{"id":1380,"date":"2019-01-02T02:26:22","date_gmt":"2019-01-02T02:26:22","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1380"},"modified":"2019-01-02T02:26:24","modified_gmt":"2019-01-02T02:26:24","slug":"nx-tc-2","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/nx-tc-2\/","title":{"rendered":"NX-TC"},"content":{"rendered":"

The adjustments made by skilled workers are automated using AI. The innovation of production sites has begun.<\/h4>\n

Optimal and automatic temperature control without human intervention easily achieves both productivity and quality.<\/h4>\n
\n
\n

Previous temperature controllers have not only required a long time for start-up settings and variation adjustments, it has also been difficult to make the optimal adjustments without having experience and intuition. There were therefore some effects on quality.
\nIn response to this situation, OMRON developed temperature controllers that includes “adaptive control technology.”
\nThis makes it possible to detect the changes in the status which will have an effect on quality and to automatically control the temperature so that the optimal state is always maintained, in the same way as a skilled worker would.
\nThis frees production sites from troublesome start-up and adjustment work.<\/p>\n<\/div>\n<\/div>\n

Causes of temperature variations on production lines<\/h4>\n
\n
\"NX-TC<\/div>\n<\/div>\n

The answer was the industry’s first inclusion* of “adaptive control technology”<\/h4>\n
\n
\n

With the “adaptive control” incorporated into this product, the optimal PID value is calculated automatically for both the time of the start-up and for during stable production. Furthermore, it is possible to monitor the temperature control status of the machine to automatically adjust the PID value to obtain the optimal temperature control in response to changes such as workpiece changes and machine changes.<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n
\n
\n

* According to an investigation by OMRON of general-purpose temperature controllers for FA as of March 2017.<\/p>\n<\/div>\n<\/div>\n

[New value that supports advances in packaging machines] The sealing temperature is measured accurately and controlled automatically for packaging machines that can maintain quality even at higher speeds.<\/h4>\n

Issues at production sites<\/h4>\n
\n
\n

\u00b7 Faster packaging to respond to the demand for foodstuffs arising due to the population increases in emerging nations
\n\u00b7 Increase in speed even when performing multiple-product production using a wide variety of packaging materials
\n\u00b7 At higher speeds, the temperature difference between the sealing surface and the control temperature widens, so the failure rate rises\u2026<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n

E5[]D\/NX-TC solve the issues<\/h4>\n

The temperature of the sealing surface is stably controlled automatically with measurement of the sealing surface temperature and algorithms to suppress variations.<\/h4>\n
\n
\n

Even if the speed of the packaging process is increased, the difference between the sealing temperature and the control temperature is minimized to perform stable automatic control, so it is possible to realize faster production while maintaining the product quality.
\nThis also contributes to the use of thinner packaging materials and to high precision control.<\/p>\n<\/div>\n<\/div>\n

Even with the production of multiple products that require changes to the settings, automatic control reduces the work<\/h4>\n
\n
\n

Even in the production of multiple products, which hinders faster speeds because a change of packaging materials can mean that time is required to change the settings, the use of automatic control that has a small error in the sealing temperature enables a speedy response at production sites.<\/p>\n<\/div>\n<\/div>\n

Control performance that achieves new value<\/h4>\n

The temperature error is minimized with a temperature sensor for packaging machines* and an algorithm for packaging machines (automatic filter adjustment function)<\/h4>\n
\n
\n

*Sold separately<\/p>\n<\/div>\n<\/div>\n

“Temperature sensors for packaging machines” to measure the temperature of the sealing surface<\/h4>\n
\n
\n

The temperature of the heating bar surface is measured accurately and there is no effect from factors causing temperature variations, such as the speed of the packaging machine and changes to the packaging materials.<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n

“Automatic filter adjustment function” to suppress the instability in surface temperature measurements<\/h4>\n
\n
\n

By using the temperature sensor for packaging machines and the automatic filter adjustment function, it becomes possible to control the quality with the sealing temperature while also suppressing variation in the temperature with just a temperature controller, without relying on adjustments by workers.<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n

[New value that supports advances in molding machines] Stable control of the temperature changes arising from faster speeds is performed automatically to realize molding machines that can maximize production capacity.<\/h4>\n

Issues at production sites<\/h4>\n
\n
\n

\u00b7 Increased productivity to respond to demand expansion related to infrastructure as a result of the economic development of the emerging nations and the transfer of production bases overseas.
\n\u00b7 At higher speeds, adjustments by the workers become necessary to respond to temperature variations arising due to factors such as the materials compounding and cooling water\u2026
\n\u00b7 It is difficult to achieve high speed production while also maintaining the quality\u2026<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n

E5[]D\/NX-TC solve the issues<\/h4>\n

Temperature variations due to speed changes and changes in the status of machines are suppressed without adjustments by the workers<\/h4>\n
\n
\n

Stable control is achieved automatically by detecting the temperature variations on the heat generating parts of the material that occur when the speed of the extrusion molding machine is increased and by detecting the temperature variations due to variation in the cooling water. The work required for setting are also greatly reduced.<\/p>\n<\/div>\n<\/div>\n

Also saves energy on the machine<\/h4>\n
\n
\n

The stable control reduces the wasteful use of energy on the heater by up to 40% compared with conventional machines.
\n* Data measured by OMRON on a water-cooled twin screw extrusion molding machine.<\/p>\n<\/div>\n<\/div>\n

Control performance that achieves new value<\/h4>\n

Temperature variations are minimized with an algorithm for molding machines (water-cooling output adjustment function)<\/h4>\n
\n
\n

On a water-cooled extrusion molding machine, increased speed leads to temperature variations due to various causes and it was previously necessary for the workers to repeatedly make valve adjustments to stabilize the quality.
\nWith the E5[]D\/NX-TC, the water-cooling output adjustment function suppresses the temperature variations to a minimum and raises the production capacity with the quality maintained.<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n

“Water-cooling output adjustment function” to simultaneously suppress the causes of temperature variations and maintain stable performance<\/h4>\n
\n
\"NX-TC<\/div>\n<\/div>\n

Push-In Plus Technology for Easy Wiring<\/h4>\n

E5[]D-B\/NX-TC<\/h4>\n
\n
\n

Just Insert Wires: No Tools Required
\nNow you can use Push-In Plus technology to reduce the time and work involved in wiring.<\/p>\n<\/div>\n<\/div>\n

Greatly Reduce Wiring Work<\/h4>\n
\n
\"NX-TC<\/div>\n
\n

*Information for Push-In Plus and screw terminal blocks is based on OMRON’s actual measurement value data.<\/p>\n<\/div>\n<\/div>\n

Easy to Insert<\/h4>\n
\n
\n

OMRON\u2019s Push-In Plus technology are as easy as inserting to an earphone jack. They help reduce the work load and improve wiring quality.<\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n
\n
\"NX-TC<\/div>\n
\n

Our shared Value Design for Panel (herein after referred to as “Value Design”) concept for the specifications of products used in control panels will create new value to our customer\u2019s control panels.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

International Standards<\/h4>\n
\n
\n

\u2022 The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, CE: EU Directives, RCM: Regulatory Compliance Mark, KC: KC Registration, and EAC: EAC Mark.<\/p>\n

\u2022 Contact your OMRON representative for further details and applicable conditions for these standards.<\/p>\n<\/div>\n<\/div>\n

