{"id":1374,"date":"2019-01-02T02:13:42","date_gmt":"2019-01-02T02:13:42","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1374"},"modified":"2019-01-02T02:13:43","modified_gmt":"2019-01-02T02:13:43","slug":"nx-id-ia-od-oc-md-2","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/nx-id-ia-od-oc-md-2\/","title":{"rendered":"NX-ID \/ IA \/ OD \/ OC \/ MD"},"content":{"rendered":"
\n
\n

\u2022 High-speed I\/O refreshing using the EtherCAT coupler<\/p>\n

\u2022 I\/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)<\/p>\n

\u2022 Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy<\/p>\n

\u2022 Detachable terminals for easy maintenance<\/p>\n

\u2022 Screwless Push-In Plus terminal block or MIL\/Fujitsu connector speeds up installation<\/p>\n

\u2022 Compact with a width of 12 mm per unit (connector type: 30 mm)<\/p>\n

\u2022 4, 8, 16 or 32 inputs for flexible I\/O configuration (NX-ID\/IA)<\/p>\n

\u2022 2, 4, 8, 16 or 32 outputs for flexible I\/O configuration (NX-OD\/OC)<\/p>\n

\u2022 Connect to the CJ PLC using the EtherNet\/IPTM<\/sup>\u00a0bus coupler<\/p>\n<\/div>\n<\/div>\n

\n
\n

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
\nEtherCAT\u00ae is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
\nEtherNet\/IP\u2122 is a trademark of ODVA.
\nOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.<\/p>\n<\/div>\n

Model Number Structure<\/h4>\n
\n
\"NX-ID<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n

Ordering Information<\/h4>\n

Applicable standards<\/h4>\n
\n
\n

Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Digital Input Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Product Name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Number
\nof points<\/strong><\/th>\n		Internal
\nI\/O
\ncommon<\/strong><\/th>\n		Rated
\ninput
\nvoltage<\/strong><\/th>\n		I\/O refreshing method<\/strong><\/th>\nON\/OFF
\nresponse
\ntime<\/strong><\/th>\n<\/tr>\n
DC Input Unit
\n\"3185_lu_2_1\"
\n(Screwless Clamping
\nTerminal Block,
\n12 mm Width)<\/strong><\/th>\n		4 points<\/td>\nNPN<\/td>\n12 to
\n24 VDC<\/td>\n		Switching Synchronous I\/O
\nrefreshing and Free-Run
\nrefreshing<\/td>\n		20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-ID3317<\/strong><\/td>\n<\/tr>\n
24 VDC<\/td>\n100 ns max.\/
\n100 ns max.<\/td>\n		NX-ID3343<\/strong><\/td>\n<\/tr>\n
Input refreshing with input
\nchanged time only *1<\/td>\n		NX-ID3344<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n12 to
\n24 VDC<\/td>\n		Switching Synchronous I\/O
\nrefreshing and Free-Run
\nrefreshing<\/td>\n		20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-ID3417<\/strong><\/td>\n<\/tr>\n
24 VDC<\/td>\nInput refreshing with input
\nchanged time only *1<\/td>\n		100 ns max.\/
\n100 ns max.<\/td>\n		NX-ID3443<\/strong><\/td>\n<\/tr>\n
NX-ID3444<\/strong><\/td>\n<\/tr>\n
8 points<\/td>\nNPN<\/td>\nSwitching Synchronous I\/O
\nrefreshing and Free-Run
\nrefreshing<\/td>\n		20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-ID4342<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\nNX-ID4442<\/strong><\/td>\n<\/tr>\n
16 points<\/td>\nNPN<\/td>\nNX-ID5342<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\nNX-ID5442<\/strong><\/td>\n<\/tr>\n
DC Input Unit
\n\"3185_lu_2_2\"
\n(M3 Screw Terminal
\nBlock, 30 mm Width)<\/strong><\/th>\n		16 points<\/td>\nFor both
\nNPN\/PNP<\/td>\n		24 VDC<\/td>\nSwitching Synchronous I\/O
\nrefreshing and Free-Run
\nrefreshing<\/td>\n		20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-ID5142-1<\/strong><\/td>\n<\/tr>\n
DC Input Unit
\n\"3185_lu_2_3\"
\n(MIL Connector,
\n30 mm Width)<\/strong><\/th>\n		16 points<\/td>\nFor both
\nNPN\/PNP<\/td>\n		24 VDC<\/td>\nSwitching Synchronous I\/O
\nrefreshing and Free-Run
\nrefreshing<\/td>\n		20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-ID5142-5<\/strong><\/td>\n<\/tr>\n
32 points<\/td>\nNX-ID6142-5<\/strong><\/td>\n<\/tr>\n
DC Input Unit
\n\"3185_lu_2_4\"
\n(Fujitsu Connector,
\n30 mm Width)<\/strong><\/th>\n		32 points<\/td>\nFor both
\nNPN\/PNP<\/td>\n		24 VDC<\/td>\nSwitching Synchronous I\/O
\nrefreshing and Free-Run
\nrefreshing<\/td>\n		20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-ID6142-6<\/strong><\/td>\n<\/tr>\n
AC Input Unit
\n\"3185_lu_2_5\"
\n(Screwless Clamping
\nTerminal Block,
\n12 mm Width)<\/strong><\/th>\n		4 points<\/td>\n200 to 240 VAC,
\n50\/60 Hz
\n(170 to 264 VAC,
\n\u00b13 Hz)<\/td>\n		Free-Run refreshing<\/td>\n10 ms max.\/
\n40 ms max.<\/td>\n		NX-IA3117<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. To use input refreshing with input changed time, the EtherCAT Coupler Unit with unit version 1.1 or later and the
\nSysmac Studio version 1.07 or higher are required.<\/div>\n<\/div>\n<\/div>\n

