is Also Standard<\/h4>\n

Easy backup without a computer.<\/h4>\n
\n
\n

Simply follow the on-screen instructions to back up both screen data and ladder programs for the Controller Section.<\/p>\n<\/div>\n

\"NSJ<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n

Controllers<\/h4>\n

NSJ[]-[][][][]-G5D<\/h4>\n
\n
\n
Controller Section<\/strong><\/div>\n
\u00a0I\/O: 1280 points<\/div>\n
\u00a0User program memory: 60 Ksteps<\/div>\n
\u00a0Data memory: 128 Kwords (DM: 32 Kwords)<\/div>\n
\u00a0Extended data memory: EM: 32 Kwords \u00d7 3 banks<\/div>\n
\u00a0LD instruction execution time: 0.04 \u03bcs<\/div>\n
\u00a0Number of Expansion Racks: 3<\/div>\n
\u00a0FB program memory (bytes): 1024 KB<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Name<\/strong><\/th>\nDisplay Section<\/strong><\/th>\nBuilt-in
\nEthernet
\nport<\/strong><\/th>\n		Model number<\/strong><\/th>\nStand-
\nards<\/strong><\/th>\n<\/tr>\n
Display
\ndevice<\/strong><\/th>\n		Case
\ncolor<\/strong><\/th>\n		Effective
\ndisplay area<\/strong><\/th>\n		Resolution<\/strong><\/th>\n<\/tr>\n
SYSMAC
\nOne
\nNSJ-
\nseries
\nNSJ
\nController<\/strong><\/th>\n		5.7-inch
\ncolor High-
\nluminance
\nTFT LCD<\/td>\n		Ivory<\/td>\n117.2 \u00d7 88.4 mm
\n(W \u00d7 H)
\n(5.7 inches)<\/td>\n		320 \u00d7 240
\n(QVGA)<\/td>\n		Yes<\/td>\nNSJ5-TQ11-G5D<\/strong><\/td>\nUC1, CE,
\nUL Type 4<\/td>\n<\/tr>\n
Black<\/td>\nNSJ5-TQ11B-G5D<\/strong><\/td>\n<\/tr>\n
8.4-inch
\ncolor
\nTFT LCD<\/td>\n		Ivory<\/td>\n170.9 \u00d7 128.2 mm
\n(W \u00d7 H)
\n(8.4 inches)<\/td>\n		640 \u00d7 480
\n(VGA)<\/td>\n		Yes<\/td>\nNSJ8-TV01-G5D<\/strong><\/td>\nUC1, CE<\/td>\n<\/tr>\n
Black<\/td>\nNSJ8-TV01B-G5D<\/strong><\/td>\n<\/tr>\n
10.4-inch
\ncolor
\nTFT LCD<\/td>\n		Ivory<\/td>\n215.2 \u00d7 162.4 mm
\n(W \u00d7 H)
\n(10.4 inches)<\/td>\n		Yes<\/td>\nNSJ10-TV01-G5D<\/strong><\/td>\nUC1, CE
\nUL Type4<\/td>\n<\/tr>\n
Black<\/td>\nNSJ10-TV01B-G5D<\/strong><\/td>\n<\/tr>\n
12.1-inch
\ncolor
\nTFT LCD<\/td>\n		Ivory<\/td>\n246.0 \u00d7 184.5 mm
\n(W \u00d7 H)
\n(12.1 inches)<\/td>\n		800 \u00d7 600
\n(SVGA)<\/td>\n		Yes<\/td>\nNSJ12-TS01-G5D<\/strong><\/td>\n<\/tr>\n
Black<\/td>\nNSJ12-TS01B-G5D<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Production of the NSJ[]-[][][][](B)-M3D, NSJ5-SQ1[](B)-G5D, NSJ5-TQ10(B)-G5D, NSJ8-TV00(B)-G5D,
\nNSJ10-TV00(B)-G5D and NSJ12-TS00(B)-G5D have been discontinued at the end of September 2012.<\/div>\n<\/div>\n<\/div>\n

