{"id":1369,"date":"2019-01-02T01:59:11","date_gmt":"2019-01-02T01:59:11","guid":{"rendered":"http:\/\/al-tet-onlinesales.allyoulovetrading.com\/?post_type=product&p=1369"},"modified":"2019-01-02T01:59:11","modified_gmt":"2019-01-02T01:59:11","slug":"nx-sl","status":"publish","type":"product","link":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/product\/nx-sl\/","title":{"rendered":"NX-SL"},"content":{"rendered":"
\n
\n

\u2022 EN ISO13849-1 (PLe\/Safety Category4), IEC 61508 (SIL3) certified.<\/p>\n

\u2022 One connection using Safety over EtherCAT (FSoE) * protocol enables flexible configuration by mixing the Safety Units with standard NX I\/O.<\/p>\n

\u2022 The Safety CPU Unit controls up to 128 Safety I\/O Units.<\/p>\n

\u2022 Hardware and safety circuits can be configured using the Sysmac Studio (Ver. 1.07)<\/p>\n

\u2022 Compliant with IEC61131-3<\/p>\n

\u2022 Safety programs can be standardized and reused efficiently by using POUs for design and operation.<\/p>\n<\/div>\n<\/div>\n

\n
\n
* Safety over EtherCAT (FsoE): The open protocol Safety over EtherCAT (abbreviated with FSoE “FailSafe over
\nEtherCAT”) defines a safety related communication layer for EtherCAT. Safety over EtherCAT meets the requirements
\nof IEC 61508 SIL 3 and enables the transfer of safe and standard information on the same communication system
\nwithout limitations with regard to transfer speed and cycle time.<\/div>\n<\/div>\n<\/div>\n
\n

Safety CPU Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Unit type<\/strong><\/th>\nAppearance<\/strong><\/th>\nSpecification<\/strong><\/th>\nUnit
\nversion<\/strong><\/th>\n		Model<\/strong><\/th>\n<\/tr>\n
Maximum number
\nof safety I\/O
\npoints<\/strong><\/th>\n		Program
\ncapacity<\/strong><\/th>\n		Number of
\nsafety I\/O
\nconnections<\/strong><\/th>\n		I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n<\/tr>\n
Safety CPU
\nUnit
\n(NX-SL3[]00)<\/td>\n		\"3243_lu_1_1\"<\/td>\n256 points<\/td>\n512 KB<\/td>\n32<\/td>\nFree-Run
\nrefreshing<\/td>\n		Ver. 1.1<\/td>\nNX-SL3300<\/strong><\/td>\n<\/tr>\n
\"3243_lu_1_2\"<\/td>\n1024 points<\/td>\n2048 KB<\/td>\n128<\/td>\nFree-Run
\nrefreshing<\/td>\n		Ver. 1.1<\/td>\nNX-SL3500<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Refer to the NX-CSG\/SL5\/SI\/SO Datasheet for details of the NX-SL5[][][] Safety CPU Unit.<\/p>\n<\/div>\n<\/div>\n

Configuration Devices<\/h4>\n

NX-series Communications Coupler Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Appearance<\/strong><\/th>\nSupported
\ncommunications
\nprotocol<\/strong><\/th>\n		NX Unit power
\nconsumption<\/strong><\/th>\n		Maximum I\/O
\npower supply current<\/strong><\/th>\n		Model<\/strong><\/th>\n<\/tr>\n
EtherCAT
\nCoupler Unit
\n*1<\/strong><\/th>\n		\"csm001013831_lu_7_1\"<\/td>\nCommunications cycle
\nin DC Mode *2
\n250 to 4,000 \u03bcs<\/td>\n		1.45 W or lower<\/td>\n4 A<\/td>\nNX-EEC201<\/strong><\/td>\n<\/tr>\n
Communications cycle
\nin DC Mode *2
\n125 to 10,000 \u03bcs<\/td>\n		1.25 W or lower<\/td>\n10 A<\/td>\nNX-EEC202<\/strong><\/td>\n<\/tr>\n
NX-EEC203<\/strong><\/td>\n<\/tr>\n
EtherNet\/IP
\nCoupler Unit
\n*1<\/strong><\/th>\n		\"csm001013831_lu_7_2\"<\/td>\nEtherNet\/IP<\/td>\n1.60 W or lower<\/td>\n10 A<\/td>\nNX-EIC202<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: For details, refer to your local OMRON website.
\n*1 One End Cover NX-END01 is provided with the NX-series Communications Coupler Units.
\n*2 This depends on the specifications of the EtherCAT master. For example, the values are as follows when the EtherCAT
\nCoupler Unit is connected to the built-in EtherCAT port on an NJ5-series CPU Unit: 500 \u03bcs, 1,000 \u03bcs, 2,000 \u03bcs, and
\n4,000 \u03bcs. Refer to the NJ\/NX-series CPU Unit Built-in EtherCAT Port User’s Manual (Cat. No. W505) for the specifications
\nof the built-in EtherCAT ports on NJ\/NX-series CPU Units.
\nThis also depends on the unit configuration.<\/div>\n<\/div>\n<\/div>\n