Temperature Control Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit
\ntype<\/strong><\/th>\n		Product
\nname<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\nStand-
\nards<\/strong><\/th>\n<\/tr>\n
Num-
\nber of
\nchan-
\nnels<\/strong><\/th>\n		Input
\ntype<\/strong><\/th>\n		Out-
\nput<\/strong><\/th>\n		Output
\ncapac-
\nity<\/strong><\/th>\n		CT
\nInput
\nca-
\npacity<\/strong><\/th>\n		Con-
\ntrol
\ntype<\/strong><\/th>\n		Con-
\nver-
\nsion
\ntime<\/strong><\/th>\n		I\/O re-
\nfreshing
\nmethod<\/strong><\/th>\n<\/tr>\n
NX
\nSeries
\nTemper-
\nature
\nControl
\nUnit<\/strong><\/th>\n		Temper-
\nature
\nControl
\nUnit
\n2Ch
\ntype
\n\"3699_lu_1_1\"<\/strong><\/th>\n		2 Ch<\/td>\nMulti-
\ninput
\n(Therm-
\nocouple
\nand
\nResistance
\nthermom-
\neter)<\/td>\n		Voltage
\noutput
\n(for
\ndriving
\nSSR)<\/td>\n		2
\npoints<\/td>\n		2
\npoints<\/td>\n		Standard
\nControl<\/td>\n		50 m
\nsec<\/td>\n		Free-
\nRun
\nrefreshing<\/td>\n		NX-TC2405<\/strong><\/td>\nUC1,
\nCE,
\nRCM,
\nKC,
\nEAC<\/td>\n<\/tr>\n
None<\/td>\nStandard
\nControl<\/td>\n		NX-TC2406<\/strong><\/td>\n<\/tr>\n
Voltage
\noutput
\n(for
\ndriving
\nSSR)<\/td>\n		4
\npoints<\/td>\n		None<\/td>\nHeating
\nand
\nCooling
\nControl<\/td>\n		NX-TC2407<\/strong><\/td>\n<\/tr>\n
Linear
\ncurrent
\noutput<\/td>\n		2
\npoints<\/td>\n		None<\/td>\nStandard
\nControl<\/td>\n		NX-TC2408<\/strong><\/td>\n<\/tr>\n
Temper-
\nature
\nControl
\nUnit
\n4Ch
\ntype
\n\"3699_lu_1_2\"<\/strong><\/th>\n		4 Ch<\/td>\nVoltage
\noutput
\n(for
\ndriving
\nSSR)<\/td>\n		4
\npoints<\/td>\n		4
\npoints<\/td>\n		Standard
\nControl<\/td>\n		NX-TC3405<\/strong><\/td>\n<\/tr>\n
None<\/td>\nStandard
\nControl<\/td>\n		NX-TC3406<\/strong><\/td>\n<\/tr>\n
Voltage
\noutput
\n(for
\ndriving
\nSSR)<\/td>\n		8
\npoints<\/td>\n		None<\/td>\nHeating
\nand
\nCooling
\nControl<\/td>\n		NX-TC3407<\/strong><\/td>\n<\/tr>\n
Linear
\ncurrent
\noutput<\/td>\n		4
\npoints<\/td>\n		None<\/td>\nStandard
\nControl<\/td>\n		NX-TC3408<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nPins for 10 Units
\n(30 terminal block pins and 30 Unit pins)<\/td>\n		NX-AUX02<\/strong><\/td>\n—<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Current Transformer (CT)<\/strong><\/th>\nHole diameter: 5.8 mm<\/td>\nE54-CT1<\/strong><\/td>\n—<\/td>\n<\/tr>\n
Hole diameter: 5.8 mm<\/td>\nE54-CT1L *<\/strong><\/td>\n—<\/td>\n<\/tr>\n
Hole diameter: 12.0 mm<\/td>\nE54-CT3<\/strong><\/td>\n—<\/td>\n<\/tr>\n
Hole diameter: 12.0 mm<\/td>\nE54-CT3L *<\/strong><\/td>\n—<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Lead wires are included with these CTs. If UL certification is required, use these CTs.<\/p>\n<\/div>\n<\/div>\n

Accessories<\/h4>\n
\n
\n

Not included.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to 100 \u03a9 or less<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating temperature<\/strong><\/th>\n0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating humidity<\/strong><\/th>\n10 to 95% RH (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage temperature<\/strong><\/th>\n-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\nPollution degree 2 or less: Conforms to JIS B 3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\nConforms to IEC 61000-4-4, 2 kV (power supply line)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B 3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6. 5 to 8.4 Hz with amplitude of 3.5 mm,
\n8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>\u00a0100 min each in X, Y, and Z
\ndirections (10 sweeps of 10 min each = 100 min total)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and Z
\ndirections<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated circuits (at 100 VDC)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for 1 minute at a leakage current
\nof 5 mA max.<\/td>\n<\/tr>\n
Applicable standards *<\/strong><\/th>\ncULus: Listed (UL 61010-2-201), ANSI\/ISA 12.12.01,
\nEU: EN 61131-2, RCM, KC: KC Registration, EAC<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

