{"id":1379,"date":"2019-01-02T02:21:27","date_gmt":"2019-01-02T02:21:27","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1379"},"modified":"2019-01-02T02:21:31","modified_gmt":"2019-01-02T02:21:31","slug":"nx-ad-da-2","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/nx-ad-da-2\/","title":{"rendered":"NX-AD \/ DA"},"content":{"rendered":"
\n
\n

\u2022 Up to eight analog inputs per unit (NX-AD)<\/p>\n

\u2022 Up to four analog outputs per unit (NX-DA)<\/p>\n

\u2022 Free-run refreshing or synchronous I\/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit<\/p>\n

\u2022 Sampling times down to 10 \u03bcs per channel and high resolution of 1\/30,000<\/p>\n

\u2022 Single-ended or differential input (NX-AD)<\/p>\n

\u2022 Selecting channel to use, moving average, input disconnection detection, over range\/under range detection, and user calibration<\/p>\n

\u2022 Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance<\/p>\n

\u2022 Compact with a width of 12 mm per unit<\/p>\n

\u2022 Connect to the CJ PLC using the EtherNet\/IPTM<\/sup>\u00a0bus coupler<\/p>\n<\/div>\n<\/div>\n

\n
\n

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
\nEtherCAT\u00ae is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
\nEtherNet\/IPTM<\/sup>\u00a0is a trademark of ODVA.
\nOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

