{"id":1392,"date":"2019-01-02T02:57:09","date_gmt":"2019-01-02T02:57:09","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1392"},"modified":"2019-01-02T02:57:10","modified_gmt":"2019-01-02T02:57:10","slug":"nx-ecs-3","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/nx-ecs-3\/","title":{"rendered":"NX-ECS[][][]"},"content":{"rendered":"
\n
\n

\u2022 SSI clock frequency up to 2 MHz<\/p>\n

\u2022 High-speed remote I\/O control with communications cycle as fast as 125 \u03bcs*1<\/p>\n

\u2022 Free-run refreshing, synchronous I\/O refreshing, or task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit<\/p>\n

\u2022 The MC Function Modules of the NJ\/NX\/NY5 Controllers allows the encoder to be used as a motion axis<\/p>\n

\u2022 Choice of SSI Coding Methods (No conversion, binary code, or gray code)<\/p>\n

\u2022 Time Stamping<\/p>\n

\u2022 Multi-turn and single-turn encoders supported<\/p>\n

\u2022 Data Refresh Status (Data refreshing can be checked on the host controller.)<\/p>\n

\u2022 Maximum connecting SSI cable length: 400 m<\/p>\n

\u2022 Connect to the CJ PLC using the EtherNet\/IPTM<\/sup>\u00a0bus coupler<\/p>\n<\/div>\n<\/div>\n

\n
\n

*1. When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203.
\n*2. Task Period Prioritized refreshing is available when the NX-ECC203 is used together.<\/p>\n<\/div>\n<\/div>\n

\n
\n

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
\nEtherCAT\u00ae is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet\/IP\u2122 is a trademark of ODVA.
\nOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

Applicable standards<\/h4>\n
\n
\n

Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Position Interface: SSI Input Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Number
\nof
\nchannels<\/strong><\/th>\n		Input\/
\nOutput
\nform<\/strong><\/th>\n		Maximum
\ndata
\nlength<\/strong><\/th>\n		Encoder
\npower
\nsupply<\/strong><\/th>\n		Type of
\nexternal
\nconnections<\/strong><\/th>\n<\/tr>\n
SSI Input
\nUnits
\n\"3191_lu_1_1\"<\/strong><\/th>\n		1<\/td>\nEIA standard
\nRS-422-A<\/td>\n		32 bits<\/td>\n24 VDC,
\n0.3 A\/CH<\/td>\n		Screwless push-
\nin terminal block
\n(12 terminals)<\/td>\n		NX-ECS112<\/strong><\/td>\n<\/tr>\n
2<\/td>\nEIA standard
\nRS-422-A<\/td>\n		32 bits<\/td>\n24 VDC,
\n0.3 A\/CH<\/td>\n		Screwless push-
\nin terminal block
\n(12 terminals)<\/td>\n		NX-ECS212<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nFor 10 Units (Terminal Block: 30 pins, Unit: 30 pins)<\/td>\nNX-AUX02<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
No. of
\nterminals<\/strong><\/th>\n		Terminal number
\nindications<\/strong><\/th>\n		Ground
\nterminal mark<\/strong><\/th>\n		Terminal current
\ncapacity<\/strong><\/th>\n<\/tr>\n
Terminal Block<\/strong><\/th>\n12<\/td>\nC\/D<\/td>\nNone<\/td>\n10 A<\/td>\nNX-TBB122<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Accessories<\/h4>\n
\n
\n

Not included.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specification<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to less than 100 \u03a9<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating
\ntemperature<\/strong><\/th>\n		0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating
\nhumidity<\/strong><\/th>\n		10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\nPollution degree 2 or less: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\nConforms to IEC61000-4-4, 2 kV (power supply line)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>,
\n100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min
\ntotal)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and Z directions<\/td>\n<\/tr>\n
Applicable standards *<\/strong><\/th>\ncULus: Listed (UL508) or Listed (UL 61010-2-201), ANSI\/ISA 12.12.01,
\nEU: EN 61131-2, C-Tick or RCM, KC Registration, NK, LR<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