Digital Output Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Product
\nName<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Number
\nof
\npoints<\/strong><\/th>\n		Internal
\nI\/O
\ncommon<\/strong><\/th>\n		Maximum
\nvalue of load
\ncurrent<\/strong><\/th>\n		Rated
\nvoltage<\/strong><\/th>\n		I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n		ON\/OFF
\nresponse
\ntime<\/strong><\/th>\n<\/tr>\n
Transistor
\nOutput Unit
\n\"3185_lu_3_1\"
\n(Screwless
\nClamping
\nTerminal Block,
\n12 mm Width)<\/strong><\/th>\n		2<\/td>\nNPN<\/td>\n0.5 A\/point,
\n1 A\/Unit<\/td>\n		24 VDC<\/td>\nOutput
\nrefreshing with
\nspecified time
\nstamp only *1<\/td>\n		300 ns max.\/
\n300 ns max.<\/td>\n		NX-OD2154<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\nNX-OD2258<\/strong><\/td>\n<\/tr>\n
4<\/td>\nNPN<\/td>\n0.5 A\/point,
\n2 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		Switching
\nSynchronous
\nI\/O refreshing
\nand Free-Run
\nrefreshing<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD3121<\/strong><\/td>\n<\/tr>\n
24 VDC<\/td>\n300 ns max.\/
\n300 ns max.<\/td>\n		NX-OD3153<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD3256<\/strong><\/td>\n<\/tr>\n
300 ns max.\/
\n300 ns max.<\/td>\n		NX-OD3257<\/strong><\/td>\n<\/tr>\n
2 A\/point,
\n8 A\/Unit<\/td>\n		0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD3268<\/strong><\/td>\n<\/tr>\n
8<\/td>\nNPN<\/td>\n0.5 A\/point,
\n4 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD4121<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n24 VDC<\/td>\n0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD4256<\/strong><\/td>\n<\/tr>\n
16<\/td>\nNPN<\/td>\n12 to
\n24 VDC<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD5121<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n24 VDC<\/td>\n0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD5256<\/strong><\/td>\n<\/tr>\n
Transistor
\nOutput Unit
\n\"3185_lu_3_2\"
\n(M3 Screw
\nTerminal Block,
\n30 mm Width)<\/strong><\/th>\n		16<\/td>\nNPN<\/td>\n0.5 A\/point,
\n5 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		Switching
\nSynchronous
\nI\/O refreshing
\nand Free-Run
\nrefreshing<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD5121-1<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n24 VDC<\/td>\n0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD5256-1<\/strong><\/td>\n<\/tr>\n
Transistor
\nOutput Unit
\n\"3185_lu_3_3\"
\n(MIL Connector,
\n30 mm Width)<\/strong><\/th>\n		16<\/td>\nNPN<\/td>\n0.5 A\/point,
\n2 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		Switching
\nSynchronous
\nI\/O refreshing
\nand Free-Run
\nrefreshing<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD5121-5<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n24 VDC<\/td>\n0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD5256-5<\/strong><\/td>\n<\/tr>\n
32<\/td>\nNPN<\/td>\n0.5 A\/point,
\n2 A\/common,
\n4 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD6121-5<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n24 VDC<\/td>\n0.5 ms max.\/
\n1.0 ms max.<\/td>\n		NX-OD6256-5<\/strong><\/td>\n<\/tr>\n
Transistor
\nOutput Unit
\n\"3185_lu_3_4\"
\n(Fujitsu
\nConnector,
\n30 mm Width)<\/strong><\/th>\n		32<\/td>\nNPN<\/td>\n0.5 A\/point,
\n2 A\/common,
\n4 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		Switching
\nSynchronous
\nI\/O refreshing
\nand Free-Run
\nrefreshing<\/td>\n		0.1 ms max.\/
\n0.8 ms max.<\/td>\n		NX-OD6121-6<\/strong><\/td>\n<\/tr>\n
Relay Output
\nUnit
\n\"3185_lu_3_5\"
\n(Screwless
\nClamping
\nTerminal Block,
\n12 mm Width\/
\n24 mm Width)<\/strong><\/th>\n		2<\/td>\nRelay type:
\nN.O.<\/td>\n		250 VAC\/2 A (cos\u03c6=1),
\n250 VAC\/2 A (cos\u03c6=0.4),
\n24 VDC\/2 A, 4 A\/Unit<\/td>\n		Free-Run
\nrefreshing<\/td>\n		15 ms max.\/
\n15 ms max.<\/td>\n		NX-OC2633<\/strong><\/td>\n<\/tr>\n
Relay type:
\nN.O.+N.C.<\/td>\n		NX-OC2733<\/strong><\/td>\n<\/tr>\n
8<\/td>\nRelay type:
\nN.O.<\/td>\n		250 VAC\/2 A (cos\u03c6=1),
\n250 VAC\/2 A (cos\u03c6=0.4),
\n24 VDC\/2 A, 8 A\/Unit<\/td>\n		Free-Run
\nrefreshing<\/td>\n		15ms max.\/
\n15ms max.<\/td>\n		NX-OC4633<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. To use input refreshing with input changed time, the EtherCAT Coupler Unit with unit version 1.1 or later and the
\nSysmac Studio version 1.07 or higher are required.<\/div>\n<\/div>\n<\/div>\n

Digital Mixed I\/O Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Product
\nName<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Number
\nof
\npoints<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		Maximum
\nvalue of load
\ncurrent<\/strong><\/th>\n		I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n		ON\/OFF
\nresponse
\ntime<\/strong><\/th>\n<\/tr>\n
DC Input\/
\nTransistor
\nOutput Unit
\n\"3185_lu_4_1\"
\n(MIL Connector,
\n30 mm Width)<\/strong><\/th>\n		Outputs:
\n16 points
\nInputs:
\n16 points<\/td>\n		Outputs: NPN
\nInputs: For both
\nNPN\/PNP<\/td>\n		Outputs:
\n12 to 24 VDC
\nInputs: 24 VDCV<\/td>\n		Switching
\nSynchronous
\nI\/O refreshing
\nand Free-Run
\nrefreshing<\/td>\n		Outputs: 0.1 ms max.\/
\n0.8 ms max.
\nInputs: 20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-MD6121-5<\/strong><\/td>\n<\/tr>\n
Outputs: PNP
\nInputs: For both
\nNPN\/PNP<\/td>\n		Outputs:
\n24 VDC
\nInputs: 24 VDC<\/td>\n		Outputs: 0.5 ms max.\/
\n1.0 ms max.
\nInputs: 20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-MD6256-5<\/strong><\/td>\n<\/tr>\n
Transistor
\nOutput Unit
\n\"3185_lu_4_2\"
\n(Fujitsu
\nConnector,
\n30 mm Width)<\/strong><\/th>\n		Outputs:
\n16
\npoints
\nInputs:
\n16
\npoints<\/td>\n		Outputs: NPN
\nInputs: For both
\nNPN\/PNP<\/td>\n		Outputs:
\n12 to 24 VDC
\nInputs: 24 VDC<\/td>\n		Switching
\nSynchronous
\nI\/O refreshing
\nand Free-Run
\nrefreshing<\/td>\n		Outputs: 0.1 ms max.\/
\n0.8 ms max.
\nInputs: 20 \u03bcs max.\/
\n400 \u03bcs max.<\/td>\n		NX-MD6121-6<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nFor 10 Units (Terminal Block: 30 pins, Unit: 30 pins)<\/td>\nNX-AUX02<\/strong><\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
No. of
\nterminals<\/strong><\/th>\n		Terminal number
\nindications<\/strong><\/th>\n		Ground
\nterminal mark<\/strong><\/th>\n		Terminal current
\ncapacity<\/strong><\/th>\n<\/tr>\n
Terminal Block<\/strong><\/th>\n8<\/td>\nA\/B<\/td>\nNone<\/td>\n10 A<\/td>\nNX-TBA082<\/strong><\/td>\n—<\/td>\n<\/tr>\n
12<\/td>\nNX-TBA122<\/strong><\/td>\n<\/tr>\n
16<\/td>\nNX-TBA162<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Accessories<\/h4>\n
\n
\n

Not included.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to 100 \u03a9 or less<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating temperature<\/strong><\/th>\n0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating humidity<\/strong><\/th>\n10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage temperature<\/strong><\/th>\n-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\n2 or less: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\n2 kV on power supply line (Conforms to IEC61000-4-4.)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance *1<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of
\n9.8 m\/s2<\/sup>, 100 min each in X, Y, and Z directions
\n(10 sweeps of 10 min each = 100 min total)<\/td>\n<\/tr>\n
Shock resistance *1<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and
\nZ directions<\/td>\n<\/tr>\n
Applicable standards *2<\/strong><\/th>\ncULus: Listed (UL508) or Listed (UL 61010-2-201), ANSI\/ISA 12.12.01,
\nEU: EN 61131-2 or EN 61010-2-201, C-Tick or RCM, KC: KC Registration, NK, LR<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. For the Relay Output Unit, refer to the Digital Input Unit Specifications.
\n*2. Consult your OMRON representative for the most recent applicable standards for each model.<\/div>\n<\/div>\n<\/div>\n