Options and Expansion Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Expansion
\nUnits<\/strong><\/th>\n		NSJ
\nController
\nLink Unit<\/strong><\/th>\n		For increasing the number of Controller Link ports
\nSame as the CJ1W-CLK21-V1 Controller Link Unit
\nfor the CJ Series.<\/td>\n		NSJW-CLK21-V1<\/strong><\/td>\nUC1, CE<\/td>\n<\/tr>\n
NSJ Ethernet
\nUnit<\/strong><\/th>\n		For increasing the number of Ethernet ports
\nSame as the CJ1W-ETN21 Ethernet Unit for the
\nCJ Series.<\/td>\n		NSJW-ETN21<\/strong><\/td>\n<\/tr>\n
NSJ I\/O
\nControl Unit<\/strong><\/th>\n		For adding CJ-series Expansion Racks.
\nSame as the CJ1W-IC101 I\/O Control Unit for the
\nCJ Series.
\nUse the following I\/O Connecting Cables.<\/td>\n		NSJW-IC101<\/strong><\/td>\n<\/tr>\n
I\/O Connecting Cables<\/strong><\/th>\nFor connecting
\nCJ-series Expansion
\nRacks.<\/td>\n		0.3 m<\/td>\nCS1W-CN313<\/strong><\/td>\nN, L, CE<\/td>\n<\/tr>\n
0.7 m<\/td>\nCS1W-CN713<\/strong><\/td>\n<\/tr>\n
2 m<\/td>\nCS1W-CN223<\/strong><\/td>\n<\/tr>\n
3 m<\/td>\nCS1W-CN323<\/strong><\/td>\n<\/tr>\n
5 m<\/td>\nCS1W-CN523<\/strong><\/td>\n<\/tr>\n
10 m<\/td>\nCS1W-CN133<\/strong><\/td>\n<\/tr>\n
12 m<\/td>\nCS1W-CN133-B2<\/strong><\/td>\n<\/tr>\n
Memory Cards
\n(for both Controller
\nSection and Display
\nSection)<\/strong><\/th>\n		Flash memory: 128 MB<\/td>\nHMC-EF183<\/strong><\/td>\nN, L, CE<\/td>\n<\/tr>\n
Flash memory: 256 MB<\/td>\nHMC-EF283<\/strong><\/td>\n<\/tr>\n
Flash memory: 512 MB<\/td>\nHMC-EF583<\/strong><\/td>\n<\/tr>\n
Memory Card Adapter (for computer PCMIA slot)<\/td>\nHMC-AP001<\/strong><\/td>\nCE<\/td>\n<\/tr>\n
Peripheral Device
\nConnecting Cables
\nfor the RS-232C port<\/strong><\/th>\n		Connects computer,
\nD-Sub 9-pin, Length: 2.0 m<\/td>\n		Used for peripheral
\nbus or Host Link.
\nAnti-static
\nconnectors<\/td>\n		XW2Z-200S-CV<\/strong><\/td>\n—<\/td>\n<\/tr>\n
Connects computer,
\nD-Sub 9-pin, Length: 5.0 m<\/td>\n		XW2Z-500S-CV<\/strong><\/td>\n<\/tr>\n
Connects computer,
\nD-Sub 9-pin, Length: 2.0 m<\/td>\n		Used for Host Link
\nonly.
\nPeripheral bus not
\nsupported.<\/td>\n		XW2Z-200S-V<\/strong><\/td>\n<\/tr>\n
Connects computer,
\nD-Sub 9-pin, Length: 5.0 m<\/td>\n		XW2Z-500S-V<\/strong><\/td>\n<\/tr>\n
RS-422A Conversion
\nAdapter<\/strong><\/th>\n		Adapter for converting a
\nRS-232C port to a
\nRS-422A\/485 port.<\/td>\n		Communications
\ndistance: 500 m max.<\/td>\n		NS-AL002<\/strong><\/td>\n—<\/td>\n<\/tr>\n
Communications
\ndistance: 50 m max.<\/td>\n		CJ1W-CIF11<\/strong><\/td>\nUC1, CE,
\nN, L<\/td>\n<\/tr>\n
Battery life<\/strong><\/th>\n5 years at 25 \u00b0C<\/td>\nCJ1W-BAT01<\/strong><\/td>\nCE<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Differences between the NSJ[]-[][][][]-G5D and NSJ[]-[][][][]-M3D<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Model<\/strong><\/th>\nNSJ[]-[][][][]-G5D<\/strong><\/th>\nNSJ[]-[][][][]-M3D
\n(The following models are discontinued.)<\/strong><\/th>\n<\/tr>\n
UM capacity<\/strong><\/th>\n60 Ksteps<\/td>\n20 Ksteps<\/td>\n<\/tr>\n
I\/O<\/strong><\/th>\n1,280 points<\/td>\n640 points<\/td>\n<\/tr>\n
Extended data memory<\/strong><\/th>\n32 Kwords \u00d7 3 banks<\/td>\nNone<\/td>\n<\/tr>\n
EM file memory<\/strong><\/th>\nYes<\/td>\nNone<\/td>\n<\/tr>\n
Maximum number of Expansion Racks<\/strong><\/th>\n3<\/td>\n1<\/td>\n<\/tr>\n
FB program memory capacity<\/strong><\/th>\n1024 KB<\/td>\n256 KB<\/td>\n<\/tr>\n
Maximum number of FB definitions<\/strong><\/th>\n1024<\/td>\n128<\/td>\n<\/tr>\n
Maximum number of FB instances<\/strong><\/th>\n2048<\/td>\n256<\/td>\n<\/tr>\n
Variable table size<\/strong><\/th>\n128 KB<\/td>\n64 KB<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Support Software<\/h4>\n
\n
\n
\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specifications<\/strong><\/th>\nModel<\/strong><\/th>\nStand-
\nards<\/strong><\/th>\n<\/tr>\n
<\/th>\nNumber of
\nlicenses<\/strong><\/th>\n		Media<\/strong><\/th>\n<\/tr>\n
FA Integrated
\nTool Package
\nCX-One
\nVer.4.[]<\/td>\n		The CX-One is a comprehensive software
\npackage that integrates Support Software
\nfor OMRON PLCs and components.
\nCX-One runs on the following OS.
\nWindows XP (Service Pack 3 or higher,
\n32-bit version)\/
\nWindows Vista (32-bit\/64-bit version)\/
\nWindows 7 (32-bit\/64-bit version)\/
\nWindows 8 (32-bit\/64-bit version)\/
\nWindows 8.1 (32-bit\/64-bit version)\/
\nWindows 10 (32-bit\/64-bit version)<\/p>\n

CX-One Ver.4.[] includes CX-Designer
\nVer.3.[].
\nFor details, refer to the CX-One catalog
\n(Cat. No. R134).<\/td>\n

1 licence
\n*<\/td>\n		DVD<\/td>\nCXONE-AL01D-V4<\/strong><\/td>\n—<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specifications<\/h4>\n