Automation Software Sysmac Studio<\/h4>\n
\n
\n

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
<\/th>\nNumber of
\nlicenses<\/strong><\/th>\n		Media<\/strong><\/th>\n<\/tr>\n
Sysmac Studio
\nNX-I\/O Edition
\nVer.1.[][] *1<\/strong><\/th>\n		Sysmac Studio NX-I\/O Edition is a limited license that
\nprovides selected functions required for EtherNet\/IP
\nCoupler settings.
\n* Because this product is a license only, you need the
\nSysmac Studio Standard Edition DVD media to install it.<\/td>\n		1 license<\/td>\n—<\/td>\nSYSMAC-NE001L<\/strong><\/td>\n<\/tr>\n
Sysmac Studio
\nSafety Edition
\nVer.1.[][] *2<\/strong><\/th>\n		Sysmac Studio Safety Edition is a license including
\nnecessary setting functions for the safety control
\nsystem.
\n* Because this product is a license only, you need the
\nSysmac Studio Standard Edition DVD media to install it.<\/td>\n		1 license<\/td>\n—<\/td>\nSYSMAC-FE001L<\/strong><\/td>\n<\/tr>\n
Sysmac Studio
\nStandard Edition
\nVer.1.[][] *3*4<\/strong><\/th>\n		The Sysmac Studio is the software that provides an
\nintegrated environment for setting, programming,
\ndebugging and maintenance of machine automation
\ncontrollers including the NJ\/NX-series CPU Units,
\nNY-series Industrial PC,EtherCAT Slave, and the HMI.<\/td>\n		1 license *5<\/td>\n—<\/td>\nSYSMAC-SE201L<\/strong><\/td>\n<\/tr>\n
Sysmac Studio runs on the following OS.
\nWindows 7 (32-bit\/64-bit version)\/8(32-bit\/64-bit
\nversion)\/8.1 (32-bit\/64-bit version)\/10 (32-bit\/64-
\nbit version)
\n* Refer to your OMRON website for details such as
\nsupported models and functions.<\/td>\n		(Media only)<\/td>\nDVD<\/td>\nSYSMAC-SE200D<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1 With the NX-I\/O Edition, you can use only the setup functions for EtherNet\/IP Coupler.
\n*2 Safety Edition can be used with Communication Control Unit and EtherNet\/IP Coupler Unit.
\n*3 The Sysmac Studio Standard Edition with license(s) (SYSMAC-SE[][][]L) provides functions of the NX-I\/O Edition
\n(SYSMAC-NE001L).
\n*4 With the Sysmac Studio Standard Edition with license(s) (SYSMAC-SE[][][]L) version 1.10 or higher, you can use the
\nsetup functions for the EtherNet\/IP Coupler.
\n*5 Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).<\/div>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n

Regulations and Standards<\/h4>\n

NX-series Safety Control Units NX-SL3\/SI\/SO<\/h4>\n
\n
\n
\n\n\n\n\n\n
Certification body<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
T\u00dcV Rheinland *<\/strong><\/th>\n\u2022 EN ISO 13849-1
\n\u2022 EN ISO 13849-2
\n\u2022 IEC 61508 parts 1-7
\n\u2022 IEC\/EN 62061
\n\u2022 IEC\/EN 61131-2
\n\u2022 IEC 61326-3-1<\/td>\n<\/tr>\n
UL<\/strong><\/th>\n\u2022 NRAG (UL 508 and ANSI\/ISA 12.12.01)
\n\u2022 NRAG7 (CSA C22.2 No. 142 and CSA C22.2 No. 213)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* The FSoE was certified for applications in which OMRON FSoE devices are connected to each other.<\/p>\n<\/div>\n<\/div>\n