Applicable standards<\/h4>\n
\n
\n

Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Analog Input Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Num-
\nber
\nof
\npoints<\/strong><\/th>\n		Input
\nrange<\/strong><\/th>\n		Reso-
\nlution<\/strong><\/th>\n		Conver-
\nsion
\nvalue,
\ndecimal
\nnumber
\n(0 to
\n100%)<\/strong><\/th>\n		Over all
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		Input
\nmethod<\/strong><\/th>\n		Con-
\nver-
\nsion
\ntime<\/strong><\/th>\n		Input
\nimpe-
\ndance<\/strong><\/th>\n		I\/O
\nrefre-
\nshing
\nmethod<\/strong><\/th>\n<\/tr>\n
Voltage
\nInput
\ntype
\n\"3187_lu_1_1\"<\/strong><\/th>\n		2
\npoints<\/td>\n		-10 to
\n+10 V<\/td>\n		1\/8000<\/td>\n-4000 to
\n4000<\/td>\n		\u00b10.2%
\n(full
\nscale)<\/td>\n		Single-
\nended input<\/td>\n		250
\n\u03bcs\/
\npoint<\/td>\n		1 M\u03a9
\nmin.<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-AD2603<\/strong><\/td>\n<\/tr>\n
Differential
\nInput<\/td>\n		NX-AD2604<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n-15000
\nto 15000<\/td>\n		\u00b10.1%
\n(full
\nscale)<\/td>\n		Differential
\nInput<\/td>\n		10
\n\u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-AD2608<\/strong><\/td>\n<\/tr>\n
4
\npoints<\/td>\n		1\/8000<\/td>\n-4000 to
\n4000<\/td>\n		\u00b10.2%
\n(full
\nscale)<\/td>\n		Single-
\nended input<\/td>\n		250
\n\u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-AD3603<\/strong><\/td>\n<\/tr>\n
Differential
\nInput<\/td>\n		NX-AD3604<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n-15000
\nto 15000<\/td>\n		\u00b10.1%
\n(full
\nscale)<\/td>\n		Differential
\nInput<\/td>\n		10
\n\u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-AD3608<\/strong><\/td>\n<\/tr>\n
8
\npoints<\/td>\n		1\/8000<\/td>\n-4000 to
\n4000<\/td>\n		\u00b10.2%
\n(full
\nscale)<\/td>\n		Single-
\nended input<\/td>\n		250
\n\u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-AD4603<\/strong><\/td>\n<\/tr>\n
Differential
\nInput<\/td>\n		NX-AD4604<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n-15000
\nto 15000<\/td>\n		\u00b10.1%
\n(full
\nscale)<\/td>\n		Differential
\nInput<\/td>\n		10
\n\u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-AD4608<\/strong><\/td>\n<\/tr>\n
Current
\nInput
\ntype
\n\"3187_lu_1_2\"<\/strong><\/th>\n		2
\npoints<\/td>\n		4 to
\n20 mA<\/td>\n		1\/8000<\/td>\n0 to 8000<\/td>\n\u00b10.2%
\n(full
\nscale)<\/td>\n		Single-
\nended input<\/td>\n		250
\n\u03bcs\/
\npoint<\/td>\n		250 \u03a9<\/td>\nFree-Run
\nrefreshing<\/td>\n		NX-AD2203<\/strong><\/td>\n<\/tr>\n
Differential
\nInput<\/td>\n		NX-AD2204<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n0 to
\n30000<\/td>\n		\u00b10.1%
\n(full
\nscale)<\/td>\n		Differential
\nInput<\/td>\n		10
\n\u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-AD2208<\/strong><\/td>\n<\/tr>\n
4
\npoints<\/td>\n		1\/8000<\/td>\n0 to 8000<\/td>\n\u00b10.2%
\n(full
\nscale)<\/td>\n		Single-
\nended input<\/td>\n		250
\n\u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-AD3203<\/strong><\/td>\n<\/tr>\n
Differential
\nInput<\/td>\n		NX-AD3204<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n0 to
\n30000<\/td>\n		\u00b10.1%
\n(full
\nscale)<\/td>\n		Differential
\nInput<\/td>\n		10
\n\u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-AD3208<\/strong><\/td>\n<\/tr>\n
8
\npoints<\/td>\n		1\/8000<\/td>\n0 to 8000<\/td>\n\u00b10.2%
\n(full
\nscale)<\/td>\n		Single-
\nended input<\/td>\n		250
\n\u03bcs\/
\npoint<\/td>\n		85 \u03a9<\/td>\nFree-Run
\nrefreshing<\/td>\n		NX-AD4203<\/strong><\/td>\n<\/tr>\n
Differential
\nInput<\/td>\n		NX-AD4204<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n0 to
\n30000<\/td>\n		\u00b10.1%
\n(full
\nscale)<\/td>\n		Differential
\nInput<\/td>\n		10
\n\u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-AD4208<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Num-
\nber
\nof
\npoints<\/strong><\/th>\n		Output
\nrange<\/strong><\/th>\n		Reso-
\nlution<\/strong><\/th>\n		Output setting
\nvalue, decimal
\nnumber
\n(0 to 100%)<\/strong><\/th>\n		Over all
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		Con-
\nversion
\ntime<\/strong><\/th>\n		I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n<\/tr>\n
Voltage
\nOutput
\ntype
\n\"3187_lu_2_1\"<\/strong><\/th>\n		2
\npoints<\/td>\n		-10 to
\n+10V<\/td>\n		1\/8000<\/td>\n-4000 to 4000<\/td>\n\u00b10.3%
\n(full scale)<\/td>\n		250 \u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-DA2603<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n-15000 to
\n15000<\/td>\n		\u00b10.1%
\n(full scale)<\/td>\n		10 \u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-DA2605<\/strong><\/td>\n<\/tr>\n
4
\npoints<\/td>\n		1\/8000<\/td>\n-4000 to 4000<\/td>\n\u00b10.3%
\n(full scale)<\/td>\n		250 \u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-DA3603<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n-15000 to
\n15000<\/td>\n		\u00b10.1%
\n(full scale)<\/td>\n		10 \u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-DA3605<\/strong><\/td>\n<\/tr>\n
Current
\nOutput
\ntype
\n\"3187_lu_2_2\"<\/strong><\/th>\n		2
\npoints<\/td>\n		4 to
\n20 mA<\/td>\n		1\/8000<\/td>\n0 to 8000<\/td>\n\u00b10.3%
\n(full scale)<\/td>\n		250 \u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-DA2203<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n0 to 30000<\/td>\n\u00b10.1%
\n(full scale)<\/td>\n		10 \u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-DA2205<\/strong><\/td>\n<\/tr>\n
4
\npoints<\/td>\n		1\/8000<\/td>\n0 to 8000<\/td>\n\u00b10.3%
\n(full scale)<\/td>\n		250 \u03bcs\/
\npoint<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-DA3203<\/strong><\/td>\n<\/tr>\n
1\/30000<\/td>\n0 to 30000<\/td>\n\u00b10.1%
\n(full scale)<\/td>\n		10 \u03bcs\/
\npoint<\/td>\n		Selectable
\nSynchronous
\nI\/O refreshing
\nor Free-Run
\nrefreshing<\/td>\n		NX-DA3205<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nFor 10 Units (Terminal Block: 30 pins, Unit: 30 pins)<\/td>\nNX-AUX02<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
No. of terminals<\/strong><\/th>\nTerminal number
\nindications<\/strong><\/th>\n		Ground terminal
\nmark<\/strong><\/th>\n		Terminal current
\ncapacity<\/strong><\/th>\n<\/tr>\n
Terminal Block<\/strong><\/th>\n8<\/td>\nA\/B<\/td>\nNone<\/td>\n10 A<\/td>\nNX-TBA082<\/strong><\/td>\n<\/tr>\n
12<\/td>\nNX-TBA122<\/strong><\/td>\n<\/tr>\n
16<\/td>\nNX-TBA162<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Accessories<\/h4>\n
\n
\n