Parts Names<\/h4>\n
\n
\"NSJ<\/div>\n<\/div>\n

NSJ Controllers<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Model<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
NSJ12-TS01-G5D<\/strong><\/th>\nNSJ10-TV01-G5D<\/strong><\/th>\nNSJ8-TV01-G5D<\/strong><\/th>\nNSJ5-TQ11-G5D<\/strong><\/th>\n<\/tr>\n
Supply voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Allowable supply
\nvoltage range<\/strong><\/th>\n		20.4 to 27.6 VDC (24 VDC \u00b1 15%)<\/td>\n<\/tr>\n
Power consumption<\/strong><\/th>\n30 W max.<\/td>\nTQ1[]: 22 W max.<\/td>\n<\/tr>\n
Current consumption<\/strong><\/th>\nController Section Internal 5 V: 500 mA max.
\nDeviceNet Section Internal 5 V: 200 mA max., External 24 V: 18 mA max.<\/td>\n<\/tr>\n
Inrush current *1<\/strong><\/th>\nAt 24 VAC: 10 A\/20 ms max. for cold start at room temperature<\/td>\n<\/tr>\n
Ambient operating
\ntemperature (depending
\non angle of display
\nsurface off horizontal)
\n*2<\/strong><\/th>\n		90 \u00b0 to 60 \u00b0: 0 to 50 \u00b0C
\n60 \u00b0 to 30 \u00b0: 0 to 45 \u00b0C
\n30 \u00b0 to 0 \u00b0: Use prohibited.<\/td>\n		90 \u00b0 to 30 \u00b0:
\n0 to 50 \u00b0C
\n30 \u00b0 to 0 \u00b0:
\n0 to 40 \u00b0C<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		– 20 to 60 \u00b0C<\/td>\n<\/tr>\n
Ambient operating
\nhumidity<\/strong><\/th>\n		0 to 40 \u00b0C: 35% to 85% (with no condensation)
\n40 to 50 \u00b0C: 35% to 60% (with no condensation)<\/td>\n<\/tr>\n
Ambient operating
\nenvironment<\/strong><\/th>\n		No corrosive gases<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. (at 100 VDC) between DC external and GR terminals<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n800 VDC for 1 min between DC external and GR terminals, leakage current: 10 mA max.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\n2 kV on power supply line (conforming to IEC 61000-4-4)<\/td>\n<\/tr>\n
Vibration resistance
\n(during operation)<\/strong><\/th>\n		10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m\/s2<\/sup>\u00a0in X, Y, and Z directions for 80 minutes<\/td>\n<\/tr>\n
Shock resistance
\n(during operation)<\/strong><\/th>\n		147 m\/s2<\/sup>, 3 times each in X, Y, and Z directions<\/td>\n<\/tr>\n
External
\ndimensions
\n*3<\/strong><\/th>\n		Without
\nExpansion
\nUnit<\/strong><\/th>\n		315 \u00d7 241 \u00d7 73.3 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n		232 \u00d7 177 \u00d7
\n73.3 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n		195 \u00d7 142 \u00d7
\n79 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n<\/tr>\n
With
\nExpansion
\nUnit<\/strong><\/th>\n		315 \u00d7 241 \u00d7 89.3 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n		232 \u00d7 177 \u00d7
\n89.3 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n		195 \u00d7 142 \u00d7
\n95 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n<\/tr>\n
Panel cutout
\ndimensions<\/strong><\/th>\n		302 +0.1, 0 \u00d7 228 +0.1, 0 mm (W \u00d7 H)
\nPanel thickness: 1.6 to 4.8 mm<\/td>\n		220.5 +0.50, 0 \u00d7
\n165.5 +0.50, 0 mm
\n(W \u00d7 H)
\nPanel thickness:
\n1.6 to 4.8 mm<\/td>\n		184 +0.50, 0 \u00d7
\n131 +0.50, 0 mm
\n(W \u00d7 H)
\nPanel thickness:
\n1.6 to 4.8 mm<\/td>\n<\/tr>\n
Grounding<\/strong><\/th>\n100 \u03a9 or less<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n2.7 kg max.<\/td>\n2.5 kg max.<\/td>\n2.0 kg max.<\/td>\n1.1 kg max.<\/td>\n<\/tr>\n
Degree of protection<\/strong><\/th>\nFront operating panel: Equivalent to IP65 Oil-proof type and
\nNEMA4 *4<\/td>\n		Front operating
\npanel: Equivalent
\nto IP65 Oil-proof
\ntype, NEMA4 and
\nUL Type 4 *4<\/td>\n<\/tr>\n
Battery life<\/strong><\/th>\n5 years (at 25\u00b0C)
\nThe SRAM and RTC will be backed up for 5 days after the battery runs low (i.e., after the
\nindicator lights orange).
\nThe SRAM and RTC will be backed up by a super capacitor for 5 minutes after removing
\nthe old battery (i.e., after turning ON power after 5 minutes).<\/td>\n<\/tr>\n
International standards<\/strong><\/th>\nConforms to cULus and EC Directives.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. A delay circuit that charges a capacitor is used to limit the inrush current. If a hot start is performed when the power
\nsupply has been OFF only a short period\u00a0of time, the capacitor will still be charged and the inrush current specified
\nabove will be exceeded by up to approximately five times the specified value.\u00a0When selecting fuses or breakers for
\nexternal circuits, allow sufficient margin in the melting temperatures, detection characteristics, and inrush current
\n*2. Display angles off horizontal are as follows:
\n\"nsj_series_sp_3\"<\/p>\n
*3. For detailed information, refer to \u201cDimensions\u201d.
\n*4. May not be applicable in locations with long-term exposure to oil.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

NSJ Expansion Units<\/h4>\n

Controller Link Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
Model<\/strong><\/th>\nNSJW-CLK21-V1<\/td>\n<\/tr>\n
Current consumption<\/strong><\/th>\n300 mA<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n100 g max.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Other general specifications are the same as the NSJ Controller.<\/p>\n<\/div>\n<\/div>\n

Ethernet Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
Model<\/strong><\/th>\nNSJW-ETN21<\/td>\n<\/tr>\n
Current consumption<\/strong><\/th>\n370 mA<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n100 g max.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Other general specifications are the same as the NSJ Controller.<\/p>\n<\/div>\n<\/div>\n

I\/O Control Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
Model<\/strong><\/th>\nNSJW-IC101<\/td>\n<\/tr>\n
Current consumption<\/strong><\/th>\n20 mA<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n100g max.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Other general specifications are the same as the NSJ Controller.<\/p>\n<\/div>\n<\/div>\n