List of Functions<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Function name<\/strong><\/th>\nDescription<\/strong><\/th>\nApplicable units<\/strong><\/th>\n<\/tr>\n
Free-Run Refreshing<\/td>\nWith this I\/O refreshing method, the refresh cycle of the NX
\nbus and the I\/O refresh cycles of the NX Units are
\nasynchronous.<\/td>\n		All models<\/td>\n<\/tr>\n
Selecting Channel To Use<\/td>\nThis function disables control processing, error detection, and
\noutput for unused channels. The conversion time for its own
\nUnit will not be shortened even if errors are disabled.<\/td>\n		All models<\/td>\n<\/tr>\n
Input
\nFunctions<\/td>\n		Input Type Setting<\/td>\nThis function sets the input type of the sensor connected to
\nthe temperature input.<\/td>\n		All models<\/td>\n<\/tr>\n
Temperature Unit
\nSetting (\u00b0C\/\u00b0F)<\/td>\n		This function sets the temperature units for measured values
\nto \u00b0C (Celsius) or \u00b0F (Fahrenheit).<\/td>\n		All models<\/td>\n<\/tr>\n
Decimal Point Position
\nSetting<\/td>\n		This function sets the number of digits to be displayed after
\nthe\u3000decimal point for INT type measured values and set point
\nparameters.<\/td>\n		All models<\/td>\n<\/tr>\n
Cold Junction
\nCompensation
\nEnable\/Disable Setting<\/td>\n		This function enables or disables cold junction compensation
\nusing the cold junction sensor that is mounted on the terminal
\nblock when a thermocouple input is used.<\/td>\n		All models<\/td>\n<\/tr>\n
Temperature Input
\nCorrection<\/td>\n		This function corrects measured values. When there are
\nvariations in the sensor or when there is a difference in
\nmeasured value from other measuring instruments. One-point
\ncorrection and two-point correction methods are provided.<\/td>\n		All models<\/td>\n<\/tr>\n
Input Digital Filter<\/td>\nThis function sets the time constant applied to the first-order
\nlag operation filter so that the noise components mixed with
\nthe measured value are eliminated.<\/td>\n		All models<\/td>\n<\/tr>\n
Measuring the Ambient
\nTemperature Around
\nTerminals<\/td>\n		This function measures the temperature around the terminals
\nof the Temperature Control Unit.<\/td>\n		All models<\/td>\n<\/tr>\n
Control
\nProcessing<\/td>\n		ON\/OFF control<\/td>\nThis control function uses a preset set point to turn off the
\ncontrol output when the temperature reaches the set point
\nduring control.<\/td>\n		All models<\/td>\n<\/tr>\n
PID control<\/td>\nPID control is a combination of proportional (P) control,
\nintegral\u3000(I) control, and differential (D) control. It is a control
\nfunction that feeds back the detected value to the set point
\nso that they conform to each other.<\/td>\n		All models<\/td>\n<\/tr>\n
Heating\/Cooling
\nControl<\/td>\n		This function controls both heating and cooling.<\/td>\nHeating\/cooling
\ncontrol type
\nmodels<\/td>\n<\/tr>\n
Run or Stop Controls<\/td>\nThis function starts and stops temperature control.<\/td>\nAll models<\/td>\n<\/tr>\n
Direct\/Reverse
\nOperation<\/td>\n		This function specifies direct or reverse operation.<\/td>\nAll models<\/td>\n<\/tr>\n
Manual MV (Manual
\nManipulated Variable)<\/td>\n		This function outputs the specified manipulated variable
\nduring PID control.<\/td>\n		All models<\/td>\n<\/tr>\n
MV at Error (error MV)<\/td>\nThis function outputs a fixed manipulated variable when a
\nSensor Disconnected Error occurs.<\/td>\n		All models<\/td>\n<\/tr>\n
MV Limit<\/td>\nThis function adds a limit to the manipulated variable
\ncalculated by PID control and outputs it.<\/td>\n		All models<\/td>\n<\/tr>\n
Load Rejection MV<\/td>\nThis function performs a preset output operation if the
\nTemperature Control Unit connected to the CPU Unit cannot
\nreceive the output setting values from the CPU Unit due to
\nan NX bus error or CPU watchdog timer error. This function
\nperforms a preset output operation if the Slave Terminal
\ncannot receive the output setting values due to a
\ncommunications error between the Temperature Control Unit
\nand the Communications Coupler Unit host or due to an error
\non the NX bus.<\/td>\n		All models<\/td>\n<\/tr>\n
MV Branch<\/td>\nThe manipulated variables calculated by the slope or offset
\nare output to the branch-destination channel based on the
\nmanipulated variables of the branch-source channel.<\/td>\n		Standard control
\ntype models<\/td>\n<\/tr>\n
Load Short-circuit
\nProtection<\/td>\n		This function protects output circuits of the Temperature
\nControl Unit when an external device connected to the
\ncontrol output is short-circuited.<\/td>\n		Models with
\nvoltage output
\n(for driving SSR)<\/td>\n<\/tr>\n
Tuning<\/td>\nAT (Autotuning)<\/td>\nThis is a tuning method that derives the PID constant. This
\nfunction automatically calculates the PID constant by the limit
\ncycle method according to the characteristics of the control
\ntarget.<\/td>\n		All models<\/td>\n<\/tr>\n
Automatic Filter
\nAdjustment<\/td>\n		This is a tuning method that automatically adjusts the input
\ndigital filter. This function is primarily for packing machines. It
\nsuppresses periodic temperature variations.<\/td>\n		Standard control
\ntype models<\/td>\n<\/tr>\n
Water-cooling Output
\nAdjustment<\/td>\n		This is a tuning method that automatically adjusts hunting.
\nThis function is primarily for water-cooled extruders. It
\nsuppresses temperature variations caused by the cooling
\nwater output.<\/td>\n		Heating\/cooling
\ncontrol type
\nmodels<\/td>\n<\/tr>\n
Adaptive Control<\/td>\nThis is a tuning method that can maintain high control
\nperformance by following system changes. This function
\nmaintains control performance even if temperature variation
\nfactors such as environmental change and equipment
\ndeterioration occur during a long-term equipment operation.<\/td>\n		Standard control
\ntype models<\/td>\n<\/tr>\n
Notifying the Update of
\nTuning Parameters<\/td>\n		This function notifies that the Temperature Control Unit has
\nautomatically updated the parameters by tuning.<\/td>\n		All models<\/td>\n<\/tr>\n
Control
\nOutput<\/td>\n		Control Period<\/td>\nThis function sets the period when the ON\/OFF time ratio is
\nchanged for voltage output (for driving SSR) in time-
\nproportional operation.<\/td>\n		Models with
\nvoltage output
\n(for driving SSR)<\/td>\n<\/tr>\n
Minimum Output
\nON\/OFF Band<\/td>\n		This function specifies the minimum ON\/OFF bands for the
\nheating side control output or the cooling side control output.
\nThis function can be used to prevent deterioration of
\nmechanical relays when mechanical relays are used in the
\nactuators connected to the output terminals.<\/td>\n		Models with
\nvoltage output
\n(for driving SSR)<\/td>\n<\/tr>\n
Output Signal Range
\nSetting<\/td>\n		This function sets the output signal range of the linear current
\noutput. You can specify 4 to 20 mA or 0 to 20 mA.<\/td>\n		Models with
\nlinear current
\noutput<\/td>\n<\/tr>\n
Limiting Simultaneous
\nOutputs<\/td>\n		This function limits the number of outputs that turn ON
\nsimultaneously by shifting the control period of each output
\nand restricting the upper limit of the manipulated variable. You
\ncan set a delay between outputs, which allows delays in
\noutput device operation that can occur when outputs are
\nswitched.<\/td>\n		Standard control
\ntype models with
\nvoltage output
\n(for driving SSR)<\/td>\n<\/tr>\n
Error
\nDetection<\/td>\n		Sensor Disconnection
\nDetection<\/td>\n		This function detects disconnections in temperature sensors.
\nIt also detects that the measured value of the temperature
\nsensor is outside the input indication range.<\/td>\n		All models<\/td>\n<\/tr>\n
Heater Burnout
\nDetection<\/td>\n		This function detects heater burnouts. A heater burnout is
\ndetected if the control output is ON and the heater current is
\nequal to or less than the heater burnout detection current.<\/td>\n		Models with CT
\ninput<\/td>\n<\/tr>\n
SSR Failure Detection<\/td>\nThis function detects SSR failures. An SSR failure is detected
\nif the control output is OFF and the leakage current is equal to
\nor greater than the SSR failure detection current. An SSR
\nfailure is a failure that is caused by an SSR short-circuit.<\/td>\n		Models with CT
\ninput<\/td>\n<\/tr>\n
Temperature alarms<\/td>\nFunction for detecting a deviation or an error in the measured
\nvalue as an alarm. Alarm operation corresponding to the use
\ncan be performed by selecting \u201cAlarm type\u201d.<\/td>\n		All models<\/td>\n<\/tr>\n
LBA (Loop Burnout
\nAlarm)<\/td>\n		Function for detecting, as an alarm, the error location in the
\ncontrol loop when there is no change in the measured value
\nwhile a control deviation equal to or more than the threshold
\nvalue exists between the set point and the measured value.<\/td>\n		All models<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Individual Specifications<\/h4>\n