Not included.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to 100 \u03a9 or less<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating temperature<\/strong><\/th>\n0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating humidity<\/strong><\/th>\n10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage temperature<\/strong><\/th>\n-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\n2 or less: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\n2 kV on power supply line (Conforms to IEC61000-4-4.)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of
\n9.8 m\/s2<\/sup>, 100 min each in X, Y, and Z directions
\n(10 sweeps of 10 min each = 100 min total)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and
\nZ directions<\/td>\n<\/tr>\n
Applicable standards *<\/strong><\/th>\ncULus: Listed (UL508), ANSI\/ISA 12.12.01, EU: EN 61131-2, C-Tick
\nor RCM, KC Registration, NK, LR<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Analog Input Unit Specifications<\/h4>\n

Analog Input Unit (voltage input type) 2 points NX-AD2603<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD2603<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_2_1\"<\/td>\n		Input method<\/strong><\/th>\nSingle-ended input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.35 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.05 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_2_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_2_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 2 points NX-AD2604<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD2604<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_3_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.35 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.05 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_3_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_3_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 2 points NX-AD2608<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD2608<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_4_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.35 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.05 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_4_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 \u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_4_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 4 points NX-AD3603<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD3603<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_5_1\"<\/td>\n		Input method<\/strong><\/th>\nSingle-ended input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.35 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.10 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_5_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_5_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 4 points NX-AD3604<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD3604<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_6_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.35 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.10 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_6_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_6_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 4 points NX-AD3608<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD3608<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_7_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.45 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.10 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_7_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_7_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 8 points NX-AD4603<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD4603<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_8_1\"<\/td>\n		Input method<\/strong><\/th>\nSingle-ended input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.45 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.15 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_8_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_8_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 8 points NX-AD4604<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD4604<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_9_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.45 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.15 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_9_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_9_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (voltage input type) 8 points NX-AD4608<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(voltage input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD4608<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_10_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b115 V<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n1 M\u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.45 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.15 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_10_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 \u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_10_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 2 points NX-AD2203<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD2203<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_11_1\"<\/td>\n		Input method<\/strong><\/th>\nSingle-ended input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n250 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.25 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.90 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_11_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_11_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 2 points NX-AD2204<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD2204<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_12_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n250 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.25 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.90 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_12_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_12_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 2 points NX-AD2208<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD2208<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_13_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n250 \u03a9<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.25 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.90 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_13_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_13_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 4 points NX-AD3203<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD3203<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_14_1\"<\/td>\n		Input method<\/strong><\/th>\nSingle-ended input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n250 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.25 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.90 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_14_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_14_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 4 points NX-AD3204<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD3204<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_15_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n250 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.25 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.90 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_15_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_15_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 4 points NX-AD3208<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD3208<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_16_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n250 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.30 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.95 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_16_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_16_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 8 points NX-AD4203<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD4203<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_17_1\"<\/td>\n		Input method<\/strong><\/th>\nSingle-ended input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n85 \u03a9<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.40 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.05 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_17_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_17_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 8 points NX-AD4204<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD4204<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_18_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n85 \u03a9<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.4% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.40 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.05 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_18_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_18_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Input Unit (current input type) 8 points NX-AD4208<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Input Unit
\n(current input type)<\/td>\n		Model<\/strong><\/th>\nNX-AD4208<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_19_1\"<\/td>\n		Input method<\/strong><\/th>\nDifferential Input<\/td>\n<\/tr>\n
Input range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Input conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Absolute maximum
\nrating<\/strong><\/th>\n		\u00b130 mA<\/td>\n<\/tr>\n
Input impedance<\/strong><\/th>\n85 \u03a9<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.2% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		No supply<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.45 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.10 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_19_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_19_3\"<\/td>\n<\/tr>\n
Input disconnection
\ndetection<\/strong><\/th>\n		Supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit Specifications<\/h4>\n