Controller Section Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
Control method<\/strong><\/th>\nStored program<\/td>\n<\/tr>\n
I\/O control method<\/strong><\/th>\nCyclic scan and immediate processing are both possible.<\/td>\n<\/tr>\n
Programming<\/strong><\/th>\nLadder diagram<\/td>\n<\/tr>\n
CPU processing modes<\/strong><\/th>\nNormal Mode, Parallel Processing Mode with Asynchronous Memory Access, Parallel Processing Mode with Synchronous Memory Access, and Peripheral Servicing Priority Mode<\/td>\n<\/tr>\n
Instruction length<\/strong><\/th>\n1 to 7 steps per instruction<\/td>\n<\/tr>\n
Ladder instructions<\/strong><\/th>\nApprox. 400 (3-digit function codes)<\/td>\n<\/tr>\n
Execution
\ntime<\/strong><\/th>\n		Basic
\ninstructions<\/strong><\/th>\n		0.04 \u03bcs min.<\/td>\n<\/tr>\n
Special
\ninstructions<\/strong><\/th>\n		0.06 \u03bcs min.<\/td>\n<\/tr>\n
Overhead time<\/strong><\/th>\nNormal mode: 0.3 ms
\nParallel processing: 0.3 ms<\/td>\n<\/tr>\n
Installation<\/strong><\/th>\nInstalled using Panel Mounting Bracket.<\/td>\n<\/tr>\n
Mountable Expansion Units<\/strong><\/th>\nOne of the following can be mounted as an Expansion Unit:
\nNSJ I\/O Control Unit (NSJW-IC101)
\nNSJ Controller Link Unit (NSJW-CLK21-V1)
\nNSJ Ethernet Unit (NSJW-ETN21)<\/td>\n<\/tr>\n
Maximum number of
\nExpansion Racks<\/strong><\/th>\n		With the NSJW-IC101 I\/O Control Unit mounted, a maximum of three CJ-series Expansion Racks can be used with the NSJ[]-[][][][](B)-G5D.
\nA CJ-series CJ1W-II101 Interface Unit and Power Supply Unit are required for each Expansion Rack.<\/td>\n<\/tr>\n
Maximum number of
\nconnectable Units<\/strong><\/th>\n		Per Expansion Rack: 10 Units max. (Basic I\/O Units, Special I\/O Units, or CPU Bus Units)
\nA maximum of 30 Units (10 Units on CJ-series Expansion Rack \u00d7 3) can be mounted to the entire NSJ[]-[][][][](B)-G5D system.<\/td>\n<\/tr>\n
Number of tasks<\/strong><\/th>\n288 (cyclic tasks: 32, interrupt tasks: 256)
\nInterrupt tasks can be defined as cyclic tasks called “extra cyclic tasks.” Including these, up to 288 cyclic tasks can be used.
\nNote 1.
\nCyclic tasks are executed each cycle and are controlled with TKON(820) and TKOF(821) instructions.
\nNote 2.
\nThe following 3 types of interrupt tasks are supported: Power OFF interrupt task: 1 max., Scheduled interrupt tasks: 2 max., External interrupt tasks: 256 max.<\/td>\n<\/tr>\n
Interrupt types<\/strong><\/th>\nScheduled Interrupts: Interrupts generated at a time scheduled by the Controller Section’s built-in timer. (See note. 1)
\nPower OFF Interrupt (See note 2.): Interrupt executed when the Controller Section’s power is turned OFF.
\nExternal I\/O Interrupts: Interrupts from the Special I\/O Units or CPU Bus Units.
\nNote 1.
\nScheduled interrupt time interval is either 1 ms to 9,999 ms or 10 ms to 99,990 ms, in units of 1 ms or 10 ms.
\nNote 2.
\nNot supported when the CJ1W-PD022 Power Supply Unit is mounted.<\/td>\n<\/tr>\n
Calling subroutines from
\nmore than one task<\/strong><\/th>\n		Supported using global subroutines.<\/td>\n<\/tr>\n
Function blocks<\/strong><\/th>\nLanguages supported in function block definitions: Ladder programming language and structured text<\/td>\n<\/tr>\n
CIO
\n(Core I\/O)
\nArea<\/strong><\/th>\n		I\/O Area<\/strong><\/th>\n2,560 (160 words): CIO 000000 to CIO 015915 (words CIO 0000 to CIO 0159)
\nThe setting of the first rack word can be changed from the default (CIO 0000) so that CIO 0000 to CIO 0999 can be used.
\nI\/O bits are allocated to Basic I\/O Units.<\/td>\n		The CIO Area
\ncan be used
\nas work bits if
\nthe bits are
\nnot used
\nas shown here.<\/td>\n<\/tr>\n
Link Area<\/strong><\/th>\n3,200 (200 words): CIO 10000 to CIO 119915 (words CIO 1000 to CIO 1199)<\/td>\n<\/tr>\n
CPU Bus Unit
\nArea<\/strong><\/th>\n		6,400 (400 words): CIO 150000 to CIO 189915 (words CIO 1500 to CIO 1899)
\nCPU Bus Unit bits store operating status of CPU Bus Units. (25 words per Unit, 16 Units max.)<\/td>\n<\/tr>\n
Inner Board Area<\/strong><\/th>\n1,600 (100 words): CIO 190000 to CIO 199915 (words CIO 1900 to CIO 1999)
\nBits in the Inner Board Area are allocated to the display status area.<\/td>\n<\/tr>\n
C200H Special
\nI\/O Unit Area<\/strong><\/th>\n		15,360 (960 words): CIO 200000 to CIO 295915 (words CIO 2000 to CIO 2959)
\nBits in the Special I\/O Area can be allocated to Special I\/O Units (10 words per Unit, 96 Units max.)<\/td>\n<\/tr>\n
DeviceNet
\nArea<\/strong><\/th>\n		9,600 (600 words): CIO 320000 to CIO 379915 (words CIO 3200 to CIO 3799)
\nDeviceNet bits are allocated to Slaves for DeviceNet Section remote I\/O communications when the master function is used with fixed allocations.
\nFixed allocation setting 1 Outputs: CIO 3200 to CIO 3263 Inputs: CIO 3300 to CIO 3363
\nFixed allocation setting 2 Outputs: CIO 3400 to CIO 3463 Inputs: CIO 3500 to CIO 3563
\nFixed allocation setting 3 Outputs: CIO 3600 to CIO 3663 Inputs: CIO 3700 to CIO 3763
\nNote: The following words are allocated to the master function even when the DeviceNet Unit is used as a slave.
\nFixed allocation setting 1 Outputs: CIO 3370 (master to slave) Inputs: CIO 3270 (slave to master)
\nFixed allocation setting 2 Outputs: CIO 3570 (master to slave) Inputs: CIO 3470 (slave to master)
\nFixed allocation setting 3 Outputs: CIO 3770 (master to slave) Inputs: CIO 3670 (slave to master)<\/td>\n<\/tr>\n
Work bits<\/strong><\/th>\nCIO (Core I\/O)
\nArea<\/strong><\/th>\n		4,800 (300 words): CIO 120000 to CIO 149915 (words CIO 1200 to CIO 1499)
\n37,504 (2,344 words): CIO 380000 to CIO 614315 (words CIO 3800 to CIO 6143)
\nThese bits in CIO Area are used as work bits in programming to control program execution. They cannot be used for external I\/O.<\/td>\n<\/tr>\n
Work Area<\/strong><\/th>\n8,192 bits (512 words): W00000 to W51115 (words W000 to W511)
\nControl programs only. (I\/O from external I\/O terminals is not possible.)
\nNote: When using work bits in programming, use bits in Work Area first before using bits from other areas.<\/td>\n<\/tr>\n
Holding Area<\/strong><\/th>\n8,192 bits (512 words): H00000 to H51115 (words H000 to H511)
\nHolding bits are used to control execution of program, and maintain their ON\/OFF status when the PLC is turned OFF or operating mode is changed.