\n
\n
The NX-series Safety Control Units allow you to build a safety control system that meets the following standards.
\n\u2022 Requirements for SIL 3 (Safety Integrity Level 3) in IEC 61508, EN 62061, (Functional Safety of Electrical\/Electronic\/
\nProgrammable Electronic Safety-related Systems)
\n\u2022 Requirements for PLe (Performance Level e) and for safety category 4 in EN ISO13849-1
\nThe NX-series Safety Control Units are also registered for RCM, EAC, and KC compliance.<\/div>\n<\/div>\n<\/div>\n

General Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel (open)<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to 100 \u03a9 or less.<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating
\ntemperature<\/strong><\/th>\n		0 to 55\u00b0C (The upper limit of the ambient operating temperature is restricted
\nby the installation orientation.)<\/td>\n<\/tr>\n
Ambient operating
\nhumidity<\/strong><\/th>\n		10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\n2 or less: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\nConforms to IEC 61131-2.
\n2 kV on power supply line (Conforms to IEC 61000-4-4.)<\/td>\n<\/tr>\n
Insulation class<\/strong><\/th>\nClass III (SELV)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>,
\n100 minutes each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min
\ntotal)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27.
\n147 m\/s2<\/sup>, 3 times each in X, Y, and Z directions<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 between isolated circuits (at 100 VDC)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC for 1 min between isolated circuits, leakage current: 5 mA max.<\/td>\n<\/tr>\n
Installation method<\/strong><\/th>\nDIN Track (IEC 60715 TH35-7.5\/TH35-15)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Specifications of Individual Units<\/h4>\n

