Description
• Use Ethernet to implement various communications protocols.
• Implement FINS message communications using UDP/IP or TCP/IP with a user application on a host computer or with Support Software, such as the CX-Programmer.
• Use the clock on an SNTP server to automatically adjust the clocks in the PLCs connected to the Ethernet network. (An SNTP server is required separately.)
• An FTP server is built in, so files can be used to transfer PLC data between network PLCs and workstations or personal computers with an FTP client.
• Email can be used to send commands to the PLCs, or triggers can be set so that the PLCs will send PLC data or Ethernet Unit status to a host computer.
• The standard UDP/IP and TCP/IP protocols are supported to enable communications with a wide range of devices, workstations, personal computers, and Ethernet modules from other manufacturers.
• The SMTP/POP3/SNTP servers enable the use of host names instead of IP addresses. (A DNS server is required separately.)
Applicable standards
Refer to the OMRON website or ask your OMRON representative for the most recent applicable standards for each model.
Ethernet Unit
| Unit type |
Product Name |
Specifications | No. of unit num- bers allo- cated |
Current consump- tion (A) |
Model | ||||
|---|---|---|---|---|---|---|---|---|---|
| Commu- nications cable |
Communications functions |
Du- plexing |
Units per CPU Unit |
5 V sys- tem |
26 V sys- tem |
||||
| CS1 CPU Bus Unit |
Ethernet Units  |
100BASE- TX Cable |
FINS communications service (TCP/IP and UDP/IP), FTP server function, socket service, mail send service, mail reception (remote command reception), auto-adjustment of PLC’s internal clock, and server host name specification |
Not sup- ported |
4 Units |
1 | 0.38 | — | CS1W-ETN21 |
Note: There is no accessory for the CS-series Ethernet Unit.
Industrial Switching Hubs
| Product name |
Appearance | Specifications | Accessories | Current consump- tion (A) |
Model | ||
|---|---|---|---|---|---|---|---|
| Functions | No. of pors |
Failure detec- tion |
|||||
| Industrial Switching Hubs |
 |
Quality of Service (QoS): EtherNet/IP control data priority Failure detection: Broadcast storm and LSI error detection 10/100BASE-TX, Auto-Negotiation |
3 | No | Power supply connector |
0.22 | W4S1-03B |
 |
5 | No | 0.22 | W4S1-05B | |||
| 5 | Yes | Power supply connector Connector for informing error |
0.22 | W4S1-05C | |||
Ethernet Units Specifications
| Item | Specifications | ||
|---|---|---|---|
| Model number | CS1W-ETN21 | ||
| Type | 100Base-TX (Can be used as 10Base-T) | ||
| Applicable PLCs | CS-series PLCs | ||
| Unit classification | CS-series CPU Bus Unit | ||
| Mounting location | CPU Rack or Expansion Rack | ||
| Number of Units that can be mounted | 4 max. (including Expansion Racks) | ||
| Transfer specifications |
Media access method | CSMA/CD | |
| Modulation method | Baseband | ||
| Transmission paths | Star form | ||
| Baud rate | 100 Mbit/s (100Base-TX) | 10 Mbit/s (10Base-TX) | |
| Transmission media | Unshielded twisted-pair (UDP) cable Categories: 5, 5e Shielded twisted-pair (STP) cable Categories: 100 Ω at 5, 5e |
Unshielded twisted-pair (UDP) cable Categories: 3, 4, 5, 5e Shielded twisted-pair (STP) cable Categories: 100 Ω at 3, 4, 5, 5e |
|
| Transmission distance | 100 m (distance between hub and node) | ||
| Number of cascade connections | No restrictions if switching hubs are used. | ||
| Current consumption (Unit) | 380 mA max. at 5 V DC | ||
| Weight | 200 g max. | ||
| Dimensions | 35 × 130 × 101 mm (W × H × D) | ||
| Other general specifications | Other specifications conform to the general specifications of the CS-series. | ||
(Unit: mm)
CS1W-ETN21
|
Catalog Name
|
Catalog Number
[size] |
Last Update
|
|---|---|---|
 CS1W-ETN21 Data Sheet |
– [709KB] |
Dec 03, 2018 |
Reviews
There are no reviews yet.