Analog Output Unit (voltage output type) 2 points NX-DA2603<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(voltage output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA2603<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_20_1\"<\/td>\n		Output range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		5 k\u03a9 min.<\/td>\n<\/tr>\n
Output impedance<\/strong><\/th>\n0.5 \u03a9 max.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.5% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.40 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.10 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_20_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_20_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (voltage output type) 2 points NX-DA2605<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(voltage output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA2605<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_21_1\"<\/td>\n		Output range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		5 k\u03a9 min.<\/td>\n<\/tr>\n
Output impedance<\/strong><\/th>\n0.5 \u03a9 max.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.40 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.10 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_21_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_21_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (voltage output type) 4 points NX-DA3603<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(voltage output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA3603<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_22_1\"<\/td>\n		Output range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		5 k\u03a9 min.<\/td>\n<\/tr>\n
Output impedance<\/strong><\/th>\n0.5 \u03a9 max.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.5% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.35 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.25 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_22_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_22_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (voltage output type) 4 points NX-DA3605<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(voltage output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA3605<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_23_1\"<\/td>\n		Output range<\/strong><\/th>\n-10 to +10 V<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		5 k\u03a9 min.<\/td>\n<\/tr>\n
Output impedance<\/strong><\/th>\n0.5 \u03a9 max.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.60 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.25 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_23_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_23_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (current output type) 2 points NX-DA2203<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(current output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA2203<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_24_1\"<\/td>\n		Output range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		600 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.6% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n2.10 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.75 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_24_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions:
\nFor upright installation: No restrictions
\nFor any installation other than upright: Restricted as shown in the graph below.
\n\"3187_sp_24_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_24_4\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (current output type) 2 points NX-DA2205<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(current output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA2205<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSelectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_25_1\"<\/td>\n		Output range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		600 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n2.10 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.75 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_25_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions:
\nFor upright installation: No restrictions
\nFor any installation other than upright: Restricted as shown in the graph below.
\n\"3187_sp_25_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_25_4\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (current output type) 4 points NX-DA3203<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(current output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA3203<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_26_1\"<\/td>\n		Output range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		350 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/8000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.6% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n250 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n2.10 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.80 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_26_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions:
\nFor upright installation: No restrictions
\nFor any installation other than upright: Restricted as shown in the graph below.
\n\"3187_sp_26_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_26_4\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Analog Output Unit (current output type) 4 points NX-DA3205<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAnalog Output Unit
\n(current output type)<\/td>\n		Model<\/strong><\/th>\nNX-DA3205<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(12 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicator<\/strong><\/th>\nTS indicator
\n\"3187_sp_27_1\"<\/td>\n		Output range<\/strong><\/th>\n4 to 20 mA<\/td>\n<\/tr>\n
Output conversion
\nrange<\/strong><\/th>\n		-5 to 105% (full scale)<\/td>\n<\/tr>\n
Allowable load
\nresistance<\/strong><\/th>\n		350 \u03a9 min.<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1\/30000 (full scale)<\/td>\n<\/tr>\n
Overall
\naccuracy<\/strong><\/th>\n		25\u2103<\/strong><\/th>\n\u00b10.1% (full scale)<\/td>\n<\/tr>\n
0 to 55\u2103<\/strong><\/th>\n\u00b10.3% (full scale)<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 \u03bcs\/point<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nBetween the input and the NX bus:
\nPower = Transformer, Signal =
\nDigital isolator (no isolation between
\ninputs)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits
\nfor 1 minute at a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n2.10 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.80 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3187_sp_27_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions:
\nFor upright installation: No restrictions
\nFor any installation other than upright: Restricted as shown in the graph below.
\n\"3187_sp_27_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3187_sp_27_4\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n