Safety CPU Unit NX-SL3300\/SL3500<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nSafety CPU Unit<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nNX-SL3300<\/td>\nNX-SL3500<\/td>\n<\/tr>\n
Maximum number of safety I\/O points<\/strong><\/th>\n256 points<\/td>\n1024 points<\/td>\n<\/tr>\n
Program capacity<\/strong><\/th>\n512 KB<\/td>\n2048 KB<\/td>\n<\/tr>\n
Number of safety master connections<\/strong><\/th>\n32<\/td>\n128<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\nFree-Run refreshing<\/td>\n<\/tr>\n
External connection terminals<\/strong><\/th>\nNone<\/td>\nNone<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\n[FS] LED, [VALID] LED, [DEBUG] LED,
\n[TS] LED, [RUN] LED
\n\"csm001013831_sp_3_1\"<\/td>\n		[FS] LED, [VALID] LED, [DEBUG] LED,
\n[TS] LED, [RUN] LED
\n\"csm001013831_sp_3_2\"<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n30 \u00d7 100 \u00d7 71 mm (W \u00d7 H \u00d7 D)<\/td>\n<\/tr>\n
I\/O power supply method<\/strong><\/th>\nNot supplied.<\/td>\n<\/tr>\n
Current capacity of I\/O power supply
\nterminals<\/strong><\/th>\n		No I\/O power supply terminals<\/td>\n<\/tr>\n
NX Unit power consumption<\/strong><\/th>\n0.90 W max.<\/td>\n<\/tr>\n
Current consumption from I\/O power
\nsupply<\/strong><\/th>\n		No consumption<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n75 g max.<\/td>\n<\/tr>\n
Installation orientation and
\nrestrictions<\/strong><\/th>\n		Installation orientation: 6 possible orientations
\nRestrictions: None<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Function Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nFunction<\/strong><\/th>\n<\/tr>\n
Setting
\nParameters<\/strong><\/th>\n		Safety I\/O Settings<\/strong><\/th>\nYou make a setting for safety process data communications and
\nconnection with safety I\/O devices.<\/td>\n<\/tr>\n
<\/th>\nSafety Process Data
\nCommunications
\nSettings<\/strong><\/th>\n		You select Safety I\/O Units to perform safety process data
\ncommunications (FSoE communications) and make necessary
\nsettings.<\/td>\n<\/tr>\n
Safety Device
\nAllocation Settings<\/strong><\/th>\n		You set the connection between Safety I\/O Units and safety
\ndevices.<\/td>\n<\/tr>\n
EtherNet\/IP Safety Connection
\nSettings *1<\/strong><\/th>\n		You can register target devices of EtherNet\/IP Safety network and
\nconfigure the connection settings.<\/td>\n<\/tr>\n
Standard I\/O
\nSettings<\/strong><\/th>\n		Exposed Variable
\nSettings<\/strong><\/th>\n		You set whether to expose global variables of the Safety CPU Unit.
\nThe values of exposed variables can be referenced from NJ\/NX-
\nseries CPU Units and NY-series Industrial PCs.<\/td>\n<\/tr>\n
Standard Process
\nData
\nCommunications *2<\/strong><\/th>\n		You set the devices and ports of the Standard I\/O Units for the
\nexposed variables of the Safety CPU Unit.<\/td>\n<\/tr>\n
Safety Task Settings<\/strong><\/th>\nYou define the execution cycle and timing of the safety task and
\nprograms to be executed in the task.<\/td>\n<\/tr>\n
<\/th>\nAssigning Programs<\/strong><\/th>\nYou assign safety programs to execute to the task.<\/td>\n<\/tr>\n
I\/O Map Settings<\/strong><\/th>\nThe ports of Safety I\/O Units used in safety process data
\ncommunications are displayed. You assign device variables used
\nin safety programs to the I\/O ports.<\/td>\n<\/tr>\n
Creating
\nSafety
\nPrograms<\/strong><\/th>\n		Instruction List (Toolbox)<\/strong><\/th>\nA hierarchy of the functions and function blocks that you can use
\nis displayed in the Toolbox. You can drag the required functions
\nand function blocks onto the FBD editor to insert it to a safety
\nprogram.<\/td>\n<\/tr>\n
FBD Programming<\/strong><\/th>\nYou connect variables, functions, and function blocks with
\nconnecting lines to build networks. The FBD editor is used to enter
\nthem.<\/td>\n<\/tr>\n
<\/th>\nAdding FBD Networks<\/strong><\/th>\nYou create FBD networks on the FBD editor to create algorithms.<\/td>\n<\/tr>\n
Inserting and
\nDeleting Functions
\nand Function blocks<\/strong><\/th>\n		You insert and delete functions and function blocks on the FBD
\neditor.<\/td>\n<\/tr>\n
Entry Assistance<\/strong><\/th>\nWhen you enter functions, function blocks, or parameters, each
\ncharacter that you enter from the keyboard narrows the list of
\ncandidates that is displayed for selection.<\/td>\n<\/tr>\n
Commenting Out
\nFBD Networks<\/strong><\/th>\n		You can comment out each FBD network. When a network is
\ncommented out, it is no longer executed.<\/td>\n<\/tr>\n
Converting Programs
\ninto Function Blocks
\n*1<\/strong><\/th>\n		You can convert the safety program into user-defined function
\nblock.<\/td>\n<\/tr>\n
Automatic Programming *1<\/strong><\/th>\nA safety programs can be automatically generated from input and
\noutput signals and expected values of the program.<\/td>\n<\/tr>\n
Creating Variables<\/strong><\/th>\nYou create variables used in safety programs in the global or local
\nvariable table.<\/td>\n<\/tr>\n
User-defined Function Blocks<\/strong><\/th>\nYou create user-defined function blocks.<\/td>\n<\/tr>\n
<\/th>\nHelp Reference *3<\/strong><\/th>\nYou can display the user-defined function block help with the
\npopup menu or shortcut key.<\/td>\n<\/tr>\n