Temperature Control Unit (2-Channel Type) NX-TC2405<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(2-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC2405<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n2 channels<\/td>\nControl type<\/strong><\/th>\nStandard control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (2 points per unit)
\n\u2022 CT Input: 1 point per channel
\n(2 points per unit)
\n\u2022 Control Output: 1 point per
\nchannel (2 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_3_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		0 to 0.125 A<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		Approx. 2.7 \u03a9<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		E54-CT1, E54-CT3,
\nE54-CT1L, and E54-CT3L<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		50 A AC<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1 A<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		\u00b15% (full scale) \u00b11 digit<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		\u00b12% (full scale) \u00b11 digit<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Voltage output for driving
\nSSR, 1 point per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n0.1, 0.2, 0.5, 1 to 99s<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		-5 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		21 mA\/point, 42 mA\/Unit<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		0.3 A\/point max., 10 ms max.<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *4<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		Provided<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 No isolation between internal
\ncircuits and CT inputs
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.45 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 1.10 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n75 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_3_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_3_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (2-Channel Type) NX-TC2406<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(2-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC2406<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n2 channels<\/td>\nControl type<\/strong><\/th>\nStandard control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (2 points per unit)
\n\u2022 CT input: None
\n\u2022 Control Output: 1 point per
\nchannel (2 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_4_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Voltage output for driving
\nSSR, 1 point per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n0.1, 0.2, 0.5, 1 to 99s<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		-5 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		21 mA\/point, 42 mA\/Unit<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		0.3 A\/point max., 10 ms max.<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *4<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		Provided<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.25 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 0.95 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n75 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_4_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_4_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (2-Channel Type) NX-TC2407<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(2-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC2407<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n2 channels<\/td>\nControl type<\/strong><\/th>\nHeating and cooling control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (2 points per unit)
\n\u2022 CT input: None
\n\u2022 Control Output: 2 point per
\nchannel (4 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_5_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Voltage output for driving
\nSSR, 2 point per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n0.1, 0.2, 0.5, 1 to 99s<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		\u2022 Heating: 0 to +105%
\n\u2022 Cooling: 0 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\nPlatinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		21 mA\/point, 84 mA\/Unit<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		0.3 A\/point max., 10 ms max.<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *4<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		Provided<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.30 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 1.00 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n75 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_5_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_5_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (2-Channel Type) NX-TC2408<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(2-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC2408<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n2 channels<\/td>\nControl type<\/strong><\/th>\nStandard control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (2 points per unit)
\n\u2022 CT input: None
\n\u2022 Control Output: 1 point per
\nchannel (2 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_6_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Linear current output, one
\noutput per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		-5 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n1\/10,000<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		350 \u03a9 or less, or greater than
\n350 \u03a9 but no more than 600
\n\u03a9 *4<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *5<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n0 to 20 mA, 4 to 20 mA<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		\u00b10.3% of full scale, but 1% of
\nfull scale at 0 to 4 mA of 0 to
\n20 mA range<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		\u00b10.3% (full scale)<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.25 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 0.95 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n75 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_6_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_6_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. To use an allowable load resistance greater than 350 \u03a9 but not exceeding 600 \u03a9, SHT1 and SHT2 must be shorted
\nwith a shorting cable.
\nFor details, refer to the NX-series Temperature Control Units User\u2019s Manual (Cat. No. W523).
\n*5. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (4-Channel Type) NX-TC3405<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(4-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC3405<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n4 channels<\/td>\nControl type<\/strong><\/th>\nStandard control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (4 points per unit)
\n\u2022 CT Input: 1 point per channel
\n(4 points per unit)
\n\u2022 Control Output: 1 point per
\nchannel (4 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals x 2)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_7_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		0 to 0.125 A<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		Approx. 2.7 \u03a9<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		E54-CT1, E54-CT3,
\nE54-CT1L, and E54-CT3L<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		50 A AC<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1 A<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		\u00b15% (full scale) \u00b11 digit<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		\u00b12% (full scale) \u00b11 digit<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Voltage output for driving
\nSSR, 1 point per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n0.1, 0.2, 0.5, 1 to 99s<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		-5 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		21 mA\/point, 84 mA\/Unit<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		0.3 A\/point max., 10 ms max.<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *4<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		Provided<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n24 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 No isolation between internal
\ncircuits and CT inputs
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.80 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 1.35 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n140 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_7_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_7_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nIn order to distinguish left and right terminal blocks, each terminal block has either a letter “L” (left side) or “R” (right
\nside) appended at the end of a calibration control number.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (4-Channel Type) NX-TC3406<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(4-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC3406<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n4 channels<\/td>\nControl type<\/strong><\/th>\nStandard control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (4 points per unit)
\n\u2022 CT input: None
\n\u2022 Control Output: 1 point per
\nchannel (4 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals x 2)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_8_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Voltage output for driving
\nSSR, 1 point per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n0.1, 0.2, 0.5, 1 to 99s<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		-5 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		21 mA\/point, 84 mA\/Unit<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		0.3 A\/point max., 10 ms max.<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *4<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		Provided<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n24 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.70 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 1.25 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n140 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_8_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_8_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nIn order to distinguish left and right terminal blocks, each terminal block has either a letter “L” (left side) or “R” (right
\nside) appended at the end of a calibration control number.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (4-Channel Type) NX-TC3407<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(4-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC3407<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n4 channels<\/td>\nControl type<\/strong><\/th>\nheating and cooling control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (4 points per unit)
\n\u2022 CT input: None
\n\u2022 Control Output: 2 point per
\nchannel (8 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals x 2)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_9_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Voltage output for driving
\nSSR, 2 point per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n0.1, 0.2, 0.5, 1 to 99s<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		\u2022 Heating: 0 to +105%
\n\u2022 Cooling: 0 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		21 mA\/point, 168 mA\/Unit<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		0.3 A\/point max., 10 ms max.<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *4<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		Provided<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n24 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.75 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 1.30 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n140 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_9_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_9_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nIn order to distinguish left and right terminal blocks, each terminal block has either a letter “L” (left side) or “R” (right
\nside) appended at the end of a calibration control number.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Temperature Control Unit (4-Channel Type) NX-TC3408<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTemperature Control Unit
\n(4-Channel Type)<\/td>\n		Model<\/strong><\/th>\nNX-TC3408<\/td>\n<\/tr>\n
Number of Channels<\/strong><\/th>\n4 channels<\/td>\nControl type<\/strong><\/th>\nStandard control<\/td>\n<\/tr>\n
Number of points per
\nchannel<\/strong><\/th>\n		\u2022 Temperature input: 1 point
\nper channel (4 points per unit)
\n\u2022 CT input: None
\n\u2022 Control Output: 1 point per
\nchannel (4 points per unit)<\/td>\n		External connection
\nterminal<\/strong><\/th>\n		Screwless clamping terminal
\nblock (16 terminals x 2)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run Refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output
\nindicators
\n\"3699_sp_10_1\"<\/td>\n		CT
\nInput
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Maximum
\nheater current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control
\nOutput
\nsection<\/strong><\/th>\n		Control output
\ntype and
\nnumber of
\ncontrol outputs
\nper channel<\/strong><\/th>\n		Linear current output, one
\noutput per channel<\/td>\n<\/tr>\n
Internal I\/O
\ncommon<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Control Period<\/strong><\/th>\n—<\/td>\n<\/tr>\n
Manipulated
\nvariable<\/strong><\/th>\n		-5 to +105%<\/td>\n<\/tr>\n
Sensor
\nInput
\nsection<\/strong><\/th>\n		Temperature
\nsensor *1<\/strong><\/th>\n		\u2022 Thermocouple input: K, J, T,
\nE, L, U, N, R, S, B, C\/W, PL II
\n\u2022 Platinum resistance
\nthermometer input: Pt100
\n(three-wire), JPt100 (three-
\nwire)<\/td>\n		Resolution<\/strong><\/th>\n1\/10,000<\/td>\n<\/tr>\n
Input
\nconversion
\nrange<\/strong><\/th>\n		\u00b120\u00b0C of the input range
\n*2<\/td>\n		Rated Voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Absolute
\nmaximum
\nrating<\/strong><\/th>\n		\u00b1130 mV<\/td>\nOperating Load
\nVoltage Range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Input
\nimpedance<\/strong><\/th>\n		20 k\u03a9 min.<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1\u00b0C max.<\/td>\nMaximum
\nInrush Current<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Reference
\naccuracy<\/strong><\/th>\n		*3<\/td>\nAllowable load
\nresistance<\/strong><\/th>\n		350 \u03a9 or less, or greater than
\n350 \u03a9 but no more than 600
\n\u03a9 *4<\/td>\n<\/tr>\n
Temperature
\ncoefficient<\/strong><\/th>\n		*3<\/td>\nLeakage
\ncurrent<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Cold junction
\ncompensation
\nerror<\/strong><\/th>\n		\u00b11.2\u00b0C *3 *5<\/td>\nResidual
\nvoltage<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\ndisconnection
\ndetection
\ncurrent<\/strong><\/th>\n		Approx. 0.1 uA<\/td>\nLoad Short-
\ncircuit
\nProtection<\/strong><\/th>\n		—<\/td>\n<\/tr>\n
Input
\ndetection
\ncurrent<\/strong><\/th>\n		0.25 mA<\/td>\nOutput range<\/strong><\/th>\n0 to 20 mA, 4 to 20 mA<\/td>\n<\/tr>\n
Effect of
\nconductor
\nresistance<\/strong><\/th>\n		\u2022 Thermocouple input: 0.1\u00b0C\/
\n\u03a9 (100 \u03a9 or less per
\nconductor)
\n\u2022 Platinum resistance
\nthermometer input: 0.06\u00b0C\/
\n\u03a9 (20 \u03a9 or less per
\nconductor)<\/td>\n		Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		\u00b10.3% of full scale, but 1% of
\nfull scale at 0 to 4 mA of 0 to
\n20 mA range<\/td>\n<\/tr>\n
Warm-up
\nperiod<\/strong><\/th>\n		30 minutes<\/td>\nInfluence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		\u00b10.3% (full scale)<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		50 ms\/Unit<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n24 mm (W) \u00d7100 mm (H) \u00d7
\n71 mm (D)<\/td>\n		Isolation method<\/strong><\/th>\n\u2022 Between sensor inputs and
\ninternal circuitry: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between inputs: Power =
\nTransformer, Signal = Digital
\nisolator
\n\u2022 Between control output and
\ninternal circuit: Photocoupler
\n\u2022 No isolation between control
\noutputs<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute with a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent capacity of I\/O
\npower supply terminals<\/strong><\/th>\n		IOG: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.65 W max.
\n\u2022 Connected to
\nCommunications Coupler
\nUnit 1.25 W max.<\/td>\n		Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n140 g max.<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3699_sp_10_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Mounting orientation:
\n\u2022 Connect to CPU unit
\nFront mounting orientation is possible
\n\u2022 Connect to communication coupler unit
\nSix orientations are possible<\/p>\n