Connected to a CPU Unit<\/h4>\n
\n
\n

Refer to the user’s manual for the CPU Unit details on the CPU Units to which NX Units can be connected.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n
NX Units<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCPU Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-AD[][][][]
\nNX-DA[][][][]<\/td>\n		Ver.1.0<\/td>\nVer.1.13<\/td>\nVer.1.17<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.<\/div>\n<\/div>\n<\/div>\n

Connected to an EtherCAT Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n
NX Units<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nEtherCAT Coupler Unit<\/strong><\/th>\nCPU Unit or Industrial PC<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-AD[][][][]
\nNX-DA[][][][]<\/td>\n		Ver.1.0<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.06<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.<\/div>\n<\/div>\n<\/div>\n

Connected to an EtherNet\/IP Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
NX Units<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit
\nversion<\/strong><\/th>\n		Application with an NJ\/NX\/NY-series
\nController *1<\/strong><\/th>\n		Application with a CS\/CJ\/CP-series
\nPLC *2<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		NX-IO
\nConfigurator *3<\/strong><\/th>\n<\/tr>\n
NX-AD[][][][]
\nNX-DA[][][][]<\/td>\n		Ver.1.0<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.
\n*1 Refer to the user\u2019s manual for the EtherNet\/IP Coupler Units for information on the unit versions of EtherNet\/IP Units
\nthat are compatible with EtherNet\/IP Coupler Units.
\n*2 Refer to the user\u2019s manual for the EtherNet\/IP Coupler Units for information on the unit versions of CPU Units and
\nEtherNet\/IP Units that are compatible with EtherNet\/IP Coupler Units.
\n*3 For connection to an EtherNet\/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the
\nperipheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect by any other path. If you need to connect by
\nanother path, use an EtherNet\/IP Coupler Unit with unit version 1.2 or later.<\/div>\n<\/div>\n<\/div>\n

Connected to Communication Control Units<\/h4>\n
\n
\n
\n\n\n\n\n\n
NX Units<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCommunication Control Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-AD[][][][]
\nNX-DA[][][][]<\/td>\n		Ver.1.0<\/td>\nVer.1.00<\/td>\nVer.1.24<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

Screwless Clamping Terminal Block Type<\/h4>\n

12 mm Width<\/h4>\n
\n
\"NX-AD<\/div>\n
\n

* The dimension is 1.35 mm for Units with lot numbers through December 2014.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\n
\n
\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-AD\/DA Data Sheet<\/a><\/td>\n–
\n[5946KB]<\/span><\/td>\n		Aug 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n

<\/h2>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Analog inputs and outputs to meet all machine control needs, from general purpose to high-speed synchronous control<\/h2>\n","protected":false},"featured_media":1340,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[98,63,72],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1379"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1379"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1340"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1379"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1379"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1379"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}