\nNote: Words H512 to H1535 are allocated to the Function Block Holding Area and are used only for the function block instance area (internally allocated variable area).<\/td>\n<\/tr>\n
Auxiliary Area<\/strong><\/th>\nRead only: 7,168 bits (448 words): A00000 to A44715 (words A000 to A447)
\nRead\/write: 8,192 bits (512 words): A44800 to A95915 (words A448 to A959)
\nAuxiliary bits are allocated specific functions.<\/td>\n<\/tr>\n
Temporary Area<\/strong><\/th>\n16 bits (TR00 to TR15) Temporary bits are used to store ON\/OFF execution conditions at program branches.<\/td>\nThe bits on the
\nleft can be used
\nas work bits
\nwhen they are
\nnot used for
\ntheir normal
\napplication<\/td>\n<\/tr>\n
Timer Area<\/strong><\/th>\n4,096: T0000 to T4095 (used for timers only)<\/td>\n<\/tr>\n
Counter Area<\/strong><\/th>\n4,096: C0000 to C4095 (used for counters only)<\/td>\n<\/tr>\n
DM Area<\/strong><\/th>\n32 Kwords: D00000 to D32767<\/td>\nUsed as a
\ngeneral-purpose
\ndata area for
\nreading and
\nwriting data in
\nword units (16
\nbits). Words in
\nthe DM Area
\nmaintain their
\nstatus when the
\nNSJ Controller
\nis turned OFF
\nor the operating
\nmode is changed.<\/td>\n<\/tr>\n
Special I\/O Unit DM Area:
\nD20000 to D29599
\n(100 words \u00d7 96 Units).<\/td>\n		Used to set parameters for
\nSpecial I\/O Units.<\/td>\n<\/tr>\n
CPU Bus Unit DM Area:
\nD30000 to D31599
\n(100 words \u00d7 16 Units).<\/td>\n		Used to set parameters for
\nCPU Bus Units.<\/td>\n<\/tr>\n
EM Area<\/strong><\/th>\nNSJ[]-[][][][](B)-G5D:
\n32 Kwords per bank, 3 banks max.: E0_00000 to E2_32767 max.
\nUsed as a general-purpose data area for reading and writing data in word units (16 bits). Words in EM Area maintain their status when the NSJ Controller is turned OFF or operating mode is changed.
\nThe EM Area is divided into banks, and addresses can be set by either of following methods.
\nChanging current bank using the EMBC (281) instruction and setting addresses for the current bank.
\nSetting bank numbers and addresses directly.
\nEM data can be stored in files by specifying number of first bank. (EM file memory)<\/td>\n<\/tr>\n
Index Registers<\/strong><\/th>\nIR0 to IR15. Store actual memory addresses for indirect addressing. Index registers can be used independently in each task. One register is 32 bits (2 words). Index registers can be specified as shared or independent for each task.<\/td>\n<\/tr>\n
Task Flag Area<\/strong><\/th>\n32 (TK0000 to TK0031). Task Flags are read-only flags that are ON when corresponding cyclic task is executable and OFF when corresponding task is not executable or in standby status.<\/td>\n<\/tr>\n
Trace Memory<\/strong><\/th>\n4,000 words (traceable data: 31 bits and 6 words)<\/td>\n<\/tr>\n
File Memory<\/strong><\/th>\nMemory Cards: Compact flash memory cards can be used (MS-DOS format).
\nEM file memory: Part of EM Area can be converted to file memory (MS-DOS format).
\nThe NSJ[]-[][][][](B)-M3D does not support EM file memory.<\/td>\n<\/tr>\n
Functions<\/strong><\/th>\nConstant cycle
\ntime<\/strong><\/th>\n		1 to 32,000 ms (Unit: 1 ms)
\nNote:
\nUsing the Parallel Processing Mode will create a constant cycle time for program execution.<\/td>\n<\/tr>\n
Cycle time
\nmonitoring<\/strong><\/th>\n		Possible (Unit stops operating if cycle is too long): 10 to 40,000 ms (Unit: 10 ms)
\nNote:
\nWhen the Parallel Processing Mode is used, the program execution cycle is monitored. Controller Section operation will stop if the peripheral servicing time exceeds 2 s.<\/td>\n<\/tr>\n
I\/O refreshing<\/strong><\/th>\nCyclic refreshing, immediate refreshing, refreshing by IORF(097).
\nNote:
\nIORF(097) refreshes I\/O bits allocated to Basic I\/O Units and Special I\/O Units.
\nThe CPU BUS UNIT I\/O REFRESH (DLNK(226)) instruction can be used to refresh bits allocated to CPU Bus Units in the CIO and DM Areas.<\/td>\n<\/tr>\n
Timing of
\nrefreshing
\nfor CPU
\nBus Units<\/strong><\/th>\n		Data links for Control Link Units, remote I\/O communications for DeviceNet Units, and other special data for CPU Bus Units is refreshed at the following times. During I\/O refresh period or when CPU BUS UNIT I\/O REFRESH (DLNK(226)) instruction is executed.<\/td>\n<\/tr>\n
I\/O memory
\nholding when
\nchanging
\noperating modes<\/strong><\/th>\n		Depends on ON\/OFF status of IOM Hold Bit in Auxiliary Area.<\/td>\n<\/tr>\n
Load OFF<\/strong><\/th>\nAll outputs on Output Units can be turned OFF when the Controller Section is operating in RUN, MONITOR, or PROGRAM mode.<\/td>\n<\/tr>\n
Timer\/counter
\nPV refresh
\nmethod<\/strong><\/th>\n		BCD or binary (CX-Programmer version 3.0 or higher)<\/td>\n<\/tr>\n
Input time
\nconstant
\nsetting<\/strong><\/th>\n		Time constants can be set for inputs from CJ-series Basic I\/O Units. The time constant can be increased to reduce influence of noise and chattering or it can be decreased to detect shorter pulses on inputs.<\/td>\n<\/tr>\n
Mode setting at
\npower-up<\/strong><\/th>\n		The operating mode can be specified.<\/td>\n<\/tr>\n
Flash memory<\/strong><\/th>\nThe user program and parameter area data (e.g., PLC Setup) are always backed up automatically in flash memory. (automatic backup and restore.)
\nWhen downloading projects from CX-Programmer Ver. 5.0 or higher, symbol table files (including CX-Programmer symbol names, I\/O comments), comment files (CX-Programmer rung comments, other comments), and program index files (CX-Programmer section names, section comments, or program comments) are stored in comment memory within the flash memory.<\/td>\n<\/tr>\n
Memory Card
\nfunctions
\n(Controller
\nSection)<\/strong><\/th>\n		Automatically reading programs (autoboot)
\nfrom the Memory Card when the power is
\nturned ON.<\/td>\n		Possible<\/td>\n<\/tr>\n
Program replacement during Controller
\nSection operation<\/td>\n		Possible<\/td>\n<\/tr>\n
Memory Card storage data<\/td>\nUser program: Program file format
\nPLC Setup and other parameters: Data file format
\nI\/O memory: Data file format (binary), text format, CSV format<\/td>\n<\/tr>\n
Memory Card read\/write method<\/td>\nUser program instructions, Programming Devices (including CX-Programmer
\nand Programming Console), Host Link computers, Auxiliary Area control bits,
\neasy backup operation<\/td>\n<\/tr>\n
Filing
\n(Controller