Digital Input Unit Specifications<\/h4>\n

DC Input Unit (Screwless Clamping Terminal Block, 12 mm Width)<\/h4>\n

NX-ID3317<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID3317<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_2_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n12 to 24 VDC (9 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n6 mA typical (at 24 VDC), rated current<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n9 VDC min.\/3 mA min. (between IOV
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		2 VDC max.\/1 mA max. (between IOV
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 0.25 ms, 0.5 ms, 1 ms
\n(factory setting), 2 ms, 4 ms, 8 ms, 16
\nms, 32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_2_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_2_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID3343<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID3343<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_3_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min. (between IOV
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max. (between IOV
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		100 ns max.\/100 ns max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 1 \u03bcs, 2 \u03bcs, 4 \u03bcs, 8 \u03bcs
\n(factory setting), 16 \u03bcs, 32 \u03bcs, 64 \u03bcs,
\n128 \u03bcs, 256 \u03bcs<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for 1
\nminute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_3_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_3_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID3344<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID3344<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Input refreshing with input changed time<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_4_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min. (between IOV
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max. (between IOV
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		100 ns max.\/100 ns max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter *<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for 1
\nminute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_4_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_4_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
* This model does not support the input filter. If the Unit is susceptible to noise, take countermeasures such as separating
\nor shielding the Unit and signal lines from the noise source. Refer to NX-series Digital I\/O Unit User\u2019s Manual (W521) for
\ninformation on countermeasures.<\/div>\n<\/div>\n<\/div>\n

NX-ID3417<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID3417<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_5_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n12 to 24 VDC (9 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n6 mA typical (at 24 VDC), rated current<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n9 VDC min.\/3 mA min. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		2 VDC max.\/1 mA max. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 0.25 ms, 0.5 ms, 1 ms
\n(factory setting), 2 ms, 4 ms, 8 ms, 16
\nms, 32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_5_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_5_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID3443<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID3443<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_6_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		100 ns max.\/100 ns max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 1 \u03bcs, 2 \u03bcs, 4 \u03bcs, 8 \u03bcs
\n(factory setting),16 \u03bcs, 32 \u03bcs, 64 \u03bcs,
\n128 \u03bcs, 256 \u03bcs<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_6_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_6_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID3444<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID3444<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Input refreshing with input changed time<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator
\n\"3185_sp_7_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min.
\n(between IOG and each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between IOG and each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		100 ns max.\/100 ns max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter *<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.1 A\/terminal max.,
\nIOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_7_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_7_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
* This model does not support the input filter. If the Unit is susceptible to noise, take countermeasures such as separating
\nor shielding the Unit and signal lines from the noise source. Refer to NX-series Digital I\/O Unit User\u2019s Manual (W521) for
\ninformation on countermeasures.<\/div>\n<\/div>\n<\/div>\n

NX-ID4342<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID4342<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_8_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 0.25 ms, 0.5 ms, 1 ms
\n(factory setting), 2 ms, 4 ms, 8 ms, 16
\nms, 32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_8_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_8_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID4442<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID4442<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_9_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 0.25 ms, 0.5 ms, 1 ms
\n(factory setting), 2 ms, 4 ms, 8 ms, 16
\nms, 32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOG: 0.1 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_9_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_9_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID5342<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID5342<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_10_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/2 mA min. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/0.5 mA max. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 0.25 ms, 0.5 ms, 1 ms
\n(factory setting), 2 ms, 4 ms, 8 ms, 16
\nms, 32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_10_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_10_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID5442<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID5442<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_11_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n3.5 mA typical (at 24 VDC), rated
\ncurrent<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/2 mA min. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/0.5 mA max. (between IOG
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nWithout filter, 0.25 ms, 0.5 ms, 1 ms
\n(factory setting), 2 ms, 4 ms, 8 ms, 16
\nms, 32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_11_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_11_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

DC Input Unit (M3 Screw Terminal Block, 30 mm Width)<\/h4>\n

NX-ID5142-1<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID5142-1<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		M3 screw terminal block (18 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator
\n\"3185_sp_12_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nFor both NPN\/PNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n7 mA typical (at 24 VDC)<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min. (between COM
\nand each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max. (between COM
\nand each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms (default),
\n2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms,
\n128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.85 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n125 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_12_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_12_3\"<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_12_4\"
\n\u2022 The polarity of the input power supply can be connected in either direction.<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

DC Input Unit (MIL Connector, 30 mm Width)<\/h4>\n

NX-ID5142-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID5142-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		MIL connector (20 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicators
\n\"3185_sp_13_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nFor both NPN\/PNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n7 mA typical (at 24 VDC)<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min.\/3 mA min.
\n(between COM and each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between COM and each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms
\n(default), 2 ms, 4 ms, 8 ms, 16 ms,
\n32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.85 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n85 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_13_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_13_3\"<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_13_4\"
\n\u2022 The polarity of the input power supply can be connected in either direction.
\n\u2022 Be sure to wire both pins 3 and 4 (COM), and set the same polarity for both pins.<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-ID6142-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID6142-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n32 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		MIL connector (40 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicators
\n\"3185_sp_14_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nFor both NPN\/PNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (19 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n4.1 mA typical (24 VDC)<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n19 VDC min.\/3 mA min.
\n(between COM and each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between COM and each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms
\n(default), 2 ms, 4 ms, 8 ms, 16 ms,
\n32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.60 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n90 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_14_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_14_3\"<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_14_4\"
\n\u2022 The polarity of the input power supply can be connected in either direction.
\n\u2022 Be sure to wire both pins 23 and 24 (COM0), and set the same polarity for both pins.
\n\u2022 Be sure to wire both pins 3 and 4 (COM1), and set the same polarity for both pins.<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

DC Input Unit (Fujitsu Connector, 30 mm Width)<\/h4>\n

NX-ID6142-6<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-ID6142-6<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n32 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Fujitsu connector (40 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator
\n\"3185_sp_15_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nFor both NPN\/PNP<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n24 VDC (19 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n4.1 mA typical (24 VDC)<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n19 VDC min.\/3 mA min.
\n(between COM and each signal)<\/td>\n<\/tr>\n
OFF voltage\/OFF
\ncurrent<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between COM and each signal)<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms (default),
\n2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms,
\n128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.95 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n90 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_15_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_15_3\"<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_15_4\"
\n\u2022 The polarity of the input power supply can be connected in either direction.
\n\u2022 Be sure to wire both pins A9 and A18 (COM0), and set the same polarity for both pins.
\n\u2022 Be sure to wire both pins B9 and B18 (COM1), and set the same polarity for both pins.<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