Export\/Import<\/strong><\/th>\nPOUs can be exported and imported.<\/td>\n<\/tr>\n
<\/th>\nPrograms *4<\/strong><\/th>\nYou can export\/import POUs.<\/td>\n<\/tr>\n
User-defined
\nFunction Blocks *3<\/strong><\/th>\n		You can export\/import user-defined function blocks.<\/td>\n<\/tr>\n
Searching and Replacing<\/strong><\/th>\nYou can search for and replace strings in the variable tables,
\nprograms, and function blocks of a Safety CPU Unit.<\/td>\n<\/tr>\n
Debugging<\/strong><\/th>\nMonitoring<\/strong><\/th>\nVariables are monitored during safety program execution. You can
\nmonitor the present values of device variables assigned to Safety
\nI\/O Units and user-defined variables. The values can be monitored
\non the FBD editor or Watch Tab Page.<\/td>\n<\/tr>\n
Changing the Present Values of
\nVariables<\/strong><\/th>\n		You can change the present values of user-defined variables and
\ndevice variables as required. You can do this on the FBD editor or
\nWatch Tab Page.<\/td>\n<\/tr>\n
Forced Refreshing<\/strong><\/th>\nThe inputs from external devices and outputs to external devices
\nare refreshed with a specified value on the Sysmac Studio. The
\nspecified value is retained even if the value of the variable is
\noverwritten from the user program.
\nYou can use forced refreshing on the FBD editor or Watch Tab
\nPage.<\/td>\n<\/tr>\n
Offline Debugging *5<\/strong><\/th>\nYou can check if the control program logic works as designed in
\nadvance using a special debugging function for the Simulator
\nwithout connecting online with the Safety CPU Unit.<\/td>\n<\/tr>\n
<\/th>\nInitial Value Settings
\n*6<\/strong><\/th>\n		You can set the initial values of variables when you start execution
\nof simulation.<\/td>\n<\/tr>\n
Feedback Settings
\n*6<\/strong><\/th>\n		You can set input status that is linked to changes in output status
\nwhen simulator is running.<\/td>\n<\/tr>\n
Simple Automatic
\nTest *7<\/strong><\/th>\n		You can check that expected values of the outputs to the inputs of
\nthe program are designed as intended using the Simulator
\nfunctions of the Safety CPU Unit.<\/td>\n<\/tr>\n
User Memory Usage Monitor *6<\/strong><\/th>\nThe memory usage of the safety control system and usage of
\nsafety network such as I\/O data size are displayed.<\/td>\n<\/tr>\n
Debugging<\/strong><\/th>\nOnline Functional Test *1<\/strong><\/th>\nThis function helps you to check the safety functional operation of
\nthe safety system.
\nYou can produce output device operation relative to the input and
\ncheck whether the system operates as expected. It is possible to
\noutput the check results.<\/td>\n<\/tr>\n
Safety<\/strong><\/th>\nSafety Validation<\/strong><\/th>\nYou append the “safety-validated” information to a safety program
\nwhen you can ensure safety of the program after you complete
\ndebugging.<\/td>\n<\/tr>\n
Changing Operating Mode<\/strong><\/th>\nThere are four operating modes; PROGRAM mode, DEBUG mode
\n(STOPPED), DEBUG mode (RUN), and RUN mode. The RUN
\nmode can be selected only for the validated safety programs.<\/td>\n<\/tr>\n
Mainte-
\nnance<\/strong><\/th>\n		Generating Safety Data Logging
\nSettings File *1<\/strong><\/th>\n		Settings to use the safety data logging function can be generated
\nas a file.<\/td>\n<\/tr>\n
Generating Safety Unit Restore
\nFile *1<\/strong><\/th>\n		A file of safety program and settings to be transferred to the Safety
\nCPU Unit using an SD memory card is generated for Safety Unit
\nRestore function.<\/td>\n<\/tr>\n
Security
\nMeasures<\/strong><\/th>\n		Prevention
\nof Incorrect
\nConnections<\/strong><\/th>\n		Setting the Node
\nName<\/strong><\/th>\n		You set a unique name for each Safety CPU Unit to confirm that
\nyou operate the correct Safety CPU Unit.<\/td>\n<\/tr>\n
Prevention
\nof Incorrect
\nOperation<\/strong><\/th>\n		Safety Password<\/strong><\/th>\nYou can prevent unauthorized access to safety functions of Safety
\nCPU Units by setting a safety password for online operations that
\naffect the safety functions.<\/td>\n<\/tr>\n
Prevention
\nof Theft of
\nAssets<\/strong><\/th>\n		Data Protection
\n(Programs) *4<\/strong><\/th>\n		You can set passwords for individual programs to prohibit
\ndisplaying or changing them.<\/td>\n<\/tr>\n
Data Protection
\n(User-defined
\nFunction Blocks) *3<\/strong><\/th>\n		You can set passwords for individual user-defined function blocks
\nto prohibit displaying or changing them.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Supported only by the Sysmac Studio version 1.07 or higher.
\n*1. Supported only by the Sysmac Studio version 1.24 or higher.
\n*2. Supported if the EtherNet\/IP Coupler is selected with Sysmac Studio version 1.11 or higher.
\n*3. Supported only by the Sysmac Studio version 1.12 or higher.
\n*4. Supported only by the Sysmac Studio version 1.17 or higher.
\n*5. Supported only by the Sysmac Studio version 1.08 or higher.
\n*6. Supported only by the Sysmac Studio version 1.10 or higher.
\n*7. Supported only by the Sysmac Studio version 1.15 or higher.
\nRefer to the SYSMAC-SE[][][] Datasheet for function specifications of the Safety Control Unit.<\/p>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n
\n
\n