\nSection)<\/strong><\/th>\n		Memory Card data and EM (Extended Data Memory) Area can be handled as files.<\/td>\n<\/tr>\n
Debugging<\/strong><\/th>\nForce-set\/reset, differential monitoring, data tracing (scheduled, each cycle, or when instruction is executed), storing location generating error.<\/td>\n<\/tr>\n
Online editing<\/strong><\/th>\nUser programs can be overwritten in program block units when the Controller Section is in MONITOR or PROGRAM mode. This function is not supported for block programming areas. With the CX-Programmer, more than one program block can be edited at the same time.<\/td>\n<\/tr>\n
Program
\nprotection<\/strong><\/th>\n		Overwrite protection: Set using DIP switch or via the password from CX-Programmer peripheral device.
\nCopy protection: Password set using CX-Programmer.<\/td>\n<\/tr>\n
Error check<\/strong><\/th>\nUser-defined errors (i.e., user can define fatal errors and non-fatal errors)
\nThe FPD(269) instruction can be used to check execution time and logic of each programming block.
\nNote:
\nFAL and FALS instructions can be used to simulate errors.<\/td>\n<\/tr>\n
Error log<\/strong><\/th>\nUp to 20 errors are stored in error log. Information includes error code, error details, and time error occurred.
\nNote:
\nThe Controller Section can be set so that user-defined FAL errors are not stored in the error log.<\/td>\n<\/tr>\n
Clock<\/strong><\/th>\nProvided on all models.
\nAccuracy:<\/td>\n<\/tr>\n
Ambient temperature<\/strong><\/th>\nMonthly variation<\/strong><\/th>\n<\/td>\n<\/tr>\n
25\u00b0C<\/td>\n-1.5 to +1.5 min<\/td>\n<\/tr>\n
Note 1. Accuracy varies with the temperature.
\nNote 2. Used to store time when power is turned ON and when errors occur.<\/td>\n<\/tr>\n
Power OFF
\ndetection time<\/strong><\/th>\n		2 ms<\/td>\n<\/tr>\n
Power OFF
\ndetection delay
\ntime<\/strong><\/th>\n		0 ms fixed<\/td>\n<\/tr>\n
Memory
\nprotection<\/strong><\/th>\n		Held Areas: Holding bits, Data Memory, Extended Data Memory, and status of counter Completion Flags and present values.
\nNote:
\nIf IOM Hold Bit in Auxiliary Area is turned ON, and PLC Setup is set to maintain IOM Hold Bit status when power to the NSJ Controller is turned ON, contents of CIO Area, Work Area, part of Auxiliary Area, timer Completion Flag and present values, Index Registers, and Data Registers will be saved.<\/td>\n<\/tr>\n
Sending
\ncommands
\nto a Host Link
\ncomputer<\/strong><\/th>\n		FINS commands can be sent to a computer connected via Host Link System by executing Network Communications Instructions from the Controller Section.<\/td>\n<\/tr>\n
Remote
\nprogramming
\nand monitoring<\/strong><\/th>\n		Host Link communications can be used for remote programming and remote monitoring through a Controller Link System or Ethernet network.<\/td>\n<\/tr>\n
Eight-level
\ncommunications<\/strong><\/th>\n		Host Link communications can be used for remote programming and remote monitoring from devices on networks up to eight levels away (Controller Link Network, Ethernet Network, or other network).<\/td>\n<\/tr>\n
Storing
\ncomments
\nin CPU Unit<\/strong><\/th>\n		I\/O comments can be stored as symbol table files in Memory Cards in the Controller Section, EM file memory, or Comment Memory (see note).
\nNote: Supported for CX-Programmer Ver. 5.0 or later only.<\/td>\n<\/tr>\n
Program check<\/strong><\/th>\nProgram checks are performed at the beginning of operation for items such as no END(001) instruction and instruction errors. CX-Programmer can also be used to check programs.<\/td>\n<\/tr>\n
Battery life<\/strong><\/th>\n5 years at 25 \u00b0C (The battery life depends on the ambient operating temperature; 1.1 years min.)
\n(Battery set: CJ1W-BAT01; Use a Replacement Battery that is within two years of its date of manufacture.)<\/td>\n<\/tr>\n
Self-diagnostics<\/strong><\/th>\nController Section errors (watchdog timer), I\/O bus errors, memory errors, and battery errors<\/td>\n<\/tr>\n
Other functions<\/strong><\/th>\nStorage of number of times power has been interrupted. (Stored in A514.)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Display Section Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Model<\/strong><\/th>\nBuilt-in ports<\/strong><\/th>\n<\/tr>\n
USB port
\n(Slave: For
\nSupport Software)<\/strong><\/th>\n		RS-232C port<\/strong><\/th>\nDeviceNet
\nport<\/strong><\/th>\n		Ethernet
\nport<\/strong><\/th>\n		USB port
\n(Host:
\nFor printer)<\/strong><\/th>\n<\/tr>\n
NSJ5-TQ11-G5D<\/strong><\/th>\n1 port<\/td>\n3 ports
\nDisplay Section:
\nSerial ports A, B
\nController Section:
\nSerial port<\/td>\n		1 port<\/td>\n10\/
\n100Base-T<\/td>\n		None<\/td>\n<\/tr>\n
NSJ5-TQ11B-G5D<\/strong><\/th>\n<\/tr>\n
NSJ8-TV01-G5D<\/strong><\/th>\n10\/
\n100Base-T<\/td>\n		1 port<\/td>\n<\/tr>\n
NSJ8-TV01B-G5D<\/strong><\/th>\n<\/tr>\n
NSJ10-TV01-G5D<\/strong><\/th>\n10\/
\n100Base-T<\/td>\n<\/tr>\n
NSJ10-TV01B-G5D<\/strong><\/th>\n<\/tr>\n
NSJ12-TS01-G5D<\/strong><\/th>\n10\/
\n100Base-T<\/td>\n<\/tr>\n
NSJ12-TS01B-G5D<\/strong><\/th>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Model<\/strong><\/th>\nDisplay Section<\/strong><\/th>\n<\/tr>\n
Display color<\/strong><\/th>\nField of view<\/strong><\/th>\nLanguage<\/strong><\/th>\nStandard screen data capacity<\/strong><\/th>\n<\/tr>\n
NSJ5-TQ11-G5D<\/strong><\/th>\n256 colors
\n(BMP\/JPEG,
\n32,768 colors
\nfor images)<\/td>\n		Right\/left: \u00b180\u00b0,
\nTop: 80\u00b0,
\nBottom: 60\u00b0
\n*1<\/td>\n		Eight
\nlanguages
\n*2<\/td>\n		60 MB<\/td>\n<\/tr>\n
NSJ5-TQ11B-G5D<\/strong><\/th>\n<\/tr>\n
NSJ8-TV01-G5D<\/strong><\/th>\nRight\/left: \u00b180\u00b0,
\nTop: 80\u00b0,
\nBottom: 60\u00b0
\n*1<\/td>\n<\/tr>\n
NSJ8-TV01B-G5D<\/strong><\/th>\n<\/tr>\n
NSJ10-TV01-G5D<\/strong><\/th>\nRight\/left: \u00b170\u00b0,
\nTop: 65\u00b0,
\nBottom: 65\u00b0
\n*1<\/td>\n<\/tr>\n
NSJ10-TV01B-G5D<\/strong><\/th>\n<\/tr>\n
NSJ12-TS01-G5D<\/strong><\/th>\nRight\/left: \u00b180\u00b0,
\nTop: 80\u00b0,
\nBottom: 80\u00b0
\n*1<\/td>\n<\/tr>\n
NSJ12-TS01B-G5D<\/strong><\/th>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. LotNo.15Z10 or later of NS5 models, LotNo. 28X11 or later of NS8 models, LotNo. 11Y11 or later of NS10 models,
\nLotNo. 14Y11 or later of NS12 models.
\n*2. Japanese, English, Chinese (traditional and simplified), Spanish, Italian, German, and French.<\/div>\n<\/div>\n<\/div>\n