Limitation:
\nThe cold junction compensation error is limited by the mounting orientation and the type or
\npower consumption of the adjacent unit. For details, refer to Cold Junction Compensation
\nError Specifications for Units That Take a Thermocouple Input Type.<\/td>\n<\/tr>\n

Terminal connection
\ndiagram<\/strong><\/th>\n		\"3699_sp_10_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the setting ranges and indication ranges of the sensors, refer to the Input types.
\n*2. + 20\u00b0C only for the following input type settings:
\n1: JPt100
\n3: JPt100
\n10: T
\n14: U
\n*3. For details, refer to the Reference Accuracy and Temperature Coefficient Table.
\nFor thermocouple inputs, reference accuracy and cold junction compensation error are guaranteed for a set of a
\nTemperature Control Unit and a terminal block on which a cold junction sensor is mounted.
\nBe sure to use the terminal block and the Temperature Control Unit with the same calibration control number
\ntogether.
\nA calibration control number is displayed both on the terminal block and the Unit.
\nIn order to distinguish left and right terminal blocks, each terminal block has either a letter “L” (left side) or “R” (right
\nside) appended at the end of a calibration control number.
\nMake sure to return the terminal block to which a cold junction sensor is mounted and the Unit together.
\n*4. To use an allowable load resistance greater than 350 \u03a9 but not exceeding 600 \u03a9, either SHT1 and SHT2, or SHT3 and
\nSHT4 must be shorted with a shorting cable.
\nFor details, refer to the NX-series Temperature Control Units User\u2019s Manual (Cat. No. W523).
\n*5. For details, refer to Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type.<\/div>\n<\/div>\n<\/div>\n

Input types<\/h4>\n
\n
\n

The settings are shown in the following table.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n
Setting name *1<\/strong><\/th>\nDisplay of
\nsupport software<\/strong><\/th>\n		Description<\/strong><\/th>\nDefault<\/strong><\/th>\nSetting
\nrange<\/strong><\/th>\n		Unit<\/strong><\/th>\nChange
\napplication timing<\/strong><\/th>\n<\/tr>\n
Ch[] input type<\/td>\nCh[] Input Type<\/td>\nSets the input type of
\nsensors connected to
\ntemperature input.<\/td>\n		5: K -200 to
\n1300\u00b0C<\/td>\n		*2<\/td>\nNo<\/td>\nAfter unit restart<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

*1.[] represents the channel number.
\n*2. The setting range is as follows:<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Set
\nvalues<\/strong><\/th>\n		Input types<\/strong><\/th>\nInput indication range<\/strong><\/th>\nRemarks<\/strong><\/th>\n<\/tr>\n
Sensor<\/strong><\/th>\nInput setting range<\/strong><\/th>\n<\/tr>\n
0<\/td>\nPt100<\/td>\n-200 to 850\u00b0C\/-300 to 1500\u00b0F<\/td>\n-220 to 870\u00b0C\/-340 to 1540\u00b0F<\/td>\nResistance
\nthermometer<\/td>\n<\/tr>\n
1<\/td>\nPt100<\/td>\n-199.9 to 500.0\u00b0C\/-199.9 to 900.0\u00b0F<\/td>\n-219.9 to 520.0\u00b0C\/-239.9 to 940.0\u00b0F<\/td>\n<\/tr>\n
2<\/td>\nPt100<\/td>\n-0.0 to 100.0\u00b0C\/0.0 to 210.0\u00b0F<\/td>\n-20.0 to 120.0\u00b0C\/-40.0 to 250.0\u00b0F<\/td>\n<\/tr>\n
3<\/td>\nJPt100<\/td>\n-199.9 to 500.0\u00b0C\/-199.9 to 900.0\u00b0F<\/td>\n-219.9 to 520.0\u00b0C\/-239.9 to 940.0\u00b0F<\/td>\n<\/tr>\n
4<\/td>\nJPt100<\/td>\n-0.0 to 100.0\u00b0C\/0.0 to 210.0\u00b0F<\/td>\n-20.0 to 120.0\u00b0C\/-40.0 to 250.0\u00b0F<\/td>\n<\/tr>\n
5<\/td>\nK<\/td>\n-200 to 1300\u00b0C\/-300 to 2300\u00b0F<\/td>\n-220 to 1320\u00b0C\/-340 to 2340\u00b0F<\/td>\nThermocouple<\/td>\n<\/tr>\n
6<\/td>\nK<\/td>\n-20.0 to 500.0\u00b0C\/0.0 to 900.0\u00b0F<\/td>\n-40.0 to 520.0\u00b0C\/-40.0 to 940.0\u00b0F<\/td>\n<\/tr>\n
7<\/td>\nJ<\/td>\n-100 to 850\u00b0C\/-100.0 to 1500\u00b0F<\/td>\n-120 to 870\u00b0C\/-140 to 1540\u00b0F<\/td>\n<\/tr>\n
8<\/td>\nJ<\/td>\n-20.0 to 400.0\u00b0C\/0.0 to 750.0\u00b0F<\/td>\n-40.0 to 420.0\u00b0C\/-40.0 to 790.0\u00b0F<\/td>\n<\/tr>\n
9<\/td>\nT<\/td>\n-200 to 400\u00b0C\/-300 to 700\u00b0F<\/td>\n-220 to 420\u00b0C\/-340 to 740\u00b0F<\/td>\n<\/tr>\n
10<\/td>\nT<\/td>\n-199.9 to 400.0\u00b0C\/-199.9 to 700.0\u00b0F<\/td>\n-219.9 to 420.0\u00b0C\/-239.9 to 740\u00b0F<\/td>\n<\/tr>\n
11<\/td>\nE<\/td>\n-200 to 600\u00b0C\/-300 to 1100\u00b0F<\/td>\n-220 to 620\u00b0C\/-340 to 1140\u00b0F<\/td>\n<\/tr>\n
12<\/td>\nL<\/td>\n-100 to 850\u00b0C\/-100 to 1500\u00b0F<\/td>\n-120 to 870\u00b0C\/-140 to 1540\u00b0F<\/td>\n<\/tr>\n
13<\/td>\nU<\/td>\n-200 to 400\u00b0C\/-300 to 700\u00b0F<\/td>\n-220 to 420\u00b0C\/-340 to 740\u00b0F<\/td>\n<\/tr>\n
14<\/td>\nU<\/td>\n-199.9 to 400.0\u00b0C\/-199.9 to 700.0\u00b0F<\/td>\n-219.9 to 420.0\u00b0C\/-239.9 to 740\u00b0F<\/td>\n<\/tr>\n
15<\/td>\nN<\/td>\n-200 to 1300\u00b0C\/-300 to 2300\u00b0F<\/td>\n-220 to 1320\u00b0C\/-340 to 2340\u00b0F<\/td>\n<\/tr>\n
16<\/td>\nR<\/td>\n0 to 1700\u00b0C\/0 to 3000\u00b0F<\/td>\n-20 to 1720\u00b0C\/-40 to 3040\u00b0F<\/td>\n<\/tr>\n
17<\/td>\nS<\/td>\n0 to 1700\u00b0C\/0 to 3000\u00b0F<\/td>\n-20 to 1720\u00b0C\/-40 to 3040\u00b0F<\/td>\n<\/tr>\n
18<\/td>\nB<\/td>\n0 to 1800\u00b0C\/0 to 3200\u00b0F<\/td>\n-20 to 1820\u00b0C\/-40 to 3240\u00b0F<\/td>\n<\/tr>\n
19<\/td>\nC\/W<\/td>\n0 to 2300\u00b0C\/0 to 3200\u00b0F<\/td>\n-20 to 2320\u00b0C\/-40 to 3240\u00b0F<\/td>\n<\/tr>\n
20<\/td>\nPLII<\/td>\n0 to 1300\u00b0C\/0 to 2300\u00b0F<\/td>\n-20 to 1320\u00b0C\/-40 to 2340\u00b0F<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Reference Accuracy and Temperature Coefficient Table<\/h4>\n
\n
\n