SSI Input Unit Specifications<\/h4>\n

SSI Input Unit 1 channel NX-ECS112<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nSSI Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ECS112<\/td>\n<\/tr>\n
Number of channels<\/strong><\/th>\n1 channel<\/td>\nType of external
\nconnections<\/strong><\/th>\n		Screwless push-in terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing, synchronous I\/O refreshing or task period prioritized refreshing *1<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\n\"3191_sp_2_1\"<\/td>\nInput signals<\/strong><\/th>\nExternal inputs: 2 Data input (D+, D-)
\nExternal outputs: 2 Clock output (C+,
\nC-)<\/td>\n<\/tr>\n
I\/O interface<\/strong><\/th>\nSynchronized serial interface (SSI)<\/td>\n<\/tr>\n
Clock output<\/strong><\/th>\nEIA standard RS-422-A line driver levels<\/td>\n<\/tr>\n
Data input<\/strong><\/th>\nEIA standard RS-422-A line receiver levels<\/td>\n<\/tr>\n
Maximum data length<\/strong><\/th>\n32 bits (The single-turn, multi-turn, and status data length can be set.)<\/td>\n<\/tr>\n
Coding method<\/strong><\/th>\nNo conversion, binary code, or gray code<\/td>\n<\/tr>\n
Baud Rate<\/strong><\/th>\n100 kHz, 200 kHz, 300 kHz, 400 kHz, 500 kHz, 1.0 MHz, 1.5 MHz, or 2.0 MHz<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 \u00d7 100 \u00d7 71 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n		Isolation method<\/strong><\/th>\nDigital isolator<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric
\nstrength<\/strong><\/th>\n		510 VAC between isolated circuits for
\n1 minute with leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nsource<\/strong><\/th>\n		Supplied from the NX bus.
\n20.4 to 28.8 VDC
\n(24 VDC +20%\/-15%)<\/td>\n		Current capacity
\nof I\/O power
\nsupply terminals<\/strong><\/th>\n		IOV: 0.3 A max. per terminal
\nIOG: 0.3 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.20 W max.
\n\u2022 Connected to a Commu-
\nnications Coupler Unit
\n0.85 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		20mA<\/td>\n<\/tr>\n
Maximum transmission
\ndistance *2<\/strong><\/th>\n		Baud Rate<\/strong><\/th>\nMaximum transmission distance<\/strong><\/th>\n<\/tr>\n
100 kHz<\/td>\n400m<\/td>\n<\/tr>\n
200 kHz<\/td>\n190m<\/td>\n<\/tr>\n
300 kHz<\/td>\n120m<\/td>\n<\/tr>\n
400 kHz<\/td>\n80m<\/td>\n<\/tr>\n
500 kHz<\/td>\n60m<\/td>\n<\/tr>\n
1.0 MHz<\/td>\n25m<\/td>\n<\/tr>\n
1.5 MHz<\/td>\n10m<\/td>\n<\/tr>\n
2.0 MHz<\/td>\n5m<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65g<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3191_sp_2_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3191_sp_2_3\"<\/td>\n<\/tr>\n
Failure detection<\/strong><\/th>\nNone<\/td>\nProtection<\/strong><\/th>\nNone<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The I\/O refreshing method is automatically set according to the connected Communications Coupler Unit and CPU
\nUnit.
\nRefer to information on the I\/O refreshing methods in the W524 manual for the communications cycles for each
\nmodel.
\n*2. The maximum transmission distance for an SSI Input Unit depends on the baud rate due to the delay that can result
\nfrom the responsiveness of the connected encoder and cable impedance. The maximum transmission distance is
\nonly a guideline. Review the specifications for the cables and encoders in the system and evaluate the operation of
\nthe equipment before use.<\/div>\n<\/div>\n<\/div>\n

SSI Input Unit 2 channel NX-ECS212<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nSSI Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ECS212<\/td>\n<\/tr>\n
Number of channels<\/strong><\/th>\n2 channels<\/td>\nType of external
\nconnections<\/strong><\/th>\n		Screwless push-in terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing, synchronous I\/O refreshing or task period prioritized refreshing *1<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\n\"3191_sp_3_1\"<\/td>\nInput signals<\/strong><\/th>\nExternal inputs: 2 Data input (D+, D-)
\nExternal outputs: 2 Clock output (C+,
\nC-)<\/td>\n<\/tr>\n
I\/O interface<\/strong><\/th>\nSynchronized serial interface (SSI)<\/td>\n<\/tr>\n
Clock output<\/strong><\/th>\nEIA standard RS-422-A line driver levels<\/td>\n<\/tr>\n
Data input<\/strong><\/th>\nEIA standard RS-422-A line receiver levels<\/td>\n<\/tr>\n
Maximum data length<\/strong><\/th>\n32 bits (The single-turn, multi-turn, and status data length can be set.)<\/td>\n<\/tr>\n
Coding method<\/strong><\/th>\nNo conversion, binary code, or gray code<\/td>\n<\/tr>\n
Baud Rate<\/strong><\/th>\n100 kHz, 200 kHz, 300 kHz, 400 kHz, 500 kHz, 1.0 MHz, 1.5 MHz, or 2.0 MHz<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 \u00d7 100 \u00d7 71 mm
\n(W \u00d7 H \u00d7 D)<\/td>\n		Isolation method<\/strong><\/th>\nDigital isolator<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric
\nstrength<\/strong><\/th>\n		510 VAC between isolated circuits for
\n1 minute with leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nsource<\/strong><\/th>\n		Supplied from the NX bus.
\n20.4 to 28.8 VDC
\n(24 VDC +20%\/-15%)<\/td>\n		Current capacity
\nof I\/O power
\nsupply terminals<\/strong><\/th>\n		IOV: 0.3 A max. per terminal
\nIOG: 0.3 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.25 W max.
\n\u2022 Connected to a Commu-
\nnications Coupler Unit
\n0.9 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30mA<\/td>\n<\/tr>\n
Maximum transmission
\ndistance *2<\/strong><\/th>\n		Baud Rate<\/strong><\/th>\nMaximum transmission distance<\/strong><\/th>\n<\/tr>\n
100 kHz<\/td>\n400m<\/td>\n<\/tr>\n
200 kHz<\/td>\n190m<\/td>\n<\/tr>\n
300 kHz<\/td>\n120m<\/td>\n<\/tr>\n
400 kHz<\/td>\n80m<\/td>\n<\/tr>\n
500 kHz<\/td>\n60m<\/td>\n<\/tr>\n
1.0 MHz<\/td>\n25m<\/td>\n<\/tr>\n
1.5 MHz<\/td>\n10m<\/td>\n<\/tr>\n
2.0 MHz<\/td>\n5m<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65g<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3191_sp_3_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3191_sp_3_3\"<\/td>\n<\/tr>\n
Failure detection<\/strong><\/th>\nNone<\/td>\nProtection<\/strong><\/th>\nNone<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The I\/O refreshing method is automatically set according to the connected Communications Coupler Unit and CPU
\nUnit.
\nRefer to information on the I\/O refreshing methods in the W524 manual for the communications cycles for each
\nmodel.
\n*2. The maximum transmission distance for an SSI Input Unit depends on the baud rate due to the delay that can result
\nfrom the responsiveness of the connected encoder and cable impedance. The maximum transmission distance is
\nonly a guideline. Review the specifications for the cables and encoders in the system and evaluate the operation of
\nthe equipment before use.<\/div>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n