AC Input Unit (Screwless Clamping Terminal Block, 12 mm Width)<\/h4>\n

NX-IA3117<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nAC Input Unit<\/td>\nModel<\/strong><\/th>\nNX-IA3117<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points,
\nindependent contacts<\/td>\n		External connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (8
\nterminals)<\/td>\n<\/tr>\n
Capacity<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\ninput indicator<\/p>\n
\"3185_sp_16_1\"<\/div>\n<\/td>\n
Internal I\/O common<\/strong><\/th>\nNo polarity<\/td>\n<\/tr>\n
Rated input voltage<\/strong><\/th>\n200 to 240 VAC, 50\/60 Hz (170 to
\n264 VAC, \u00b13 Hz)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n9 mA typical (at 200 VAC, 50 Hz)
\n11 mA typical (at 200 VAC, 60 Hz)<\/td>\n<\/tr>\n
ON voltage\/
\nON current<\/strong><\/th>\n		120 VAC min.\/4 mA min.<\/td>\n<\/tr>\n
OFF voltage\/
\nOFF current<\/strong><\/th>\n		40 VAC max.\/2 mA max.<\/td>\n<\/tr>\n
ON\/OFF response time<\/strong><\/th>\n10 ms max.\/40 ms max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms
\n(default), 2 ms, 4 ms, 8 ms, 16 ms,
\n32 ms, 64 ms, 128 ms, 256 ms<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		Between each AC input
\ncircuit: 20 M\u03a9 min. (at 500
\nVDC)
\nBetween the external
\nterminals and the functional
\nground terminal: 20 M\u03a9 min.
\n(at 500 VDC)
\nBetween the external
\nterminals and internal
\ncircuits: 20 M\u03a9 min. (at 500
\nVDC)
\nBetween the internal circuit
\nand the functional ground
\nterminal: 20 M\u03a9 min. (at 100
\nVDC)<\/td>\n		Dielectric strength<\/strong><\/th>\nBetween each AC input circuit:
\nAC3700V VAC for 1 min at a leakage
\ncurrent of 5 mA max.
\nBetween the external terminals and
\nfunctional ground terminal: 2300 VAC
\nfor 1 min at a leakage current of 5 mA
\nmax.
\nBetween the external terminals and
\ninternal circuits: 2300 VAC for 1 min
\nat a leakage current of 5 mA max.
\nBetween the internal circuit and the
\nfunctional ground terminal: 510 VAC
\nfor 1 min at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from external
\nsource.<\/td>\n		Current capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.80 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n60 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_16_2\"<\/div>\n<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_16_3\"<\/div>\n<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Digital Output Unit Specifications<\/h4>\n

Transistor Output Unit (Screwless Clamping Terminal Block, 12 mm Width)<\/h4>\n

NX-OD2154<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD2154<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Output refreshing with specified time stamp<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_17_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 1 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		300 ns max.\/300 ns max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.,
\nIOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n0.85 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.45 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_17_2\"<\/div>\n

This unit uses a push-pull output circuit.<\/td>\n<\/tr>\n

Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_17_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD2258<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD2258<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Output refreshing with specified time stamp<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_18_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 1 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		300 ns max.\/300 ns max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.,
\nIOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n0.85 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		40 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_18_2\"<\/div>\n

This unit uses a push-pull output circuit.<\/td>\n<\/tr>\n

Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_18_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD3121<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD3121<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_19_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.,
\nIOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		10 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_19_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_19_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD3153<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD3153<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_20_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		300 ns max.\/300 ns max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.,
\nIOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_20_2\"<\/div>\n

This unit uses a push-pull output circuit.<\/td>\n<\/tr>\n

Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_20_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD3256<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD3256<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_21_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.,
\nIOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_21_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_21_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD3257<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD3257<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (12
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_22_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		300 ns max.\/300 ns max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nDigital isolator isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.,
\nIOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.85 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		40 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_22_2\"<\/div>\n

This unit uses a push-pull output circuit.<\/td>\n<\/tr>\n

Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_22_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD3268<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD3268<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n4 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_23_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		2 A\/point, 8 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 2 A\/terminal max.,
\nIOG: 2 A\/terminal max.,
\nCOM (+V): 4 A\/terminal max.,
\n0V: 4 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.85 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.50 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_23_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_23_3\"<\/div>\n

\u2022 0V has 2 terminals, so be sure to wire both terminals.
\n\u2022 COM (+V) has 2 terminals, so be sure to wire both terminals.<\/td>\n<\/tr>\n

Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD4121<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD4121<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_24_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOV: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.55 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		10 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_24_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_24_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD4256<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD4256<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_25_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		IOG: 0.5 A\/terminal max.<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.00 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.65 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_25_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_25_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD5121<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD5121<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_26_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.00 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.65 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_26_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_26_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD5256<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD5256<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (16
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Selectable Synchronous I\/O refreshing or Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_27_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the NX bus<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.10 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.70 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		40 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_27_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_27_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Transistor Output Unit (M3 Screw Terminal Block, 30 mm Width)<\/h4>\n

NX-OD5121-1<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD5121-1<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		M3 screw terminal block (18 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_28_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 5 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from the external
\nsource<\/td>\n		Current capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.90 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.60 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n125 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_28_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_28_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD5256-1<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD5256-1<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		M3 screw terminal block (18 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_29_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		20.4 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 5 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.95 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.65 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n125 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_29_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_29_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Transistor Output Unit (MIL Connector, 30 mm Width)<\/h4>\n

NX-OD5121-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD5121-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		MIL connector (20 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_30_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n0.95 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.60 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n80 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_30_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_30_3\"
\n\u2022 Be sure to wire both pins 3 and 4 (COM).
\n\u2022 Be sure to wire both pins 1 and 2 (+V).<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD5256-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD5256-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		MIL connector (20 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_31_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		20.4 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supplied from external
\nsource.<\/td>\n		Current capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.00 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.70 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		40 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n85 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_31_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_31_3\"
\n\u2022 Be sure to wire both pins 1 and 2 (COM (+V)).
\n\u2022 Be sure to wire both pins 3 and 4 (0V).<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD6121-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD6121-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n32 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		MIL connector (40 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_32_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/common, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.00 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.80 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		50 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n90 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_32_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_32_3\"
\n\u2022 Be sure to wire both pins 21 and 22 (+V0).
\n\u2022 Be sure to wire both pins 23 and 24 (COM0).
\n\u2022 Be sure to wire both pins 1 and 2 (+V1).
\n\u2022 Be sure to wire both pins 3 and 4 (COM1).<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-OD6256-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD6256-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n32 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		MIL connector (40 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_33_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		20.4 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/common, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.30 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n1.00 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		80 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n95 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_33_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\"3185_sp_33_3\"
\n\u2022 Be sure to wire both pins 21 and 22 (COM0 (+V)).
\n\u2022 Be sure to wire both pins 1 and 2 (COM1 (+V)).
\n\u2022 Be sure to wire both pins 23 and 24 (0V0).
\n\u2022 Be sure to wire both pins 3 and 4 (0V1).<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit protection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Transistor Output Unit (Fujitsu Connector, 30 mm Width)<\/h4>\n

NX-OD6121-6<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nTransistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OD6121-6<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n32 points<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		Fujitsu connector (40 terminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Switching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_34_1\"<\/td>\n		Internal I\/O common<\/strong><\/th>\nNPN<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Maximum value of
\nload current<\/strong><\/th>\n		0.5 A\/point, 2 A\/common, 4 A\/Unit<\/td>\n<\/tr>\n
Maximum inrush
\ncurrent<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
ON\/OFF response
\ntime<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric strength<\/strong><\/th>\n510 VAC between isolated circuits for
\n1 minute at a leakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.10 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.80 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		50 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n90 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_34_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection diagram<\/strong><\/th>\n		\n
\"3185_sp_34_3\"<\/div>\n

\u2022 Be sure to wire both pins A9 and A19 (COM0).
\n\u2022 Be sure to wire both pins B9 and B19 (COM1).
\n\u2022 Be sure to wire both pins A10 and A20 (+V0).
\n\u2022 Be sure to wire both pins B10 and B20 (+V1).<\/td>\n<\/tr>\n

Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Relay Output Unit (Screwless Clamping Terminal Block, 12 mm Width)<\/h4>\n