Reference accuracies and temperature coefficients are shown below by input type and measurement temperature.
\nTo convert the temperature unit from Celsius to Fahrenheit, use the following equation.
\nFahrenheit temperature (\u00b0F) = Celsius temperature (\u00b0C) x 1.8 + 32<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Set
\nvalues<\/strong><\/th>\n		Input type<\/strong><\/th>\nMeasurement
\ntemperature (\u00b0C)<\/strong><\/th>\n		Reference
\naccuracy \u00b0C (%)
\n*2<\/strong><\/th>\n		Temperature coefficient
\n\u00b0C\/\u00b0C *3
\n(ppm\/\u00b0C *4)<\/strong><\/th>\n<\/tr>\n
Sensor<\/strong><\/th>\nTemperature
\nrange (\u00b0C) *1<\/strong><\/th>\n<\/tr>\n
0<\/td>\nPt100<\/td>\n-200 to 850<\/td>\n-200 to 300<\/td>\n\u00b11.0 (\u00b10.1%)<\/td>\n\u00b10.1 (\u00b1100 ppm\/\u00b0C)<\/td>\n<\/tr>\n
300 to 700<\/td>\n\u00b12.0 (\u00b10.2%)<\/td>\n\u00b10.2 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
700 to 850<\/td>\n\u00b12.5 (\u00b10.25%)<\/td>\n\u00b10.25 (\u00b1250 ppm\/\u00b0C)<\/td>\n<\/tr>\n
1<\/td>\nPt100<\/td>\n-199.9 to 500.0<\/td>\n-199.9 to 300.0<\/td>\n\u00b10.8 (\u00b10.12%)<\/td>\n\u00b10.1 (\u00b1150 ppm\/\u00b0C)<\/td>\n<\/tr>\n
300.0 to 500.0<\/td>\n\u00b10.8 (\u00b10.12%)<\/td>\n\u00b10.2 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
2<\/td>\nPt100<\/td>\n0.0 to 100.0<\/td>\n0.0 to 100.0<\/td>\n\u00b10.8 (\u00b10.8%)<\/td>\n\u00b10.1 (\u00b11000 ppm\/\u00b0C)<\/td>\n<\/tr>\n
3<\/td>\nJPt100<\/td>\n-199.9 to 500.0<\/td>\n-199.9 to 300.0<\/td>\n\u00b10.8 (\u00b10.12%)<\/td>\n\u00b10.1 (\u00b1150 ppm\/\u00b0C)<\/td>\n<\/tr>\n
300.0 to 500.0<\/td>\n\u00b10.8 (\u00b10.12%)<\/td>\n\u00b10.2 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
4<\/td>\nJPt100<\/td>\n0.0 to 100.0<\/td>\n0.0 to 100.0<\/td>\n\u00b10.8 (\u00b10.8%)<\/td>\n\u00b10.1 (\u00b11000 ppm\/\u00b0C)<\/td>\n<\/tr>\n
5<\/td>\nK<\/td>\n-200 to 1300<\/td>\n-200 to -100<\/td>\n\u00b11.5 (\u00b10.1%)<\/td>\n\u00b10.15 (\u00b1100 ppm\/\u00b0C)<\/td>\n<\/tr>\n
-100 to 400<\/td>\n\u00b10.30 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
400 to 1300<\/td>\n\u00b10.38 (\u00b1250 ppm\/\u00b0C)<\/td>\n<\/tr>\n
6<\/td>\nK<\/td>\n-20.0 to 500.0<\/td>\n-20.0 to 400.0<\/td>\n\u00b11.0 (\u00b10.2%)<\/td>\n\u00b10.30 (\u00b1600 ppm\/\u00b0C)<\/td>\n<\/tr>\n
400.0 to 500.0<\/td>\n\u00b10.38 (\u00b1760 ppm\/\u00b0C)<\/td>\n<\/tr>\n
7<\/td>\nJ<\/td>\n-100 to 850<\/td>\n-100 to 400<\/td>\n\u00b11.4 (\u00b10.15%)<\/td>\n\u00b10.14 (\u00b1150 ppm\/\u00b0C)<\/td>\n<\/tr>\n
400 to 850<\/td>\n\u00b11.2 (\u00b10.13%)<\/td>\n\u00b10.28 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
8<\/td>\nJ<\/td>\n-20.0 to 400.0<\/td>\n-20.0 to 400.0<\/td>\n\u00b11.0 (\u00b10.24%)<\/td>\n\u00b10.14 (\u00b1350 ppm\/\u00b0C)<\/td>\n<\/tr>\n
9<\/td>\nT<\/td>\n-200 to 400<\/td>\n-200 to -100<\/td>\n\u00b11.2 (\u00b10.2%)<\/td>\n\u00b10.30 (\u00b1500 ppm\/\u00b0C)<\/td>\n<\/tr>\n
-100 to 400<\/td>\n\u00b10.12 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
10<\/td>\nT<\/td>\n-199.9 to 400.0<\/td>\n-199.9 to -100.0<\/td>\n\u00b11.2 (\u00b10.2%)<\/td>\n\u00b10.30 (\u00b1500 ppm\/\u00b0C)<\/td>\n<\/tr>\n
-100.0 to 400.0<\/td>\n\u00b10.12 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
11<\/td>\nE<\/td>\n-200 to 600<\/td>\n-200 to 400<\/td>\n\u00b11.2 (\u00b10.15%)<\/td>\n\u00b10.12 (\u00b1150 ppm\/\u00b0C)<\/td>\n<\/tr>\n
400 to 600<\/td>\n\u00b12.0 (\u00b10.25%)<\/td>\n\u00b10.24 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
12<\/td>\nL<\/td>\n-100 to 850<\/td>\n-100 to 300<\/td>\n\u00b11.1 (\u00b10.12%)<\/td>\n\u00b10.11 (\u00b1120 ppm\/\u00b0C)<\/td>\n<\/tr>\n
300 to 700<\/td>\n\u00b12.2 (\u00b10.24%)<\/td>\n\u00b10.22 (\u00b1240 ppm\/\u00b0C)<\/td>\n<\/tr>\n
700 to 850<\/td>\n\u00b10.28 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
13<\/td>\nU<\/td>\n-200 to 400<\/td>\n-200 to 400<\/td>\n\u00b11.2 (\u00b10.2%)<\/td>\n\u00b10.12 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
14<\/td>\nU<\/td>\n-199.9 to 400.0<\/td>\n-199.9 to 400.0<\/td>\n\u00b11.2 (\u00b10.2%)<\/td>\n\u00b10.12 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
15<\/td>\nN<\/td>\n-200 to 1300<\/td>\n-200 to 400<\/td>\n\u00b11.5 (\u00b10.1%)<\/td>\n\u00b10.30 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
400 to 1000<\/td>\n<\/tr>\n
1000 to 1300<\/td>\n\u00b10.38 (\u00b1250 ppm\/\u00b0C)<\/td>\n<\/tr>\n
16<\/td>\nR<\/td>\n0 to 1700<\/td>\n0 to 500<\/td>\n\u00b11.75 (\u00b10.11%)<\/td>\n\u00b10.44 (\u00b1260 ppm\/\u00b0C)<\/td>\n<\/tr>\n
500 to 1200<\/td>\n\u00b12.5 (\u00b10.15%)<\/td>\n<\/tr>\n
1200 to 1700<\/td>\n<\/tr>\n
17<\/td>\nS<\/td>\n0 to 1700<\/td>\n0 to 1700<\/td>\n\u00b12.5 (\u00b10.15%)<\/td>\n\u00b10.44 (\u00b1260 ppm\/\u00b0C)<\/td>\n<\/tr>\n
18<\/td>\nB<\/td>\n0 to 1800<\/td>\n0 to 400<\/td>\nReference accuracy
\ncannot be guaranteed<\/td>\n		Reference accuracy
\ncannot be guaranteed<\/td>\n<\/tr>\n
400 to 1200<\/td>\n\u00b13.6 (\u00b10.2%)<\/td>\n\u00b10.45 (\u00b1250 ppm\/\u00b0C)<\/td>\n<\/tr>\n
1200 to 1800<\/td>\n\u00b15.0 (\u00b10.28%)<\/td>\n\u00b10.54 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
19<\/td>\nC\/W<\/td>\n0 to 2300<\/td>\n0 to 300<\/td>\n\u00b11.15 (\u00b10.05%)<\/td>\n\u00b10.46 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
300 to 800<\/td>\n\u00b12.3 (\u00b10.1%)<\/td>\n<\/tr>\n
800 to 1500<\/td>\n\u00b13.0 (\u00b10.13%)<\/td>\n<\/tr>\n
1500 to 2300<\/td>\n\u00b10.691 (\u00b1300 ppm\/\u00b0C)<\/td>\n<\/tr>\n
20<\/td>\nPL II<\/td>\n0 to 1300<\/td>\n0 to 400<\/td>\n\u00b11.3 (\u00b10.1%)<\/td>\n\u00b10.23 (\u00b1200 ppm\/\u00b0C)<\/td>\n<\/tr>\n
400 to 800<\/td>\n\u00b12.0 (\u00b10.15%)<\/td>\n\u00b10.39 (\u00b1300 ppm\/\u00b0C<\/td>\n<\/tr>\n
800 to 1300<\/td>\n\u00b10.65 (\u00b1500 ppm\/\u00b0C)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The decimal point position of the various input types is “no decimal point” or “decimal point 1 digit”. When calculating
\nmeasured value error, round up calculation results in accordance with the decimal point position of the temperature
\nrange.
\n*2. The overall accuracy of the Temperature Control Unit is guaranteed for a set consisting of a cold junction sensor that
\nis mounted on the terminal block and a Temperature Control Unit. Be sure to use the terminal block and Temperature
\nControl Unit with the same calibration control number together. For the 24mm width model, also be sure the left and
\nright terminal blocks are correctly attached.<\/div>\n<\/div>\n
\"NX-TC<\/div>\n<\/div>\n
\n
\n
*3. An error for a measured value when the ambient temperature changes by 1\u00b0C.
\nThe following formula is used to calculate the error of the measured value for thermocouple inputs..
\nOverall accuracy = Reference accuracy + Temperature characteristic x Change in the ambient temperature + Cold
\njunction compensation error For resistance thermometer inputs, there is no cold junction compensation error.
\n(Calculation example)<\/div>\n<\/div>\n<\/div>\n