\u2022 Relationship between Unit Versions and Sysmac Studio Versions<\/p>\n<\/div>\n<\/div>\n

EtherCAT Slave Terminal and EtherNet\/IP Slave Terminal<\/h4>\n
\n
\n
\u2022 This configuration is used to connect the Safety Control Unit to the EtherCAT Coupler Units, and the EtherCAT Slave
\nTerminal to the built-in EtherCAT master of the CPU Unit via EtherCAT.
\n\u2022 This configuration is used to connect the Safety Control Units to the EtherNet\/IP Coupler Units.<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding version *1<\/strong><\/th>\n<\/tr>\n
Model number<\/strong><\/th>\nUnit version<\/strong><\/th>\nEtherCAT
\nCoupler Unit
\nNX-ECC20[]<\/strong><\/th>\n		NJ\/NX-series
\nCPU Units *2<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		ErherNet\/IP
\nCoupler Unit
\n(NX-EIC202)<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n<\/tr>\n
NX-SL3300<\/td>\n1.0<\/td>\n1.1 or later<\/td>\n1.06 or later<\/td>\n1.07 or later<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
1.1<\/td>\n1.10 or later<\/td>\n1.0 or later<\/td>\n1.10 or later<\/td>\n<\/tr>\n
NX-SL3500<\/td>\n1.0<\/td>\n1.2 or later<\/td>\n1.07 or later<\/td>\n1.08 or later<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
1.1<\/td>\n1.10 or later<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1 Some Units do not have all of the versions given in the above table.
\nIf a Unit does not have the specified version, support is provided by the oldest available version after the specified
\nversion.
\nRefer to the user\u2019s manuals for the specific Units for the relation between models and versions.
\n*2 These Units cannot be mounted to Machine Automation Controllers with NX1P CPU Units. Mount and use an EtherCAT
\nCoupler Unit instead.<\/div>\n<\/div>\n<\/div>\n

CPU Rack<\/h4>\n
\n
\n

\u2022 This configuration is used to connect the Safety Control Units to the CPU Units.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n
Safety Control Unit model and version<\/strong><\/th>\nNX bus master: CPU Unit<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nNX102 CPU Units<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-SL3300<\/td>\nVer. 1.0<\/td>\nVer. 1.30<\/td>\nVer. 1.22<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\n<\/tr>\n
NX-SL3500<\/td>\nVer. 1.0<\/td>\n<\/tr>\n
Ver. 1.1<\/td>\n<\/tr>\n
NX-SL5500<\/td>\nVer. 1.3<\/td>\nVer. 1.31<\/td>\nVer. 1.24<\/td>\n<\/tr>\n
NX-SL5700<\/td>\nVer. 1.2<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
Ver. 1.3<\/td>\nVer. 1.31<\/td>\nVer. 1.24<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

Safety CPU Unit NX-SL3300\/SL3500<\/h4>\n
\n
\"NX-SL<\/div>\n<\/div>\n
<\/div>\n
\n\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-SL\/SI\/SO Data Sheet<\/a><\/td>\n–
\n[2905KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-Series Safety Controller Stand-alone System brochure<\/a><\/td>\nF100-E1-01
\n[1306KB]<\/span><\/td>\n		Feb 15, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series Safety Controller (EtherCAT System) Catalog<\/a><\/td>\nF101-E1-01
\n[1136KB]<\/span><\/td>\n		Feb 15, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

The Safety CPU Unit controls up to 32 Safety I\/O Units.<\/h2>\n","protected":false},"featured_media":1370,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[97,63,72],"product_tag":[],"_links":{"self":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product\/1369"}],"collection":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/comments?post=1369"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media\/1370"}],"wp:attachment":[{"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/media?parent=1369"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1369"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/al-tet-onlinesales.adbridgessolution.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1369"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}