NX-OC2633<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nRelay Output Units<\/td>\nModel<\/strong><\/th>\nNX-OC2633<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points, independent contacts<\/td>\nExternal
\nconnection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (8
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_35_1\"<\/td>\n		Relay type<\/strong><\/th>\nN.O. contact<\/td>\n<\/tr>\n
Maximum
\nswitching capacity<\/strong><\/th>\n		250 VAC\/2 A (cos\u03c6 = 1),
\n250 VAC\/2 A (cos\u03c6 = 0.4),
\n24 VDC\/2 A, 4 A\/Unit<\/td>\n<\/tr>\n
Minimum
\nswitching capacity<\/strong><\/th>\n		5 VDC, 1 mA<\/td>\n<\/tr>\n
Relay service life<\/strong><\/th>\nElectrical: 100,000 operations *
\nMechanical: 20,000,000 operations<\/td>\n		ON\/OFF response
\ntime<\/strong><\/th>\n		15 ms max.\/15 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nRelay isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		Between A1\/B1 terminals and A3\/B3
\nterminals: 20 M\u03a9 min. (500 VDC)
\nBetween the external terminals and
\ninternal circuits: 20 M\u03a9 min. (500
\nVDC)
\nBetween the internal circuit and GR
\nterminal: 20 M\u03a9 min. (100 VDC)
\nBetween the external terminals and
\nGR terminal: 20 M\u03a9 min. (500 VDC)<\/td>\n		Dielectric
\nstrength<\/strong><\/th>\n		Between A1\/B1 terminals and A3\/B3
\nterminals: 2300 VAC for 1 min at a
\nleakage current of 5 mA max.
\nBetween the external terminals and
\nGR terminal: 2300 VAC for 1 min at a
\nleakage current of 5 mA max.
\nBetween the external terminals and
\ninternal circuits: 2300 VAC for 1 min
\nat a leakage current of 5 mA max.
\nBetween the internal circuit and GR
\nterminal: 510 VAC for 1 min at a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
Vibration
\nresistance<\/strong><\/th>\n		Conforms to IEC60068-2-6.
\n5 to 8.4 Hz with amplitude of 3.5 mm,
\n8.4 to 150 Hz, acceleration of 9.8
\nm\/s2<\/sup>
\n100 min each in X, Y, and Z
\ndirections
\n(10 sweeps of 10 min each = 100 min
\ntotal)<\/td>\n		Shock resistance<\/strong><\/th>\n100 m\/s2<\/sup>, 3 times each in X, Y, and
\nZ directions<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity
\nof I\/O power
\nsupply terminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.20 W max.
\n\u2022 Connected to a Communications
\nCoupler Unit
\n0.80 W max.<\/td>\n		I\/O current
\nconsumption<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n65 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\n
\"3185_sp_35_2\"<\/div>\n

You cannot replace the relay.<\/td>\n<\/tr>\n

Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection
\ndiagram<\/strong><\/th>\n		\"3185_sp_35_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective
\nfunction<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Electrical service life will vary depending on the current value. Refer to “NX-series Digital I\/O Units User\u2019s Manual” for details.<\/p>\n<\/div>\n<\/div>\n

NX-OC2733<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nRelay Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OC2733<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n2 points, independent contacts<\/td>\nExternal
\nconnection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block (8
\nterminals)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_36_1\"<\/td>\n		Maximum
\nswitching capacity<\/strong><\/th>\n		250 VAC\/2 A (cos\u03c6 = 1),
\n250 VAC\/2 A (cos\u03c6 = 0.4),
\n24 VDC\/2 A,
\n4 A\/Unit<\/td>\n<\/tr>\n
Minimum
\nswitching capacity<\/strong><\/th>\n		5 VDC, 10 mA<\/td>\n<\/tr>\n
Relay service life<\/strong><\/th>\nElectrical: 100,000 operations
\nMechanical: 20,000,000 operations<\/td>\n		ON\/OFF response
\ntime<\/strong><\/th>\n		15 ms max.\/15 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nRelay isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		Between A1\/3, B1\/3 terminals and
\nA5\/7, B5\/7 terminals: 20 M\u03a9 min.
\n(at 500 VDC)
\nBetween the external terminals and
\nfunctional ground terminal: 20 M\u03a9
\nmin. (at 500 VDC)
\nBetween the external terminals and
\ninternal circuits: 20 M\u03a9 min. (at 500
\nVDC)
\nBetween the internal circuit and the
\nfunctional ground terminal: 20 M\u03a9
\nmin. (at 100 VDC)<\/td>\n		Dielectric
\nstrength<\/strong><\/th>\n		Between A1\/3, B1\/3 terminals and
\nA5\/7, B5\/7 terminals: 2300 VAC for
\n1 min at a leakage current of 5 mA
\nmax.
\nBetween the external terminals and
\nthe functional ground terminal: 2300
\nVAC for 1 min at a leakage current
\nof 5 mA max.
\nBetween the external terminals and
\ninternal circuits: 2300 VAC for 1 min
\nat a leakage current of 5 mA max.
\nBetween the internal circuit and the
\nfunctional ground terminal: 510 VAC
\nfor 1 min at a leakage current of 5
\nmA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity
\nof I\/O power
\nsupply terminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.30 W max.
\n\u2022 Connected to a Communications
\nCoupler Unit
\n0.95 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_36_2\"
\nNO0 and NO1 are normal open contacts, and NC0 and NC1 are normal close contacts.
\nYou cannot replace the relay.<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection
\ndiagram<\/strong><\/th>\n		\"3185_sp_36_3\"<\/td>\n<\/tr>\n
Disconnection\/
\nShort-circuit
\ndetection<\/strong><\/th>\n		Not supported.<\/td>\nProtective
\nfunction<\/strong><\/th>\n		Not supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Relay Output Unit (Screwless Clamping Terminal Block, 24 mm Width)<\/h4>\n

NX-OC4633<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nRelay Output Unit<\/td>\nModel<\/strong><\/th>\nNX-OC4633<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n8 points, independent contacts<\/td>\nExternal
\nconnection
\nterminals<\/strong><\/th>\n		Screwless clamping terminal block
\n(8 terminals x 2)<\/td>\n<\/tr>\n
I\/O refreshing
\nmethod<\/strong><\/th>\n		Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator,
\noutput indicator
\n\"3185_sp_37_1\"<\/td>\n		Relay type<\/strong><\/th>\nN.O. contact<\/td>\n<\/tr>\n
Maximum
\nswitching capacity<\/strong><\/th>\n		250 VAC\/2 A (cos\u03c6 = 1),
\n250 VAC\/2 A (cos\u03c6 = 0.4),
\n24 VDC\/2 A,
\n8 A\/Unit<\/td>\n<\/tr>\n
Minimum
\nswitching capacity<\/strong><\/th>\n		5 VDC, 1 mA<\/td>\n<\/tr>\n
Relay service life<\/strong><\/th>\nElectrical: 100,000 operations*
\nMechanical: 20,000,000 operations<\/td>\n		ON\/OFF response
\ntime<\/strong><\/th>\n		15 ms max.\/15 ms max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n24 (W) x 100 (H) x 71 (D)<\/td>\nIsolation method<\/strong><\/th>\nRelay isolation<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		Between output bits: 20 M\u03a9 min.
\n(at 500 VDC)
\nBetween the external terminals
\nand the functional ground terminal:
\n20 M\u03a9 min. (at 500 VDC)
\nBetween the external terminals and
\ninternal circuits: 20 M\u03a9 min.
\n(at 500 VDC)
\nBetween the internal circuit and the
\nfunctional ground terminal: 20 M\u03a9
\nmin. (at 100 VDC)<\/td>\n		Dielectric
\nstrength<\/strong><\/th>\n		Between output bits: 2300 VAC for
\n1 min at a leakage current of 5 mA
\nmax.
\nBetween the external terminals and
\nthe functional ground terminal: 2300
\nVAC for 1 min at a leakage current
\nof 5 mA max.
\nBetween the external terminals and
\ninternal circuits: 2300 VAC for 1 min
\nat a leakage current of 5 mA max.
\nBetween the internal circuit and the
\nfunctional ground terminal: 510 VAC
\nfor 1 min at a leakage current of 5 mA
\nmax.<\/td>\n<\/tr>\n
Vibration
\nresistance<\/strong><\/th>\n		Conforms to IEC 60068-2-6.
\n5 to 8.4 Hz with amplitude of 3.5 mm,
\n8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>
\n100 min each in X, Y, and Z directions
\n(10 sweeps of 10 min each = 100 min
\ntotal)<\/td>\n		Shock resistance<\/strong><\/th>\n100 m\/s2<\/sup>, 3 times each in X, Y, and Z
\ndirections<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\nCurrent capacity
\nof I\/O power
\nsupply terminal<\/strong><\/th>\n		Without I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n2.00 W max.
\n\u2022 Connected to a Communications
\nCoupler Unit
\n1.65 W max.<\/td>\n		Current
\nconsumption from
\nI\/O power supply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n140 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_37_2\"<\/td>\n<\/tr>\n
Installation
\norientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_37_3\"<\/td>\n<\/tr>\n
Terminal
\nconnection
\ndiagram<\/strong><\/th>\n		\"3185_sp_37_4\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Electrical service life will vary depending on the current value. Refer to “NX-series Digital I\/O Units User\u2019s Manual” for details.<\/p>\n<\/div>\n<\/div>\n