Communications Section Specifications<\/h4>\n

DeviceNet Section<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
Communications protocol<\/strong><\/th>\nDeviceNet<\/td>\n<\/tr>\n
DeviceNet master\/slave<\/strong><\/th>\nCan function as master or slave.<\/td>\n<\/tr>\n
Connection forms *1<\/strong><\/th>\nCombination of multi-drop and T-branch connections (for trunk or branch lines)<\/td>\n<\/tr>\n
Terminating resistance<\/strong><\/th>\nSW4 (TER) is used to connect\/disconnect terminating resistance. The TER indicator
\nlights when terminating resistance is connected.<\/td>\n<\/tr>\n
Baud rate<\/strong><\/th>\n500 kbps, 250 kbps, or 125 kbps (Set via DIP switch.)<\/td>\n<\/tr>\n
Communications distances<\/strong><\/th>\nBaud rate<\/strong><\/th>\nNetwork length<\/strong><\/th>\nBranch line length<\/strong><\/th>\nTotal branch line length<\/strong><\/th>\n<\/tr>\n
500 kbps<\/td>\n100 m max.<\/td>\n6 m max.<\/td>\n39 m max.<\/td>\n<\/tr>\n
250 kbps<\/td>\n250 m max. *2<\/td>\n6 m max.<\/td>\n78 m max.<\/td>\n<\/tr>\n
125 kbps<\/td>\n500 m max. *2<\/td>\n6 m max.<\/td>\n156 m max.<\/td>\n<\/tr>\n
Max. number of Slaves<\/strong><\/th>\n63 Slaves<\/td>\n<\/tr>\n
Error control<\/strong><\/th>\nCRC error check, node address redundancy check, scan list verification<\/td>\n<\/tr>\n
Cable<\/strong><\/th>\nSpecial 5-wire cable (2 signal lines, 2 power lines, 1 shield line)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Terminating resistance is required at both ends of the trunk line.
\n*2. Communications distances are for Thick Cables. Keep the maximum network length to 100 m or less when using
\nThin Cables.<\/div>\n<\/div>\n<\/div>\n