Conditions<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Item<\/strong><\/th>\nDescription<\/strong><\/th>\n<\/tr>\n
Ambient temperature<\/td>\n30\u00b0C<\/td>\n<\/tr>\n
Measured value<\/td>\n100\u00b0C<\/td>\n<\/tr>\n
Thermocouple<\/td>\nK: -200 to 1300\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

The characteristic values are formulated from the datasheet or reference accuracy and temperature coefficient table under the above conditions<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nDescription<\/strong><\/th>\n<\/tr>\n
Reference accuracy<\/td>\n-100 to 400\u00b0C: \u00b11.5\u00b0C<\/td>\n<\/tr>\n
Temperature coefficient<\/td>\n-100 to 400\u00b0C: \u00b10.30\u00b0C\/\u00b0C<\/td>\n<\/tr>\n
Change in the ambient temperature<\/td>\n25\u00b0C -> 30\u00b0C 5 deg<\/td>\n<\/tr>\n
Cold junction compensation error<\/td>\n\u00b11.2\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Therefore,
\nOverall accuracy = Reference accuracy + Temperature characteristic x Change in the ambient temperature +
\nCold junction compensation error
\n= \u00b11.5\u00b0C +(\u00b10.30\u00b0C\/\u00b0C) x 5 deg + \u00b11.2\u00b0C
\n= \u00b14.2\u00b0C
\n-200 to 1300\u00b0C without decimal point. the calculation result is round up after the decimal point.
\nThen the overall accuracy is \u00b15\u00b0C.<\/p>\n

*4. The ppm value is for the full scale of the temperature range.<\/p><\/div>\n<\/div>\n<\/div>\n

Cold Junction Compensation Error Specifications for Units That Take a Thermocouple Input Type<\/h4>\n
\n
\n

This section describes the cold junction compensation errors for thermocouple inputs, which differ by installation orientation of this Unit, type of adjacent Units, and current consumed by the adjacent Units.<\/p>\n<\/div>\n<\/div>\n

When the Adjacent Units are Temperature Control Units<\/h4>\n
\n
\n

This section describes the cold junction compensation errors when the adjacent Units are Temperature Control Units. The error differs by installation orientation.<\/p>\n<\/div>\n<\/div>\n