DC Input\/Transistor Output Unit (MIL Connector, 30 mm Width)<\/h4>\n

NX-MD6121-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input\/Transistor Output
\nUnit<\/td>\n		Model<\/strong><\/th>\nNX-MD6121-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 inputs\/16 outputs<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		2 MIL connectors (20 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSwitching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Output
\nsection
\n(CN1)<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		NPN<\/td>\nInput
\nsection
\n(CN2)<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		For both NPN\/PNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\nRated input
\nvoltage<\/strong><\/th>\n		24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\nInput current<\/strong><\/th>\n7 mA typical (at 24 VDC)<\/td>\n<\/tr>\n
Maximum value
\nof load current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\nON voltage\/
\nON current<\/strong><\/th>\n		15 VDC min.\/3 mA min.
\n(between COM and each signal)<\/td>\n<\/tr>\n
Maximum
\ninrush current<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\nOFF voltage\/
\nOFF current<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between COM and each signal)<\/td>\n<\/tr>\n
Leakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\nON\/OFF
\nresponse time<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Residual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\nInput filter
\ntime<\/strong><\/th>\n		No filter, 0.25 ms, 0.5 ms, 1 ms
\n(default), 2 ms, 4 ms, 8 ms,
\n16 ms, 32 ms, 64 ms, 128 ms,
\n256 ms<\/td>\n<\/tr>\n
ON\/OFF
\nresponse time<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator, I\/O indicators
\n\"3185_sp_38_1\"<\/td>\n		Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\n<\/tr>\n
Isolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute at a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\n<\/tr>\n
Current capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply
\nterminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.00 W max.
\n\u2022 Connected to a Communica-
\ntions Coupler Unit
\n0.70 W max.<\/td>\n<\/tr>\n
Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n105 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_38_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_38_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3185_sp_38_4\"<\/td>\n<\/tr>\n
Disconnection\/Short-
\ncircuit detection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

NX-MD6256-5<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input\/Transistor Output
\nUnit<\/td>\n		Model<\/strong><\/th>\nNX-MD6256-5<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 inputs\/16 outputs<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		2 MIL connectors (20 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSwitching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Output
\nsection
\n(CN1)<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\nInput
\nsection
\n(CN2)<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		For both NPN\/PNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\nRated input
\nvoltage<\/strong><\/th>\n		24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		20.4 to 28.8 VDC<\/td>\nInput current<\/strong><\/th>\n7 mA typical (at 24 VDC)<\/td>\n<\/tr>\n
Maximum value
\nof load current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\nON voltage\/
\nON current<\/strong><\/th>\n		15 VDC min.\/3 mA min.
\n(between COM and each signal)<\/td>\n<\/tr>\n
Maximum
\ninrush current<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\nOFF voltage\/
\nOFF current<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between COM and each signal)<\/td>\n<\/tr>\n
Leakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\nON\/OFF
\nresponse time<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Residual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\nInput filter
\ntime<\/strong><\/th>\n		No filter, 0.25 ms, 0.5 ms, 1 ms
\n(default), 2 ms, 4 ms, 8 ms,
\n16 ms, 32 ms, 64 ms, 128 ms,
\n256 ms<\/td>\n<\/tr>\n
ON\/OFF
\nresponse time<\/strong><\/th>\n		0.5 ms max.\/1.0 ms max.<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator, I\/O indicators
\n\"3185_sp_39_1\"<\/td>\n		Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\n<\/tr>\n
Isolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute at a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\n<\/tr>\n
Current capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply
\nterminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.10 W max.
\n\u2022 Connected to a Communica-
\ntions Coupler Unit
\n0.75 W max.<\/td>\n<\/tr>\n
Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		40 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n110 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_39_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_39_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3185_sp_39_4\"<\/td>\n<\/tr>\n
Disconnection\/Short-
\ncircuit detection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nWith load short-circuit
\nprotection.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

DC Input\/Transistor Output Unit (Fujitsu Connector, 30 mm Width)<\/h4>\n

NX-MD6121-6<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nDC Input\/Transistor Output Unit<\/td>\nModel<\/strong><\/th>\nNX-MD6121-6<\/td>\n<\/tr>\n
Number of points<\/strong><\/th>\n16 inputs\/16 outputs<\/td>\nExternal connection
\nterminals<\/strong><\/th>\n		2 Fujitsu connectors
\n(24 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nSwitching Synchronous I\/O refreshing and Free-Run refreshing<\/td>\n<\/tr>\n
Output
\nsection
\n(CN1)<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		NPN<\/td>\nInput
\nsection
\n(CN2)<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		For both NPN\/PNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 VDC<\/td>\nRated input
\nvoltage<\/strong><\/th>\n		24 VDC (15 to 28.8 VDC)<\/td>\n<\/tr>\n
Operating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\nInput current<\/strong><\/th>\n7 mA typical (at 24 VDC)<\/td>\n<\/tr>\n
Maximum value
\nof load current<\/strong><\/th>\n		0.5 A\/point, 2 A\/Unit<\/td>\nON voltage\/
\nON current<\/strong><\/th>\n		15 VDC min.\/3 mA min.
\n(between COM and each signal)<\/td>\n<\/tr>\n
Maximum
\ninrush current<\/strong><\/th>\n		4.0 A\/point, 10 ms max.<\/td>\nOFF voltage\/
\nOFF current<\/strong><\/th>\n		5 VDC max.\/1 mA max.
\n(between COM and each signal)<\/td>\n<\/tr>\n
Leakage
\ncurrent<\/strong><\/th>\n		0.1 mA max.<\/td>\nON\/OFF
\nresponse time<\/strong><\/th>\n		20 \u03bcs max.\/400 \u03bcs max.<\/td>\n<\/tr>\n
Residual
\nvoltage<\/strong><\/th>\n		1.5 V max.<\/td>\nInput filter
\ntime<\/strong><\/th>\n		No filter, 0.25 ms, 0.5 ms, 1 ms
\n(default), 2 ms, 4 ms, 8 ms,
\n16 ms, 32 ms, 64 ms, 128 ms,
\n256 ms<\/td>\n<\/tr>\n
ON\/OFF
\nresponse time<\/strong><\/th>\n		0.1 ms max.\/0.8 ms max.<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator, I\/O indicators
\n\"3185_sp_40_1\"<\/td>\n		Dimensions<\/strong><\/th>\n30 (W) x 100 (H) x 71 (D)<\/td>\n<\/tr>\n
Isolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC between isolated
\ncircuits for 1 minute at a
\nleakage current of 5 mA max.<\/td>\n<\/tr>\n
I\/O power supply
\nmethod<\/strong><\/th>\n		Supply from external source<\/td>\n<\/tr>\n
Current capacity of
\nI\/O power supply
\nterminal<\/strong><\/th>\n		Without I\/O power supply
\nterminals<\/td>\n<\/tr>\n
NX Unit power
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit or
\nCommunication Control Unit
\n1.00 W max.
\n\u2022 Connected to a Communi-
\ncations Coupler Unit
\n0.70 W max.<\/td>\n<\/tr>\n
Current consumption
\nfrom I\/O power supply<\/strong><\/th>\n		30 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n95 g max.<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3185_sp_40_2\"<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit or Communication Control Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: As shown in the following.
\n\"3185_sp_40_3\"<\/td>\n<\/tr>\n
Terminal connection
\ndiagram<\/strong><\/th>\n		\"3185_sp_40_4\"<\/td>\n<\/tr>\n
Disconnection\/Short-
\ncircuit detection<\/strong><\/th>\n		Not supported.<\/td>\nProtective function<\/strong><\/th>\nNot supported.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n