Controller Link (Wired)<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/th>\n<\/tr>\n
Communications method<\/strong><\/th>\nN: N token bus<\/td>\n<\/tr>\n
Code<\/strong><\/th>\nManchester code<\/td>\n<\/tr>\n
Modulation<\/strong><\/th>\nBaseband code<\/td>\n<\/tr>\n
Synchronization<\/strong><\/th>\nFlag synchronization (conforms to HDLC frames)<\/td>\n<\/tr>\n
Error control<\/strong><\/th>\nManchester code checks and CRC checks (CCITT X16<\/sup>\u00a0+X12<\/sup>\u00a0+X5<\/sup>\u00a0+1)<\/td>\n<\/tr>\n
Transmission path form<\/strong><\/th>\nMulti-drop bus<\/td>\n<\/tr>\n
Baud rate and maximum
\ntransmission distance<\/strong><\/th>\n		The maximum transmission distance varies with the baud rate as follows:
\n2 Mbps: 500 m
\n1 Mbps: 800 m
\n500 Kbps: 1 km<\/td>\n<\/tr>\n
Media<\/strong><\/th>\nSpecified shielded twisted-pair cable
\nNumber of signal lines: 2, shield line: 1<\/td>\n<\/tr>\n
Node connection method<\/strong><\/th>\nNSJ Controller Link Unit: Connected via a special connector (included)
\nPLC: Connected to a terminal block
\nIBM PC\/AT or compatible: Connected via a special connector (included)<\/td>\n<\/tr>\n
Maximum number of nodes<\/strong><\/th>\n32 or 62 nodes *1<\/td>\n<\/tr>\n
Communications functions<\/strong><\/th>\nData links and message service<\/td>\n<\/tr>\n
Number of data link words<\/strong><\/th>\nTransmission area per node: 1,000 words max.
\nData link area (send\/receive words) per node
\nNSJ Controller: 20,000 words
\nCS\/CJ Series:
\n20,000 words max. (unit Ver. 1.2 or later)
\n12,000 words max. (pre-Ver. 1.2)
\nSYSMAC \u03b1, CVM1\/CV, CQM1H: 8,000 words max.
\nPersonal computer: 32,000 or 62,000 words max. *2<\/td>\n<\/tr>\n
Data link areas<\/strong><\/th>\nBit-access areas (IR, AR, LR, CIO), DM Area (DM), and extended DM Area (EM)<\/td>\n<\/tr>\n
Message length<\/strong><\/th>\n2,012 bytes max. (including the header)<\/td>\n<\/tr>\n
RAS functions<\/strong><\/th>\nPolling node backup function
\nSelf-diagnosis function (hardware checking at startup)
\nEchoback test and broadcast test (using the FINS command)
\nWatchdog timer
\nError log function<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. At least one Repeater Unit (CS1W-RPT01) is required to construct networks that uses a node address higher than 32.
\nThe following Controller Link Units\/Support\u00a0Boards must also be used, and the Wired Network 62 Node Enable Bit of
\nthe DM Parameter Area software switch of all nodes must be turned ON (62\u00a0nodes max.).
\nCS1W-CLK23, CJ1W-CLK23, 3G8F7-CLK23, and NSJW-CLK21-V1
\n*2. For a maximum configuration of 62 nodes<\/div>\n<\/div>\n<\/div>\n

Ethernet Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecifications<\/strong><\/td>\n<\/tr>\n
Type<\/strong><\/th>\n100Base-TX (can be used as 10Base-T)<\/td>\n<\/tr>\n
Media access method<\/strong><\/th>\nCSMA\/CD<\/td>\n<\/tr>\n
Modulation method<\/strong><\/th>\nBaseband<\/td>\n<\/tr>\n
Transmission paths<\/strong><\/th>\nStar form<\/td>\n<\/tr>\n
Baud rate<\/strong><\/th>\n100 Mbps (100Base-TX)<\/td>\n100 Mbps (10Base-T)<\/td>\n<\/tr>\n
Transmission media<\/strong><\/th>\nUnshielded twisted-pair (UTP) cable
\nCategories: 5, 5e
\nShielded twisted-pair (STP) cable
\nCategories: 100 \u03a9 at 5, 5e<\/td>\n		Unshielded twisted-pair (UTP) cable
\nCategories: 3, 4, 5, 5e
\nShielded twisted-pair (STP) cable
\nCategories: 100 \u03a9 at 3, 4, 5, 5e<\/td>\n<\/tr>\n
Transmission distance<\/strong><\/th>\n100 m (distance between hub and node)<\/td>\n<\/tr>\n
Number of cascade connections<\/strong><\/th>\n2<\/td>\n4<\/td>\n<\/tr>\n
Functions<\/strong><\/th>\nFINS communications service
\nSocket services (UDP\/TCP)
\nFTP server
\nEmail send\/receive
\nAutomatic clock adjustment<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Differences between the Built-in Ethernet and Ethernet Unit Ports<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
<\/th>\nBuilt-in Ethernet port<\/strong><\/td>\nEthernet Unit port<\/strong><\/th>\n<\/tr>\n
Communications
\nwith another
\nhost (PLC)<\/strong><\/p>\n
\"nsj_series_sp_12_1\"<\/strong><\/div>\n<\/th>\n
Communications is possible with another host via Ethernet.
\nFor example, from one NSJ Controller, data can be displayed or settings can be made to another NSJ Controller or PLC.<\/td>\n		Same functions as at left.<\/td>\n<\/tr>\n
Connection with a
\nhost computer<\/strong><\/p>\n
\"nsj_series_sp_12_2\"<\/strong><\/div>\n<\/th>\n
Support Software Connections
\nCX-One (CX-Programmer, CX-Designer, etc.) can be used via Ethernet.
\nScreen data and ladder programs can be transferred from a host computer.
\nAccess to a Memory Card in the Display Section
\nA memory card in the Display Section can be accessed using Support Software or FTP and Ethernet. For example, Display Section recipe data and alarm or data log files can be downloaded from a host computer.
\nAccess to the Host from a Host Application
\nA host computer can access the Controller Section using FINS communications. For example, an application on a host computer can read or data can be written to the NSJ data memory (DM) (UDP only).<\/td>\n		Same functions as at left, plus the following:
\nA Memory Card in the Controller Section can be accessed.
\nThe clock can be set using SNTP
\nTCP\/IP support (See note.)
\n(The Memory Card in the Display Section cannot be accessed.)
\nNote: Ethernet (FINS\/TCP) not supported by CX-Programmer.<\/td>\n<\/tr>\n
E-mail<\/strong><\/th>\n—<\/td>\nE-mail can be sent and received.<\/td>\n<\/tr>\n
Communications
\nusing ladder
\nprogramming<\/strong><\/th>\n		—<\/td>\nSocket communications are possible using the CMND instruction.
\nSEND\/RCV instructions<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

\n
\n
NSJ12-TS01(B)-G5D<\/strong><\/div>\n
NSJ10-TV01(B)-G5D<\/strong><\/div>\n<\/div>\n
\"NSJ<\/div>\n<\/div>\n

NSJ8-TV01(B)-G5D<\/h4>\n
\n
\"NSJ<\/div>\n<\/div>\n

NSJ5-TQ11(B)-G5D<\/h4>\n
\n
\"NSJ<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n
\n
\n
\n
\n
\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NSJ Series Catalog<\/a><\/td>\nV406-E1-05
\n[4786KB]<\/span><\/td>\n		Apr 03, 2017<\/td>\n<\/tr>\n
\"\"\u00a0HMC-EF183 Data Sheet<\/a><\/td>\n–
\n[232KB]<\/span><\/td>\n		Jun 06, 2012<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n

<\/h2>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Contributes to the miniaturization and standardization of the operation unit’s control panel<\/h2>\n","protected":false},"featured_media":1465,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[96,63,72],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1464"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1464"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1465"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1464"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1464"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1464"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}