Connected to a CPU Unit<\/h4>\n
\n
\n

Refer to the user’s manual for the CPU Unit details on the CPU Units to which NX Units can be connected.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCPU Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-ECS112<\/td>\nVer. 1.0<\/td>\nVer. 1.13<\/td>\nVer. 1.17<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\n<\/tr>\n
Ver. 1.2<\/td>\n<\/tr>\n
NX-ECS212<\/td>\nVer. 1.0<\/td>\nVer. 1.13<\/td>\nVer. 1.17<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\n<\/tr>\n
Ver. 1.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.<\/p>\n<\/div>\n<\/div>\n

Connected to an EtherCAT Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nEtherCAT
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or Industrial PC<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-ECS112<\/td>\nVer. 1.0<\/td>\nVer. 1.1 *1<\/td>\nVer. 1.06 *1<\/td>\nVer. 1.07<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\nVer. 1.08<\/td>\n<\/tr>\n
Ver. 1.2<\/td>\nVer. 1.3 *2*3<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-ECS212<\/td>\nVer. 1.0<\/td>\nVer. 1.1 *1<\/td>\nVer. 1.06 *1<\/td>\nVer. 1.07<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\nVer. 1.08<\/td>\n<\/tr>\n
Ver. 1.2<\/td>\nVer. 1.3 *2*3<\/td>\nVer. 1.13<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.
\n*1. You can use the following versions if time stamp refreshing is not used.
\n*2. To use task period prioritized refreshing, you must use the NX-ECC203.
\n*3. If you do not use task period prioritized refreshing, you can use EtherCAT Coupler Units which support Position Interface Units with unit version 1.1 or earlier.
\n*4. If you do not use task period prioritized refreshing, you can use EtherCAT Coupler Units with unit version 1.0.<\/p>\n<\/div>\n<\/div>\n

Connected to an EtherNet\/IP Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n
Model<\/strong><\/th>\nUnit
\nversion<\/strong><\/th>\n		Application with an NJ\/NX\/NY-series Controller
\n*1<\/strong><\/th>\n		Application with a CS\/CJ\/CP-series PLC *2<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		NX-IO
\nConfigurator *3<\/strong><\/th>\n<\/tr>\n
NX-ECS112<\/td>\nVer. 1.0<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\n<\/tr>\n
Ver. 1.2<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-ECS212<\/td>\nVer. 1.0<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\n<\/tr>\n
Ver. 1.2<\/td>\nVer. 1.13<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: 1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.
\nNote: 2. You cannot connect the relevant NX Unit or use the relevant NX Unit function if \u201c—\u201d is shown in the corresponding unit versions\/versions column.
\n*1. Refer to the user’s manual of the EtherNet\/IP Coupler Unit for the unit versions of EtherNet\/IP Units corresponding to EtherNet\/IP Coupler Units.
\n*2. Refer to the user’s manual of the EtherNet\/IP Coupler Unit for the unit versions of CPU Units and EtherNet\/IP Units corresponding to EtherNet\/IP Coupler Units.
\n*3. For connection to an EtherNet\/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect by any other path. If you need to connect by another path, use an EtherNet\/IP Coupler Unit with unit version 1.2 or later.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

Screwless Clamping Terminal Block Type<\/h4>\n

12 mm Width<\/h4>\n
\n
\"NX-ECS[][][] <\/p>\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-EC0\/ECS\/PG0 Data Sheet<\/a><\/td>\n–
\n[7485KB]<\/span><\/td>\n		Aug 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Synchronous Serial Interface (SSI) to connect external axes to the Sysmac system<\/p>\n","protected":false},"featured_media":1353,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[98,63],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1392"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1392"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1353"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1392"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1392"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1392"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}