Connected to a CPU Unit<\/h4>\n
\n
\n

Refer to the user’s manual for the CPU Unit for details on the CPU Units to which NX Units can be connected.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCPU Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-ID3317<\/td>\nVer.1.0<\/td>\nVer.1.13<\/td>\nVer.1.17<\/td>\n<\/tr>\n
NX-ID3343<\/td>\n<\/tr>\n
NX-ID3344<\/td>\n<\/tr>\n
NX-ID3417<\/td>\n<\/tr>\n
NX-ID3443<\/td>\n<\/tr>\n
NX-ID3444<\/td>\n<\/tr>\n
NX-ID4342<\/td>\n<\/tr>\n
NX-ID4442<\/td>\n<\/tr>\n
NX-ID5142-1<\/td>\n<\/tr>\n
NX-ID5142-5<\/td>\n<\/tr>\n
NX-ID5342<\/td>\n<\/tr>\n
NX-ID5442<\/td>\n<\/tr>\n
NX-ID6142-5<\/td>\n<\/tr>\n
NX-ID6142-6<\/td>\n<\/tr>\n
NX-IA3117<\/td>\n<\/tr>\n
NX-OD2154<\/td>\n<\/tr>\n
NX-OD2258<\/td>\n<\/tr>\n
NX-OD3121<\/td>\n<\/tr>\n
NX-OD3153<\/td>\n<\/tr>\n
NX-OD3256<\/td>\n<\/tr>\n
NX-OD3257<\/td>\n<\/tr>\n
NX-OD3268<\/td>\n<\/tr>\n
NX-OD4121<\/td>\n<\/tr>\n
NX-OD4256<\/td>\n<\/tr>\n
NX-OD5121<\/td>\n<\/tr>\n
NX-OD5121-1<\/td>\n<\/tr>\n
NX-OD5121-5<\/td>\n<\/tr>\n
NX-OD5256<\/td>\n<\/tr>\n
NX-OD5256-1<\/td>\n<\/tr>\n
NX-OD5256-5<\/td>\n<\/tr>\n
NX-OD6121-5<\/td>\n<\/tr>\n
NX-OD6121-6<\/td>\n<\/tr>\n
NX-OD6256-5<\/td>\n<\/tr>\n
NX-OC2633<\/td>\n<\/tr>\n
NX-OC2733<\/td>\n<\/tr>\n
NX-OC4633<\/td>\n<\/tr>\n
NX-MD6121-5<\/td>\n<\/tr>\n
NX-MD6121-6<\/td>\n<\/tr>\n
NX-MD6256-5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.<\/div>\n<\/div>\n<\/div>\n

Connected to an EtherCAT Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nEtherCAT Coupler Unit<\/strong><\/th>\nCPU Unit or Industrial PC<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-ID3317<\/td>\nVer.1.0<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-ID3343<\/td>\n<\/tr>\n
NX-ID3344<\/td>\nVer.1.1<\/td>\nVer.1.06 *<\/td>\nVer.1.07<\/td>\n<\/tr>\n
NX-ID3417<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-ID3443<\/td>\n<\/tr>\n
NX-ID3444<\/td>\nVer.1.1<\/td>\nVer.1.06 *<\/td>\nVer.1.07<\/td>\n<\/tr>\n
NX-ID4342<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-ID4442<\/td>\n<\/tr>\n
NX-ID5142-1<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-ID5142-5<\/td>\nVer.1.10<\/td>\n<\/tr>\n
NX-ID5342<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-ID5442<\/td>\n<\/tr>\n
NX-ID6142-5<\/td>\nVer.1.10<\/td>\n<\/tr>\n
NX-ID6142-6<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-IA3117<\/td>\nVer.1.08<\/td>\n<\/tr>\n
NX-OD2154<\/td>\nVer.1.0<\/td>\nVer.1.1<\/td>\nVer.1.06 *<\/td>\nVer.1.07<\/td>\n<\/tr>\n
NX-OD2258<\/td>\n<\/tr>\n
NX-OD3121<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-OD3153<\/td>\n<\/tr>\n
NX-OD3256<\/td>\n<\/tr>\n
NX-OD3257<\/td>\n<\/tr>\n
NX-OD3268<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-OD4121<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-OD4256<\/td>\n<\/tr>\n
NX-OD5121<\/td>\n<\/tr>\n
NX-OD5121-1<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-OD5121-5<\/td>\nVer.1.10<\/td>\n<\/tr>\n
NX-OD5256<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-OD5256-1<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-OD5256-5<\/td>\nVer.1.10<\/td>\n<\/tr>\n
NX-OD6121-5<\/td>\n<\/tr>\n
NX-OD6121-6<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-OD6256-5<\/td>\nVer.1.10<\/td>\n<\/tr>\n
NX-OC2633<\/td>\nVer.1.06<\/td>\n<\/tr>\n
NX-OC2733<\/td>\nVer.1.08<\/td>\n<\/tr>\n
NX-OC4633<\/td>\nVer.1.17<\/td>\n<\/tr>\n
NX-MD6121-5<\/td>\nVer.1.0<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.10<\/td>\n<\/tr>\n
NX-MD6121-6<\/td>\nVer.1.13<\/td>\n<\/tr>\n
NX-MD6256-5<\/td>\nVer.1.10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.
\n* The instructions for time stamp refreshing are supported by CPU Units with unit version 1.06 or later. If you do not use
\ninstructions for time stamp refreshing, you can use version 1.05. Refer to the NJ\/NX-series Instructions Reference Manual
\n(Cat. No. W502) for details on the instructions for time stamp refreshing.<\/div>\n<\/div>\n<\/div>\n