(a) For upright installation<\/h4>\n
\n
\n

The cold junction compensation error is \u00b11.2\u00b0C.
\nHowever, there are exceptions depending on the input type and temperature. Those conditions and the cold junction compensation error are as in the table below.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n
Input type and temperature range<\/strong><\/th>\nCold junction compensation error<\/strong><\/th>\n<\/tr>\n
T below -90\u00b0C<\/td>\n\u00b13.0\u00b0C<\/td>\n<\/tr>\n
J, E, K and N below -100\u00b0C<\/td>\n<\/tr>\n
U, L and PLII<\/td>\n<\/tr>\n
R and S below 200\u00b0C<\/td>\n<\/tr>\n
B below 400\u00b0C<\/td>\nNot guaranteed<\/td>\n<\/tr>\n
C\/W<\/td>\n\u00b13.0\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

(b) For other than upright installation<\/h4>\n
\n
\n

The cold junction compensation error is \u00b14.0\u00b0C.
\nHowever, there are exceptions depending on the input type and temperature. Those conditions and the cold junction compensation error are as in the table below.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n
Input type and temperature range<\/strong><\/th>\nCold junction compensation error<\/strong><\/th>\n<\/tr>\n
T below -90\u00b0C<\/td>\n\u00b17.0\u00b0C<\/td>\n<\/tr>\n
J, E, K and N below -100\u00b0C<\/td>\n<\/tr>\n
U, L and PLII<\/td>\n<\/tr>\n
R and S below 200\u00b0C<\/td>\n<\/tr>\n
B below 400\u00b0C<\/td>\nNot guaranteed<\/td>\n<\/tr>\n
C\/W<\/td>\n\u00b19.0\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

When the Adjacent Units are not Temperature Control Units<\/h4>\n
\n
\n

This section describes the cold junction compensation errors when the adjacent Units are not Temperature Control Units. The error differs by the installation orientation and power consumption by the adjacent Units.<\/p>\n<\/div>\n<\/div>\n

(a) For upright installation, when the power consumption is 1.5 W or less for both the left and right adjacent Units<\/h4>\n
\n
\n

The cold junction compensation error is \u00b11.2\u00b0C.
\nHowever, there are exceptions depending on the input type and temperature. Those conditions and the cold junction compensation error are as in the table below.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n
Input type and temperature range<\/strong><\/th>\nCold junction compensation error<\/strong><\/th>\n<\/tr>\n
T below -90\u00b0C<\/td>\n\u00b13.0\u00b0C<\/td>\n<\/tr>\n
J, E, K and N below -100\u00b0C<\/td>\n<\/tr>\n
U, L and PLII<\/td>\n<\/tr>\n
R and S below 200\u00b0C<\/td>\n<\/tr>\n
B below 400\u00b0C<\/td>\nNot guaranteed<\/td>\n<\/tr>\n
C\/W<\/td>\n\u00b13.0\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
(b) When the power consumption of either the left or the right adjacent Unit is more than 1.5 W but less than 3.9 W.
\nOr for any installation other than upright, when the power consumption of both the left and right adjacent Units is
\nless than 3.9 W<\/strong><\/div>\n<\/div>\n<\/div>\n
\n
\n

The cold junction compensation error is \u00b14.0\u00b0C.
\nHowever, there are exceptions depending on the input type and temperature. Those conditions and the cold junction compensation error are as in the table below.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n
Input type and temperature range<\/strong><\/th>\nCold junction compensation error<\/strong><\/th>\n<\/tr>\n
T below -90\u00b0C<\/td>\n\u00b17.0\u00b0C<\/td>\n<\/tr>\n
J, E, K and N below -100\u00b0C<\/td>\n<\/tr>\n
U, L and PLII<\/td>\n<\/tr>\n
R and S below 200\u00b0C<\/td>\n<\/tr>\n
B below 400\u00b0C<\/td>\nNot guaranteed<\/td>\n<\/tr>\n
C\/W<\/td>\n\u00b19.0\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

(c) When the power consumption exceeds 3.9 W for either the left or right adjacent Unit<\/h4>\n
\n
\n

Do not use the above condition (c) because the cold junction compensation error is not guaranteed in this condition.<\/p>\n<\/div>\n<\/div>\n

(d) The power consumption of adjacent Units<\/h4>\n
\n
\n

The power consumption of adjacent Units is the total of the following values.
\n\u2022 The power consumption of the NX Unit power supply and I\/O power supply for the NX Units adjacent to the Temperature Input Unit. If the adjacent Unit is an Input Unit, it is the total power consumption according to the input current.<\/p>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n

Connected to a CPU Unit<\/h4>\n
\n
\n

Refer to the user’s manual for the CPU Unit for details on the CPU Units to which NX Units can be connected.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding version *1<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit Version<\/strong><\/th>\nCPU Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-TC2405<\/td>\nVer.1.0<\/td>\nVer. 1.13<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC2406<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC2407<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC2408<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC3405<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC3406<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC3407<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n
NX-TC3408<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user’s manuals for the
\nspecific Units for the relation between models and versions.<\/div>\n<\/div>\n<\/div>\n

Connected to a Communications EtherCAT Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding version *1<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit Version<\/strong><\/th>\nEtherCAT Coupler Unit<\/strong><\/th>\nCPU Unit or Industrial PC<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-TC2405<\/td>\nVer.1.0<\/td>\nVer.1.0 *2<\/td>\nVer. 1.05<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC2406<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC2407<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC2408<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC3405<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC3406<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC3407<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
NX-TC3408<\/td>\nVer.1.0<\/td>\nVer. 1.21<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer. 1.22<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.
\n*2. When you connect the Unit to a master of other manufacturer, use an EtherCAT Coupler Unit with unit version 1.5 or later.<\/div>\n<\/div>\n<\/div>\n

Connected to a Communications EtherNet\/IP Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding version*1<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit
\nVersion<\/strong><\/th>\n		Application with an NJ\/NX\/NY-series
\nController *2<\/strong><\/th>\n		Application with an CS\/CJ\/CP-series
\nPLC *3<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		NX-IO
\nConfigurator<\/strong><\/th>\n<\/tr>\n
NX-TC2405<\/td>\nVer.1.0<\/td>\nVer.1.2<\/td>\nVer.1.14<\/td>\nVer.1.21<\/td>\nVer. 1.2<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC2406<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC2407<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC2408<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC3405<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC3406<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC3407<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n
NX-TC3408<\/td>\nVer.1.0<\/td>\nVer.1.21<\/td>\nVer.1.21<\/td>\nVer.1.11<\/td>\n<\/tr>\n
Ver.1.1<\/td>\nVer.1.22<\/td>\nVer.1.22<\/td>\nVer.1.12<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user’s manuals for the
\nspecific Units for the relation between models and versions.
\n*2. Refer to the user’s manual of the EtherNet\/IP Coupler Unit for the unit versions of EtherNet\/IP Units corresponding to
\nEtherNet\/IP Coupler Units.
\n*3. Refer to the user’s manual of the EtherNet\/IP Coupler Unit for the unit versions of CPU Units and EtherNet\/IP Units
\ncorresponding to EtherNet\/IP Coupler Units.<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n
\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

Temperature Control Unit<\/h4>\n
\n
\n

NX-TC2405\/2406\/2407\/2408 (2 Ch type)
\n12 mm Width<\/strong><\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n
\n
\n

NX-TC3405\/3406\/3407\/3408 (4 Ch type)
\n24 mm Width<\/strong><\/p>\n<\/div>\n

\"NX-TC<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-TC Data Sheet<\/a><\/td>\nH229-E1-02
\n[4502KB]<\/span><\/td>\n		Nov 15, 2018<\/td>\n<\/tr>\n
\"\"\u00a0E5[]D\/NX-TC Catalog<\/a><\/td>\nH222-E1-03
\n[8641KB]<\/span><\/td>\n		May 07, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Optimize Control by Detecting Status Changes Easily Satisfy Both Productivity and Quality<\/h2>\n","protected":false},"featured_media":1345,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[98,63,72],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1380"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1380"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1345"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1380"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1380"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1380"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}