Connected to an EtherNet\/IP Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit
\nversion<\/strong><\/th>\n		Application with an NJ\/NX\/NY-series
\nController *1<\/strong><\/th>\n		Application with a CS\/CJ\/CP-series PLC
\n*2<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		NX-IO
\nConfigurator *3<\/strong><\/th>\n<\/tr>\n
NX-ID3317<\/td>\nVer. 1.0<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n
NX-ID3343<\/td>\n<\/tr>\n
NX-ID3344<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-ID3417<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n
NX-ID3443<\/td>\n<\/tr>\n
NX-ID3444<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-ID4342<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n
NX-ID4442<\/td>\n<\/tr>\n
NX-ID5142-1<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-ID5142-5<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-ID5342<\/td>\n<\/tr>\n
NX-ID5442<\/td>\n<\/tr>\n
NX-ID6142-5<\/td>\n<\/tr>\n
NX-ID6142-6<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-IA3117<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-OD2154<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-OD2258<\/td>\n<\/tr>\n
NX-OD3121<\/td>\nVer. 1.2<\/td>\nVer. 1.14<\/td>\nVer. 1.19<\/td>\nVer. 1.0<\/td>\nVer. 1.10<\/td>\nVer. 1.00<\/td>\n<\/tr>\n
NX-OD3153<\/td>\n<\/tr>\n
NX-OD3256<\/td>\n<\/tr>\n
NX-OD3257<\/td>\n<\/tr>\n
NX-OD3268<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-OD4121<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-OD4256<\/td>\n<\/tr>\n
NX-OD5121<\/td>\n<\/tr>\n
NX-OD5121-1<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-OD5121-5<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-OD5256<\/td>\n<\/tr>\n
NX-OD5256-1<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-OD5256-5<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-OD6121-5<\/td>\n<\/tr>\n
NX-OD6121-6<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-OD6256-5<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-OC2633<\/td>\n<\/tr>\n
NX-OC2733<\/td>\n<\/tr>\n
NX-OC4633<\/td>\nVer. 1.17<\/td>\n<\/tr>\n
NX-MD6121-5<\/td>\nVer. 1.10<\/td>\n<\/tr>\n
NX-MD6121-6<\/td>\nVer. 1.13<\/td>\n<\/tr>\n
NX-MD6256-5<\/td>\nVer. 1.10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: 1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.
\n2. Note: You cannot connect the relevant NX Unit to the target Communications Coupler Unit if \u201c—\u201d is shown in the
\ncorresponding unit versions\/versions column.
\n*1 Refer to the user\u2019s manual for the EtherNet\/IP Coupler Units for information on the unit versions of EtherNet\/IP Units
\nthat are compatible with EtherNet\/IP Coupler Units.
\n*2 Refer to the user\u2019s manual for the EtherNet\/IP Coupler Units for information on the unit versions of CPU Units and
\nEtherNet\/IP Units that are compatible with EtherNet\/IP Coupler Units.
\n*3 For connection to an EtherNet\/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the
\nperipheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect by any other path. If you need to connect by
\nanother path, use an EtherNet\/IP Coupler Unit with unit version 1.2 or later.<\/div>\n<\/div>\n<\/div>\n

Connected to Communication Control Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCommunication Control Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-ID3317<\/td>\nVer. 1.0<\/td>\nVer. 1.00<\/td>\nVer. 1.24<\/td>\n<\/tr>\n
NX-ID3343<\/td>\n<\/tr>\n
NX-ID3344<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-ID3417<\/td>\nVer. 1.00<\/td>\nVer. 1.24<\/td>\n<\/tr>\n
NX-ID3443<\/td>\n<\/tr>\n
NX-ID3444<\/td>\nVer. 1.0<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-ID4342<\/td>\nVer. 1.00<\/td>\nVer. 1.24<\/td>\n<\/tr>\n
NX-ID4442<\/td>\n<\/tr>\n
NX-ID5142-1<\/td>\n<\/tr>\n
NX-ID5142-5<\/td>\n<\/tr>\n
NX-ID5342<\/td>\n<\/tr>\n
NX-ID5442<\/td>\n<\/tr>\n
NX-ID6142-5<\/td>\n<\/tr>\n
NX-ID6142-6<\/td>\n<\/tr>\n
NX-IA3117<\/td>\n<\/tr>\n
NX-OD2154<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-OD2258<\/td>\n<\/tr>\n
NX-OD3121<\/td>\nVer. 1.00<\/td>\nVer. 1.24<\/td>\n<\/tr>\n
NX-OD3153<\/td>\n<\/tr>\n
NX-OD3256<\/td>\n<\/tr>\n
NX-OD3257<\/td>\n<\/tr>\n
NX-OD3268<\/td>\n<\/tr>\n
NX-OD4121<\/td>\n<\/tr>\n
NX-OD4256<\/td>\n<\/tr>\n
NX-OD5121<\/td>\n<\/tr>\n
NX-OD5121-1<\/td>\n<\/tr>\n
NX-OD5121-5<\/td>\n<\/tr>\n
NX-OD5256<\/td>\n<\/tr>\n
NX-OD5256-1<\/td>\n<\/tr>\n
NX-OD5256-5<\/td>\n<\/tr>\n
NX-OD6121-5<\/td>\n<\/tr>\n
NX-OD6121-6<\/td>\n<\/tr>\n
NX-OD6256-5<\/td>\n<\/tr>\n
NX-OC2633<\/td>\n<\/tr>\n
NX-OC2733<\/td>\n<\/tr>\n
NX-OC4633<\/td>\n<\/tr>\n
NX-MD6121-5<\/td>\n<\/tr>\n
NX-MD6121-6<\/td>\n<\/tr>\n
NX-MD6256-5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: 1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version,
\nsupport is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the
\nspecific Units for the relation between models and versions.
\n2. Note: You cannot connect the relevant NX Unit to the Communication Control Unit if \u201c—\u201d is shown in the
\ncorresponding unit versions\/ versions column.<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n

last update: January 22, 2018<\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

Screwless Clamping Terminal Block Type<\/h4>\n

12 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n
\n

* The dimension is 1.35 mm for Units with lot numbers through December 2014.<\/p>\n<\/div>\n<\/div>\n

24 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n

M3 Screw Terminal Block Type<\/h4>\n

30 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n

MIL Connector Type (1 Connector with 20 terminals)<\/h4>\n

30 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n

MIL Connector Type (1 Connector with 40 terminals)<\/h4>\n

30 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n

MIL Connector Type (2 Connectors with 20 terminals)<\/h4>\n

30 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n

Fujitsu Connector Type (1 Connector with 40 terminals)<\/h4>\n

30 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n

Fujitsu Connector Type (2 Connectors with 24 terminals)<\/h4>\n

30 mm Width<\/h4>\n
\n
\"NX-ID<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n\n\n\n\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-ID\/IA\/OD\/OC\/MD Data Sheet<\/a><\/td>\n–
\n[11436KB]<\/span><\/td>\n		Aug 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0XW2R Series Catalog<\/a><\/td>\nG077-E1-03
\n[21666KB]<\/span><\/td>\n		Apr 02, 2018<\/td>\n<\/tr>\n
\"\"\u00a0XW2Z-R Data Sheet<\/a><\/td>\nG126-E1-02
\n[2435KB]<\/span><\/td>\n		Apr 03, 2017<\/td>\n<\/tr>\n
\"\"\u00a0G70[]\/G7TC Table of I\/O Relay Terminal and connectable device combinations<\/a><\/td>\nJ217-E1-02
\n[1206KB]<\/span><\/td>\n		Jun 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0XW2 Series Table of Connector-Terminal Block Conversion Units and connectable device combinations<\/a><\/td>\nG129-E1-02
\n[950KB]<\/span><\/td>\n		Jun 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

A wide range of digital I\/O units from general purpose use to high-speed synchronous control<\/h2>\n","protected":false},"featured_media":1375,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[98,63,72],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1374"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1374"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1375"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1374"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1374"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1374"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}